This is a great way to get access to the fuel pump without dropping the tank and worrying about all the hoses getting messed up I've done it. Id rather lift the bed now
@MohawkMotors
Жыл бұрын
Yes, absolutely! My preferred method to acces the fuel pump as well
@danswizzle4113
Жыл бұрын
at 2:45... i dont think you understand how jealous i got from how easily you removed that connector, my guy....
@MohawkMotors
Жыл бұрын
lol, some come right apart, some are an absolute battle
@jimervin1637
2 жыл бұрын
Thanks a heck of a lot. You just saved me a lot of money over having someone else do it, barring unforseen problems, of course. But I was told when I bought my truck that the box had already been off once for a fuel pump replacement. First though, there'll be a little matter of removing the canopy. But that's why I have camper jacks.
@MohawkMotors
2 жыл бұрын
Glad to help
@COFFEE-e3p
3 ай бұрын
thank-you mate, please please don,t ever go under a bed or vehicle with only a hydralic jack or hoist....our lives are depending only an o ring...not safe....stay awesome sir !!...funny the remark about the "fire wrench" .
@MohawkMotors
3 ай бұрын
You're welcome! And you're right, I've gotten a bit more safety oriented since this video was posted, I appreciate your concern!
@shimxininahi8024
Жыл бұрын
Sling load tip. Shorten the front or rear chains will level out the bed then bolt hole alignment make installment much easier. Great bed lift hack!
@MohawkMotors
Жыл бұрын
Excellent tip! Thank you!
@thomaskappauf7345
11 ай бұрын
You could also use an engine leveler
@genesloan3175
2 жыл бұрын
Wow! I was going to build wood frame and use ratchet straps to lift my wrecked one off . ..and I have an engine hoist! Smack me in the head! Glad I saw your video, thanks
@MohawkMotors
2 жыл бұрын
Glad this saved you some construction!!
@unclenubzcabin
3 жыл бұрын
Only special equipment needed is an engine hoist; however, you can easily get one from Harbor Freight for cheap. Great video Sir, this was much simpler than most I've seen. I need to do the same for my 3rd Gen Ram 2500.
@MohawkMotors
3 жыл бұрын
Glad it helped, thanks for watching!
@CamarochroniclesV6
Жыл бұрын
Same here any tips for me for that specific modle
@arandom1024
11 ай бұрын
worst case two or three guys should also be able to do it, no?
@unclenubzcabin
11 ай бұрын
@arandom1024 , correct, that's if you have a few friends available to help. That's usually my biggest issue, and I live alone.
@traviscarr6536
8 ай бұрын
Looks like that hoist was almost maxed out in height though. If you don’t have those hooks at the base of the bed then a fella might have to do further rigging or go another route.
@brianblonowicz6738
2 жыл бұрын
Thank you for the video. I used this method almost flawlessly. Very little effort.
@MohawkMotors
2 жыл бұрын
Glad it helped!
@jds5788
11 ай бұрын
Great video. I have an engine hoist but could not envision how this was done. Working on Chevy s10 fuel pump and a forum mentioned using a engine hoist for it. Thanks for demonstrating this.
@MohawkMotors
11 ай бұрын
Glad it helped
@tobiasmadrigalmorales8550
Жыл бұрын
Grate video I tried for hours doing it by my self jack stands and still was not able to do it by my self grate video thanks I know next time keep up the good work my brother
@MohawkMotors
Жыл бұрын
Glad it helped!! Thank you for watching!
@dillion8434
8 ай бұрын
Thanks for the confidence boost. I'm ready to do it!
@MohawkMotors
8 ай бұрын
You got this!
@hackn3y199
20 күн бұрын
can't wait to fire wrench all my truck bed bolts off so i cant weld my frame back together 😂😂
@MohawkMotors
19 күн бұрын
Lol!
@colin8532
3 жыл бұрын
Looks like someone went at that back window with a caulking gun and kitchen spatula or something! LOL. I wish I lived closer to you, I'd buy a box from you in a heartbeat. All the boxes up here are rotted out! How's Holden doing? Are you guys settling in to a new routine yet?
