With rotors out of the way, what would you like to see in our next All in one factory? - I'm thinking Nuclear power!
@Sacrive94
Жыл бұрын
Hey TotalXclipse. I'm a huge fan of yours. I challange you to make one for Motors, since you already have a rotor factory blueprint :D
@dusk9910
Жыл бұрын
The underdog choice: stators
@ludi489
Жыл бұрын
@@dusk9910 stators would be amazing for a 2-3 click Motor factory too
@jpmoboat4914
Жыл бұрын
I'm all for something more advanced, like nuclear fuel rods, if that's even possible in a 4x4
@Thebuird
Жыл бұрын
Cool lighting blueprints for walls and ceilings
@Ystrruc
Жыл бұрын
When you make an adjustment or mistake while building it. Can you please just remove that portion of it and show the correct one? Multiple times I've had to put down machines only to 2-3minutes later, after the entire floor has been built, re-adjust the whole room to make it work. Great guide Thanks!
@ociredefinilrac4599
Жыл бұрын
yes, I'm having the exact problem, he even cuts in part when you need to see if it's correct what are you doing but you can't see it
@teozard
9 ай бұрын
"I have to push them back". Why are you like this? Did you wake up that day and choose violence?
@lilpain1997
Жыл бұрын
Do you really have to cut some parts out? Its annoying seeing pieces put down in the next shot that you didnt bother to mention
@sirjerbius4624
26 күн бұрын
Ikr
@Minib34ts
9 ай бұрын
One small suggestion for future guides that would be amazing and very nice if you did do it, a To-Do list of the buildings needed to build the blueprint in full so it's well easier to follow for playthroughs without Advanced options turned on for unlimited resources
@rogerrrrrrrrrrr
10 ай бұрын
I made this with the alternate recipes (cast screws and bolted plates) slightly less efficient at 9/min but only needs 2 power shards. And the space on each floor is a lot more roomy. This guide helped a lot with the concept but it’s good with the alternates too!! Great vid.
@espenpaulsen428
6 ай бұрын
You should really make the video all over again when you make changes to the build mid in
@cloud09gaming
Жыл бұрын
When I build these I always make 2 changes. 1: making the lines load balanced instead of manifold. 2: Adding in a sink for overflow so it will always be running. Plus me being a picky person I have it so there is almost zero clipping. Watching this, for me to do that with this one is going to super tricky if even possible. Cause the sink always has to be on the bottom floor. Oh well, challenge time lol. These box factories have really been an amazing thing, so it's super appreciated.
@TotalXclipse
Жыл бұрын
Damn I appreciate the effort adding the sinks and load balancing these. Good luck with the nuclear fuel rod build next week though 😅
@Lastxbreath5
9 ай бұрын
The amount of times I had to remove nearly an entire floor because you refused to cut out a mistake and just put in the correct build almost made me want to quit making this design entirely. Please just include the full correct setup the first time instead of saying "I just had to move this back a step" without showing what you even did to correct everything. Otherwise a nice guide.
@jakepierce3227
Жыл бұрын
I’ve watched all of these and it inspired me to make a blueprint factory for steel beams and pipes. Not sure how many a minute it puts out but it it’s filled up 2 double storages. Now I need to do some routing with a smart spitter to a ticket machine.
@JennyA
8 ай бұрын
Man, this one tried my patience getting it to work.
@n8mo
Жыл бұрын
Wow, this is super space efficient! Wicked design
@hansfischer8529
10 ай бұрын
please if you make this guides then do it properly, if you do something wrong and then later say "i moved it ever so slightly" that means everyone following step by step will do the same mistake...
@Boundyy
9 ай бұрын
I just did this and I'm absolutely frustrated as hell I spent like 25 mins just to have to redo half of it
@Ramash440
Жыл бұрын
I love these compact factories. Say no to sprawl, say yes to density.
@StelznerGaming
5 ай бұрын
ngl this one was a bit rougher than the other compact builds. Got it done but def a pain lol. Please record the re-doing process tho. Saying something has to go a specific place then later saying nevermind it goes here really can make things hard to follow. Besides that awesome build and guide!
@comradeeighteightseven6775
8 ай бұрын
I strongly advice to all beginners think before try to perform those factories on early tiers of game. Just lost whole day 'til i coped with this blueprint. Take something simplier and wider.
@TastyTardis
Жыл бұрын
Pretty nice guide, although I found it quite hard to follow at times
@themeatpopsicle
Жыл бұрын
love the "Factory In A Box" concept!!
@snowbeards
Жыл бұрын
Clicked thumbnail to see what specs this pre-built PC has but it appears to just make rotors
@TotalXclipse
Жыл бұрын
🤣🤣🤣 now you know my inspiration
@MrCaseyRey
Жыл бұрын
Wow, great work making these cubes look nice! That is very difficult to do, I am very impressed
@PatriotAr15
Жыл бұрын
I dont build blueprints with the first floor when it comes to factories. For two reasons. 1. I find it easier to lay out a first floor foundation manually and then place the factory blue print on top of that. Much easier to line up the walls and other elements with the foundations than to try and line up blueprint foundations with the existing foundations where I intend to place the factory. Blueprints that include first floor foundations are waaaaaay too finnicky to place compared to first floor foundationless. And less importantly,... 2. It saves slightly on vertical height.
