Eaton Cutler Hammer SVX 9000 Series AC Drive Basic Start Up presented by Katie Rydzewski for Galco TV. Buy the items featured in this video at 800-337-1720 or visit: www.galco.com/s...
The SVX9000 is a compact, modular solution to variable speed applications; with sensorless vector control technology coupled with an adaptive motor model and sophisticated ASIC circuit features. The model automatically identifies motor parameters for both the sensorless vector mode and the U/f mode, keeping track of changes in the parameters over time. The vector control is carried out in a system of stator flux coordinates, which is immune to small variations in measurements and motor parameters. The sophisticated sensorless flux vector control achieves the dynamic precision of closed loop motor control over most of the speed range:
SVX9000 Series Features:
Performance Drive
Open Loop Vector
0.75 - 200hp
208V to 480V Models
NEMA 1 & 12 Available
Steady state speed error: Less than 0.5%
Torque rise time: Less than 10 ms
Low ripple in the torque
High immunity to resonance vibrations
High starting torque: 200% - depends on motor/drive sizing
High starting current: 2.0 x IH
Suitable for multi-motor drive systems
High‑speed applications, max output frequency 7200 Hz - with special application
For more Eaton AC Drives visit: www.galco.com/s...
To find more Eaton Drives go to: www.galco.com/g...
And for the full line of Eaton Cutler-Hammer Products visit: www.galco.com/f...
Galco is a Factory Authorized Stocking Distributor for Over 150 Brands of Industrial Electrical & Electronic Automation, Controls and Component Products; On-Site and Send-In Repair Services for Industrial Control & Automation Products for Over 2,000 Brands; Engineered Systems Integration, Retrofits & Upgrades for Variable Speed Drives, CNC, PLC Systems, Dynamometers & Test Stand Applications. Visit us online at www.galco.com or call us at 800-337-1720.
www.galco.com/s...
With respect to the usage, installation or assembly of any products described in this video, Galco Industrial Electronics, Inc., a Michigan corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician.
GTV, Galco, galco.com, Galco Industrial Electronics, and Galco Industrial Electronics, Inc. are registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of Galco Industrial Electronics, Inc., a Michigan corporation.
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, Galco is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warrantees of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will Galco, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.
Негізгі бет Eaton Cutler Hammer SVX 9000 AC Drive Basic Start Up
Пікірлер: 22