@MohawkMotors
3 жыл бұрын
LOL, yeah I think they managed to get the whole tube on there! Holden is good, eat, sleep, poop, repeat, newborn life, lol. We're getting there, figuring out the quirks and tricks to keeping a 2 year old and a 1 week old taken care of and happy while making time for sleep and our needs also. I'm sure we'll have a good routine locked in soon.
@MustangsTrainsMowers
2 жыл бұрын
A 2006 Ranger 7’ bed minus tailgate and taillights is right at 200 pounds. I bought a replacement bed for my 2009 after a coworker backed into it in spring of 2012. I didn’t get around to swapping it as I was battling Lyme disease, then it got hit in the left rear, then tapped a week later, then finally nailed again in the right rear in 2018 totaling it. I took the smaller check and kept the truck as the frame was still straight. I was going to save the left box side until I slid down a steep snow covered icy driveway and dented the left side of the box.
@MohawkMotors
2 жыл бұрын
Man, sounds like your ranger was a magnet for bumps and accidents. Bummer you never got to put the new bed on it. Happy New Year!!
@boydwalker161
2 жыл бұрын
@@MohawkMotors That truck will get the replacement bed installed after it gets a new fuel pump and clutch.
@JW-rv9cy
2 жыл бұрын
THANK YOU! I feel like an idiot. I got a engine hoist collection dust in the corner and didn't even think about using it! Just got to go get some chains now.
@MohawkMotors
2 жыл бұрын
You're welcome! Hidden in plain sight, happens to me all the time
@jeffreyfelder7981
3 жыл бұрын
Thank you..... I have an 8' bed to replace, this was helpful
@MohawkMotors
3 жыл бұрын
Glad it helped!
@gasgiant7122
2 жыл бұрын
Greetings from UK, hey Jason great no nonsense no BS tutorial video 👍👍👍 you got no workshop but looks like descent weather, you should try UK weather mostly damp & cold apart from a couple of days in July🤣🤣🤣
@MohawkMotors
2 жыл бұрын
Hello and thank you! yeah we're lucky to have about 7 months of pretty decent weather to work outside, getting into cold damp season now though. I'll be working in the garage more and more.
@PredatorOmnivore
2 ай бұрын
Great video. Now try this with a 1997 F250HD -two- fuel tank 8' bed. You cannot get the bumper bolts off because they are blocked by the receiver hitch. The receiver hitch to frame bolts are blocked by the rear fuel tank. Soooooo, off with the bed without removing the bumper or receiver hitch.
@MohawkMotors
2 ай бұрын
That's a perfect example of why I prefer to work on GM products. lol
@TomMack530
2 жыл бұрын
Thanks for shearing, I am taking my truck bed off so I can replace the fuel lines, one of them is leaking a little but need to replace it before the leak get really bad I had that happen to my ion Saturn and had a half a tank and I started it and the fuel tank gone from 1/2 tank to empty and the tow truck guy would not put it on his flat bed
@MohawkMotors
2 жыл бұрын
Glad to help, good luck getting your truck fixed!
@WhatsCookinToday
Жыл бұрын
You talked me out of removing my bed after about 1 minute of watching this lol
@MohawkMotors
Жыл бұрын
lol
@doneadiizua76
6 ай бұрын
I bought a highly rusted F150 2010 I need GIY , the bed definitely needs to be removed and it needs some welding on the running board. Any advices ?
@MohawkMotors
6 ай бұрын
Take your time, go slow, don't get under anything that can crush you.
@doneadiizua76
6 ай бұрын
@@MohawkMotors thanks, thats what I intend to do. I found places to rent engine hoist.
@AhPhoey
Ай бұрын
Your bed looks in great condition. Why were you removing it?
@MohawkMotors
Ай бұрын
I sold it
@mariorrodriguez535
3 ай бұрын
2010 silverado 69.3 bed how many bolts?
