Bison's TR86 puts the rim within reach for youth basketball players. See how easy it is to adjust the goal height, install the system on existing basketball hoops, and remove for storage. Contact Bison's friendly product specialists with questions at 800--247-7668 or request a quote at www.bisoninc.com.
Transcript:
Easy up will mount easily to virtually any single rim basketball goal age 10 and under supervised use only. Where hanging from the rim or dunking is not allowed. Rim height can be set from six and a half foot to nine foot in six inch increments by mounting the rear framework at the desired location. Make sure all wing nuts are tightened before use. In this example the rim is set to be at seven foot remove the rim from the stored position and place in the playing position by removing the t-bolt and fully engaging the slots in the rim plate to the studs in the backboard. Secure the rim in the playing position with the t-bolt. Remove the two Wing nuts to allow the folding frame to be rotated and then re-locked at 90 degrees for installation. Place the extended frame on the top of the existing Rim making sure the two small rear tabs on the frame are secured under the rear of the original rim. Disengage the rim attachment lever and pull downwards to allow the lever cam to go behind the front of the rim the lever will spring back up make sure the net is not interfering with the cam. Rotate and re-engage the rim attachment lever making sure that the rim is secure in both the front and the back. Apply 50 pounds of pressure to the front of the rim to ensure that easy up is properly secured reverse the entire process to remove and for easy storage.
Негізгі бет Спорт Easy-Up Youth Mini Goal Installation
Пікірлер