@mingospup
Жыл бұрын
You rock man. Just finished the setup for the plates factory... very clutch.
@IsThatDrak
Жыл бұрын
Great tutorial! even if i hate the combat clippy design xD well instructed
@LightWarriorK
Жыл бұрын
I'm not a fan of blueprint factories, but this is a great series! At the very least will help with the efficiency and space usage of my starter factory. Thanks!
@Lord_Sunday
Жыл бұрын
They are perfect for early game, unfortunately blueprints don’t unlock until after they are needed. But I’m really fond of doing two layer arrays without walls that can be placed inside larger buildings.
@SBJ696
Жыл бұрын
Love these guides! On my first play through, trying to complete phase 3.
@AidenKemp-qq8wc
10 ай бұрын
Im trying to complete phase 2
@aaron2669
Жыл бұрын
Lovin these only thing i would think to add is either a materials list/building count list
@AidenKemp-qq8wc
10 ай бұрын
when you put it in the blueprint maker it gives you a materials list
@dylandiaz5144
3 ай бұрын
you make me want to break my moniter but W video ig
@deanzap3658
9 ай бұрын
Can we get. Steel blue print...beams and pipes oneclick build please
@Realpuro99
Жыл бұрын
I know this was a month ago, but could you do the more advanced things, from the advanced steel production?
@realityforward
Жыл бұрын
this is amazing and I love using it
@sumbody694
Жыл бұрын
I just want them in regular build so I can start making easy mega factories. The blueprints are going to evolve my buildings by factors, cant wait.
@fuloran1
Жыл бұрын
Any way to make these without glass? I'm a Patron and was surprised that I can't use the beginner factories as a beginner since I dont have a way to get quartz yet.
@Goofball523
Жыл бұрын
First one😂
@Zierk11001
Жыл бұрын
is the background music from KSP?
@Silvergum
Жыл бұрын
thumbnail looks like a cooler master pc case
@ChrisPalmer84
Жыл бұрын
Love these guides! I'm having an issue with this one though. I'm trying to run the catwalk ramp from the first floor to the second floor. I start with the stairs, as in the guide, then I work to the corner. From the corner you use two ramps, but this leave me 1 meter below the next floor. Any ideas what I'm doing wrong?
@armytech8098
11 ай бұрын
Same issue...
@animehardstyle1318
Жыл бұрын
I would like to know what other people think, but for me using 9 Powershards at that stage of the game is simply unfeasable. (For just one component)
@leikegielen3090
Жыл бұрын
Space is pretty much infinite and shards are rare/time consuming to farm. Id rather use those on miners and power generation instead of saving a bit of space. That being said the build looks nice.
@LiLBitsDK
Жыл бұрын
@@leikegielen3090 rare? go look at the online map... they are definetly NOT rare... make a scanner... bet you can get 30 shards in which ever immediate are you are standing in
@KurtRo4444
Жыл бұрын
I shard almost everything. I like smaller factories
@ociredefinilrac4599
Жыл бұрын
@@LiLBitsDK the problem is the energy, if you use a shard the energy is not proporsional and you end up suing more energy than what it cost you with a 2/3 constructor, it's not the best thing using them on the farms
@LiLBitsDK
Жыл бұрын
@@ociredefinilrac4599 they changed it so it doesn't use extreme amounts of more power, they use a little more but it ain't bad at all
@timothydevries3704
Жыл бұрын
Love the idea but I can’t handle it, It’s to crammed for me
@VTrucker777
3 ай бұрын
Where blueprint link
@TotalXclipse
3 ай бұрын
All the blueprints are on Patreon
@clownglass07
9 ай бұрын
great vid but god damn. please just remake the video if you find an issue like that with the constructors. i totally lost motivation to continue cause you just shortly mentioned it and moved on with the video!
@saucecode5276
8 ай бұрын
Well not sure what he pushed back at around 5:58 so i gave up on this video.
@RpNBaH
6 ай бұрын
Please why would you make the tutorial wrong and make so many unnecessary cuts?
@thefarc7222
Жыл бұрын
I stuck in 6:07 i can place my elevator against the wall
@armytech8098
11 ай бұрын
I used a conveyor pole, placed so i could run the conveyor belt to it at 90 degrees. That a made it so the conveyor lift could snap to it. It was a weird placement, and I wish he had been more clear.
@sewshy3243
Жыл бұрын
Could you maybe follow through with your tutorial? instead of changing it every 2 goddam minutes get it right its not hard
@TotalXclipse
Жыл бұрын
What do you mean instead of changing every 2 minutes?
@ociredefinilrac4599
Жыл бұрын
@scythklez and when he change something after he builds it
@eliaszockt74
11 ай бұрын
why all youtubers want money for that? 💀
@connor7272
Жыл бұрын
Yeah um im not making this, im way too new to this game
Пікірлер: 77