@MohawkMotors
3 ай бұрын
should be 8
@elmerkerth3871
8 ай бұрын
Great video I really liked it
@MohawkMotors
8 ай бұрын
Glad you enjoyed it
@myoneblackfriend3151
Жыл бұрын
I was going to have some of my neighbors help. Wow!
@MohawkMotors
Жыл бұрын
A couple neighbors works also. 95% of the tie I'm working by myself and don't really have anybody local to lend a hand so I figure out how to do things by myself.
@BRED23
8 ай бұрын
Guys I need help I’m in Texas need to know if it’s legal to removed my bed and be road legal will keep taillights and plates bcs obviously I need those but would it matter since they will be in the same position just without a bed
@MohawkMotors
8 ай бұрын
I don't know about texas, but in a lot of states you need to have some kind of wheel cover/fender to prevent the tires from throwing debris that could break windshields into the air.
@BRED23
8 ай бұрын
@@MohawkMotors yes I was reading looks like I need mud flaps here in tx
@luis-iy9qr
2 жыл бұрын
Very handy video.. Thanks 👍
@MohawkMotors
2 жыл бұрын
No problem 👍
@olssong7941
3 жыл бұрын
Is it good to remove the bed when it comes to offroading? I have no use for the bed of my pickup
@MohawkMotors
3 жыл бұрын
Personal preference really, depending on what kind of offroading you're doing the added weight of the bed may be beneficial, but if not there's no reason you "need" a bed
@olssong7941
3 жыл бұрын
@@MohawkMotors No advanced stuff, mainly really old abondoned roads and trails
@MohawkMotors
3 жыл бұрын
@Hemi Cuda then it wont hurt to remove it. Just keep your windows up when it's wet, you'll be surprised how much dirt and mud open tires throw , lol
@olssong7941
3 жыл бұрын
@@MohawkMotors Okay, cheers
@olssong7941
3 жыл бұрын
@@MohawkMotors Just a thought, will it help me in mud? Like, i don't have mud tires or anything like that, i'm thinking that the removed weight might make it easier to drive through mud
@dylanbrant194
Жыл бұрын
5:30 That’s awesome all the bed bolts came out. When I tried to remove mine, a couple of them just started spinning and wouldn’t come out. Do you have a solution for getting these out?
@MohawkMotors
Жыл бұрын
Cut the head of the bolt off, either with a sawzall or cutoff wheel, then once you get the bed off you can re weld the female threaded part to the bed crossrail and extract the stud.
@Mr.DirtySouth
2 жыл бұрын
All you need is a couple sockets. Pulls out a torch 😅 hell ya
@MohawkMotors
2 жыл бұрын
I should have said, "just a few sockets, unless the bolts are seized" Can't be frozen if it's liquid.
@Mr.DirtySouth
2 жыл бұрын
@@MohawkMotors it's expected honestly. I bring a sawzaw and grinder with me for almost every "simple" job lol
@MohawkMotors
2 жыл бұрын
Nailed it Cody, like the saying goes, every 5 minute job is 1 frozen or broken bolt from a 3 day endeavor.
@0oJoe
2 жыл бұрын
Right, just a couple sockets and no lift needed. Rolls out an engine lift/hoist. 🤣
@thomasbulmer2593
2 жыл бұрын
Are you putting it on another truck or trailer?
@MohawkMotors
2 жыл бұрын
I;ve done all the above using this method. Removed from one truck and installed on another. Also removed from a truck and loaded onto a trailer for sale. Works great!
@joefudd
11 ай бұрын
No lift? So what do you call that cherry picker engine lift that you just used?
@MohawkMotors
11 ай бұрын
Cherry picker. Engine hoist. I get this comment all the time and I'm not sure how people think it would be possible to remove a bed without either raising it off the truck or lowering the truck out from under it.
@joefudd
11 ай бұрын
@@MohawkMotors your video title said (no lift) when there clearly was one used. Just sayin'. Or did you mean that you didn't lift it by hand?
@MohawkMotors
11 ай бұрын
I meant no two post lift like you always see done on car a truck shows and other youtube channels. Those lifts are not available to most people so wanted to show a way that is readily available, can buy used on marketplace any day for the week or even now ones from amazon or harbor freight for under $300
@joefudd
11 ай бұрын
@@MohawkMotors oh, okay. Thanks.
@cgzimmy
Жыл бұрын
Sounds great but that truck has not seen a life of Central NY winters. We would have more rust on one bolt then he would have on on his entire undercarriage. I wish i could zip zip and a bolt is removed. Need a video with torches
@MohawkMotors
Жыл бұрын
Fair enough. Sounds like you already know what to do though, if the nut insert spins, melt the head off the bolt with a torch to get the bed off the truck, once you have it off, reweld the nut inserts to the crossmembers and extract the seized bolts.
@billsmith5166
Жыл бұрын
Great job, thanks!
@MohawkMotors
Жыл бұрын
No problem!
@OneDollarNoHoller
2 жыл бұрын
Thanks for the video! 👍
@MohawkMotors
2 жыл бұрын
no problem! Hope it was helpful!
@brendanflaherty3339
2 жыл бұрын
Thanks Bro Great Video
@MohawkMotors
2 жыл бұрын
No problem
@davidhannaka1514
3 жыл бұрын
Dave Pulling my 8ft. bed this week, already had the hoist, how much chain do I need?
@MohawkMotors
3 жыл бұрын
I use 2 pieces that are about 10ft long
@tylerzimmerman2119
Жыл бұрын
I replaced my bed but the bed lines don’t match the cab as it did before how do you fix that can anyone tell me?
@MohawkMotors
Жыл бұрын
Coul be a few things. First thing I would check is make sure your cab mounts are all in good condition. These trucks are old and excluding a few very low mileage exceptions, most I've seen are in desperate need of new cab and body mounts.
@timo2829
2 жыл бұрын
Thank you for this
@MohawkMotors
2 жыл бұрын
You're welcome, hope it helped!
@bruce33
Жыл бұрын
Why remove the bumper?
@MohawkMotors
Жыл бұрын
more room to get the bed out/in without banging it agains the cab or bumper
@brendanmacdonsld2macdonald48
2 жыл бұрын
Title: "No lift" Him: "No hoist" Video: "Yeah we gonna use an engine hoist" Very well educated I see lol
@MohawkMotors
2 жыл бұрын
Thanks for watching!
@osvaldomedina3455
3 жыл бұрын
how much money would a 4x2 Bed For a dakota Sport single cab
@MohawkMotors
3 жыл бұрын
Depends on your location and local market. And how nice it is, could be anywhere from $500 to $1500 in my area.
@matthewhatton9471
2 жыл бұрын
Hey buddy I bought that bed from you for the 05 duramax and the cluster whats up!!
@MohawkMotors
2 жыл бұрын
Hey what's up man! Thanks for tuning in!
@mariorrodriguez535
3 ай бұрын
I can use this idea to replace my fuel pump. thank you. I'll find a hoist
@MohawkMotors
3 ай бұрын
Hope it works for you!
@DavidGutierrez-zi4dy
Жыл бұрын
great!!!
@MohawkMotors
Жыл бұрын
Thanks!
@maxwellkripak
3 жыл бұрын
Interesting method.
@MohawkMotors
3 жыл бұрын
Thanks. It's been working pretty well.
@maxwellkripak
3 жыл бұрын
@@MohawkMotors same!
@noahlivingston6840
2 жыл бұрын
Could not having my Evap line hooked up make it do that
@MohawkMotors
2 жыл бұрын
if it's just dangling open yes, it'll create a vacuum leak when the evap solenoid opens
@danielgeng2306
3 жыл бұрын
Nice 👍
@MohawkMotors
3 жыл бұрын
Thanks ✌
@noahlivingston6840
2 жыл бұрын
My 6.0 stumbles when I accelerate but only when 1/4 tank or less. Got 33” mud claws 10ply I can spin those fuckers np. But when I’m rollin it acts like it’s dying sometimes.
@MohawkMotors
2 жыл бұрын
sounds like it's losing fuel prime, like the fuel is sloshing away from the pump.
@noahlivingston6840
2 жыл бұрын
Finally someone uses a cherry picker to lift the bed instead of three friends. SMH. Basic physics.
@MohawkMotors
2 жыл бұрын
Lol, that was a lot of my motivation in making this video. All my mechanic buddies at some point have been like "Hey can you come help me lift xxxx thing?" And every time I'm like "I can, but don't you have a cherry picker?" They'll lift more than engines everybody! HA
@golfr6178
2 жыл бұрын
It’s nice having a tractor with loader! Or a neighbor with one 😊
@ronniemartin8540
2 жыл бұрын
Damn bud. You really want some rust in your eyes huh? Lol.
@MohawkMotors
2 жыл бұрын
Trying to get better about my PPE.
@ndifazio4190
8 ай бұрын
Easy method.....NO LIFT, and then he pulls an engine hoist!.
@MohawkMotors
8 ай бұрын
It's not a lift! It's a hoist.
@dhudson4558
Жыл бұрын
A Hoist is still a lift.🤦♂️
@MohawkMotors
Жыл бұрын
you got me
@raycekindschuh7534
2 жыл бұрын
Removing the bumper for this is not necessary
@MohawkMotors
2 жыл бұрын
correct, but much easier
@raycekindschuh7534
2 жыл бұрын
@@MohawkMotors depends on how your picking the bed off. If you have a lift or 4 guys to carefully pick it straight up the bumpers not an issue. If your alone doing this with a engine hoist, you might rub some paint off on the bumper haha
@MohawkMotors
2 жыл бұрын
lol, fair enough, but all luxuries I don't have. Solo Jason over here. lol
@blendaur4584
2 жыл бұрын
Looks like you need a lift
@MohawkMotors
2 жыл бұрын
Need? No. Would like to have? Absolutely.
@happyl5547
3 жыл бұрын
No special tools , just an engine hoist we all have at home....
@MohawkMotors
3 жыл бұрын
Depends on your definition of special tools. To me, an engine hoist is an essential piece of standard equipment, nothing special about it, especially since you can buy them brand new for under $250.
@LimpD1ckStalker
2 жыл бұрын
perfect for my needs :D
@MohawkMotors
2 жыл бұрын
Hope it helped!
@mikemann1638
10 ай бұрын
Well I call that a lift sorry
@MohawkMotors
10 ай бұрын
You're not the first.
@mikemann1638
10 ай бұрын
Very good vid tho tks
@SuperER18
3 жыл бұрын
“You don’t need any special equipment” “You’re going to need an engine hoist” 😂😂
@MohawkMotors
3 жыл бұрын
LOL, I guess it depends on your definition of engine hoist. To me it's an essential/basic tool if you're going to be working on cars or trucks. I can see how it would be a special tool to others though.
@Jbaaaaak
2 жыл бұрын
On the 3rd gen rams (my truck) the beds are about 300 pounds with the tailgate removed. Very easy to remove it with 4 people!
@MrWolfSnack
Жыл бұрын
@@MohawkMotors I've literally never used an engine hoist let alone can even afford one. Seen a nice one from a car dealer in a scrapyard but they wouldn't let you buy anything.
@embalmed
Жыл бұрын
@@MrWolfSnack They're not terribly expensive, the problem is usually the place to put them... because they're usually in the way.
@keynangonzalez3706
5 ай бұрын
🤣 let me just take out a quick loan
@nolasalvage8841
2 жыл бұрын
No special tools but u need a engine hoist yeah like I have one of those laying around you can just get a couple friends and just lift it this was not convenient
@MohawkMotors
2 жыл бұрын
Everybody has their opinion, in my opinion and engine hoist is a very basic tool, they can be bought for under $150 brand new and even less used, not to mention most people working on cars on any kind of regular basis either have one or know someone that does.
@codypendency9482
3 ай бұрын
You can also just lift it with some people helping you ? like how do you expect to lift something that weighs hundreds of pounds without mechanical assistance lol
@oliverscorsim
2 ай бұрын
Most ppl that work on cars have one 😅
@dellmack1
Ай бұрын
Hoist are cheap-
@jasonfarnsworth5880
4 күн бұрын
You can rent one anywhere it’s hard to find friends brother probably for you
@billsmith5166
Жыл бұрын
I forgot, did you actually need to remove the hitch and bumper? I realize this is an old video, so I understand if you don't respond.
@MohawkMotors
Жыл бұрын
No you don't have to remove the hitch or bumper
@jasonbrockman562
Ай бұрын
Your video was good except there was no need to remove the bumper or hitch. I just did this job after watching your video and decided to try it without removing those and it came right off.
@MohawkMotors
Ай бұрын
You're right, you don't have to remove them, but if you're using a crane that doesn't roll well on a driveway that isn't smooth and you don't want to bang up or scratch up the bed, it's absolutely a good idea.
@omorin34
2 жыл бұрын
I don't know why but I didn't think about using my engine hoist. Just painted my truck and was looking to see how other folks out there did this without scratching anything. Like another commenter, I was going to build a wood frame. Given the price of wood today, glad I saw this. I was also interested to see how the bed was balanced front to back. Personally, if your a home mechanic, I don't think an engine hoist is "special equipment" Seems like I use mine all the time to pull European engines.
@MohawkMotors
2 жыл бұрын
You're not alone, when I needed to get the engine out of my camaro I was going to build a wood frame to lift the car and then it occurred to me to use the engine hoist for that also. Sometimes we automatically overcomplicate things in our head and then a much more obvious/simple solution comes to us when we are actually about to do whatever it is. I completely agree with you, for a home mechanic doing anything more than oil changes and brake jobs, and engine hoist is basic equipment, especially since you can get the for under $200 now. Plus once you have one, you think of all kinds of things you can use it for!
@SOLDOZER
Жыл бұрын
"You dont need any special equipment, just a special engine hoist and $200 of chain".
@MohawkMotors
Жыл бұрын
would hardly call an engine hoist special, you can buy them on facebook marketplace for $50 any day of the week. I used chain, you could use ratchet straps, rope, old extension cords if you wanted, nothing special.
@2005SilverSTi
3 жыл бұрын
Nice video. Clear and to the point. Definitely helpful. Thanks for sharing your method. I'm going to go tackle this project today.
@MohawkMotors
3 жыл бұрын
Thank you! Glad it was helpful!! Good luck with yours, hope it goes smoothly!
@thehandymancenter
Ай бұрын
Hey, this is the first video in this category I checked, I am only half-way through right where the yellow arrows pop up. And I just gotta say, Man, very, very good video. I like your style, calm and cool, unlike me throwing stuff across the yard. :) Neighbors birch much about your trucks? Thanks, pal.
@MohawkMotors
Ай бұрын
Thank you! I appreciate the positive feedback! The neighbors were actually really cool, all older folks that very much believed in letting others do what they want on their property, and doing what they want on their own property, as long as nobody was bothering each other. We've actually moved since this video and have a much nicer place now! Thanks for watching!
@KurtisHogue
Жыл бұрын
“No special equipment needed” *whips out an acetylene torch*
@MohawkMotors
Жыл бұрын
I get this and "whips out engine hoist" all the time. Guess it all depends on your definition of special equipment. Also the torch isn't necessary, a sawzall or grinder with a cutoff wheel would work also.
@codyweien4513
2 жыл бұрын
You don't have to pull the bumper to remove the bed..
@MohawkMotors
2 жыл бұрын
No you don't. But it makes it easier and reduces the likelihood of scratching the bed.
@ronkirkham3410
2 ай бұрын
Great video.. looks like you have alot of good gm trucks.. would like to touch base.. I have an 05 sierra 8.1 I'm working on
@MohawkMotors
2 ай бұрын
can message me through instagram
@adrianalejo5374
29 күн бұрын
I have a 2000 single cab stepside sierra, would it be pretty much the same process to remove the bed?
@MohawkMotors
26 күн бұрын
yes. almost exactly.
@chevymade8547
4 ай бұрын
How to remove the bed bolts if they are stripped. Half my bolts are just spinning and not coming out.
@MohawkMotors
4 ай бұрын
If it's still on the truck, not much option except to cut the heads off the bolts. Cutoff wheel, sawzall, or my preferred method, Acetylene torch all work. Torch is the easiest and fastest, just melt the heads off. Once you have the bed off the frame you can either tack weld the threaded inserts to be able to remove what's left of the bolts, or cut the rails and put new pieces on.
@nathanduckeorth806
6 ай бұрын
I pulled a bed only once in 1985 on a 76chevy pickup, don't look any harder 8 bolts,lol
@MohawkMotors
6 ай бұрын
Yeah, these and the square bodies are pretty similar. I've done both and they're about the same. Square body beds are heavier though, lol
@juanlanda2441
10 ай бұрын
Well, they never said they were strong enough in any accident. 😂. But they will hold your groceries down .
@MohawkMotors
10 ай бұрын
fair enough!
@itsdknation540
Жыл бұрын
is there a place to buy a truck bed the bed on my truck was hit an i need a new bed for my 2016 ram 1500
@MohawkMotors
Жыл бұрын
Lots of places, there are always people selling them on facebook marketplace, truck upfitters often have take off beds for sale, there are even people who import beds from the south or out west. Google search and facebook marketplace search.
@bradcalbick4166
3 жыл бұрын
I am planning to remove mine for my budget paint job. Glad you did this so I could see whether or not those connectors in the bed hold it before I ripped my own out. Thanks!
@MohawkMotors
3 жыл бұрын
Glad it helped!! Good luck with your paint job!!
@albundyrocks2115
Жыл бұрын
It's not necessary to remove the hitch or the rear bumper unless you weren't selling those with the bed. 8 bolts, 1 or 2 ground straps, filler neck and 2 harness plugs is all that's required.
@MohawkMotors
Жыл бұрын
They were going with the bed.
@Itsme83.
Жыл бұрын
Watched the whole thing cause u said no lift needed then u bring out an engine hoist! Ggeezzzuuussss
@MohawkMotors
Жыл бұрын
.
@CamanoRick
Жыл бұрын
Great video - shows it's a bit of a project, but doable. Nicely done.
@MohawkMotors
Жыл бұрын
Yes, thank you!
@glenjones-dgs-9689
2 жыл бұрын
A tree branch with a Come along is another means, as long as you have a tree of course.
@MohawkMotors
2 жыл бұрын
Yup, I've done that in the past
@imonaroll9502
7 ай бұрын
I transported mine flipping it upside down and putting it on top of my other short bed. I put wood pieces that were the size of the stake holes and lined both of them up. Just make sure the wood pieces are long so they won’t rub. Then just ratchet strap it and your done. 😊
@MohawkMotors
7 ай бұрын
Very clever solution
@neilhoogendoorn8045
6 ай бұрын
I had this same exact idea, I plan on picking a bed up soon and plan to make a KZitem/Rumble video about it.
@imonaroll9502
6 ай бұрын
@@neilhoogendoorn8045you just need 4 strong dudes.
@Sxvaqe-_-
Жыл бұрын
Thanks I'm 20 yrs old just bought a 2000 z71 short cab and I don't know nun this will help alot this y KZitem was made💯
@MohawkMotors
Жыл бұрын
Glad I could help
@harh3101
2 жыл бұрын
One thousand blessing for your well made video. Thanks
@MohawkMotors
2 жыл бұрын
Thank you too!
@russellaustin4988
Жыл бұрын
The engine hoist lifts. Just in case you're confused
@MohawkMotors
Жыл бұрын
Thanks. I meant no vehicle lift, but I get it. To a lot of people the hoist is a special tool also.
@Itzbeanzohyop
2 жыл бұрын
Are you in Michigan?
@MohawkMotors
2 жыл бұрын
Maryland
@Allthingsfast517
3 жыл бұрын
I was wondering what state you are located in I’m in the market for a gmc bed 09
@MohawkMotors
3 жыл бұрын
I'm in Maryland, but I very rarely get anything of the 07 or never body style, I don't have enough space to keep them long enough.
@kenlane6655
10 ай бұрын
You said no special tools, but you're using oxy, which is highly dangerous to idiots.
@MohawkMotors
10 ай бұрын
Lol, oxy is a luxury I have, not required, you are right though, can be very dangerous.
@kenlane6655
10 ай бұрын
I used to demo the flammable aspect of the combo by filling a coffee tin with it, banging the lid down and making a hot spot on the outside. Always popped that lid and gave welders an insight as to what could happen. bin there and done that with the accidental explosion on a small scale and I'm a highly qualified welder who lived to tell the tale, hehe. @@MohawkMotors
@boomergroomer6565
2 жыл бұрын
Thanks for the clear instructions 🇨🇦👌
@MohawkMotors
2 жыл бұрын
No problem 👍
@landerosfamily3207
Жыл бұрын
WILL A NBS SILVERADO BED FIT ON A 2000 SILVERADO?
@MohawkMotors
Жыл бұрын
I believe they will bolt on.
@CUSTOMWORKS7.3PSD
2 жыл бұрын
Thats very dangerous for a segment of our population LOL Ya know what i mean hey
@MohawkMotors
2 жыл бұрын
It's all dangerous if you're not careful. I think I know what you mean though.
@johnrengifo618
Жыл бұрын
(No Lift) uses an engine hoist to lift lol.
@MohawkMotors
Жыл бұрын
It's a hoist. Basic tool.
@stanleylosh1899
Жыл бұрын
I just put the extensions on my forks.
@MohawkMotors
Жыл бұрын
I didn't have forks.....
@dcraexon
2 жыл бұрын
replaced adjustable extension for the lift just like HF , to pick 350 motors out of big Chevy cars , the box tube had to be grinded about a mill , drilled the holes and heat and hammer in on the sides, of the drilled part of the box tube to get it to fit , A little thicker and longer ext. cost about. $40. Need some counter balance in the back, for bigger stuff. They are not as heavy duty as the ones are used to use and the extension was super short but what do you expect for under 200 bucks
@MohawkMotors
2 жыл бұрын
I've seen lots of people modify them. Like you said under $200, they're not the best ever, but they're great for the price!
@mattluckeydotcom
2 жыл бұрын
Thanks for making this video! Easy as can be!
@MohawkMotors
2 жыл бұрын
You're welcome! Glad it helped!
@thomaswatkins2031
9 ай бұрын
Title says no lift clickbait?
@MohawkMotors
9 ай бұрын
Maybe I should change the title to (NO 2 POST LIFT)
@kentuckytrapper780
3 жыл бұрын
Great video man, keep'um coming
@MohawkMotors
3 жыл бұрын
Thanks, will do!
@Mr572u
Жыл бұрын
When did the bumper come off?
@MohawkMotors
Жыл бұрын
I took it off for a little extra room, isn't necessary to remove the bumper.
@markwoten6679
Жыл бұрын
Why are you saling the bed?
@MohawkMotors
Жыл бұрын
Didn't need it, so sold it
@ronkirkham3410
2 ай бұрын
What state are you in
@MohawkMotors
2 ай бұрын
Pennsylvania
@Swanlord05
Ай бұрын
Or get 4 friends
@MohawkMotors
Ай бұрын
I'm not popular enough, it's nearly impossible for me to get 4 friends together at the same time.
@NealORussa
2 жыл бұрын
How much do you normally sell a bed for? I have a nice 2007 Silverado classic long bed. Champagne colored like this one.
@MohawkMotors
2 жыл бұрын
It depends on whether it's long bed or short bed, stepside or fleetside and the condition it's in. Anywhere from $300 to $900 depending on those factors.
@NealORussa
2 жыл бұрын
@@MohawkMotors thanks for the reply! Looking to put on a flatbed.
Пікірлер: 406