Very good and simple mod with a big improvement 🙂🙂👍👍👍👍👍👍👍👍
@danielemulazzi1615
3 жыл бұрын
Woww...che gran bel lavoro di precisione....molto utile ...lo devo fare anche al mio Patriot e Arizona ... complimenti... ciao dall'Italia
@benfred8
3 жыл бұрын
very excited about this mod ill let you know how it go
@bcochener
3 жыл бұрын
Nice work. Huge improvement.
@purepr2010
Жыл бұрын
Excellent job
@scalercenthusiasm6983
3 жыл бұрын
Great video! can,t wait to modify my mini z rubicon!
@donaldsneffe
3 жыл бұрын
Then check the Mini-Z oil filled shock mod video ;-)
@scalercenthusiasm6983
3 жыл бұрын
@@donaldsneffe I have watch it tiwic😂,very helpful!
@danielemulazzi1615
3 жыл бұрын
Con questo video ...mi son convinto a iscrivermi al tuo canale ... ciao dall'Italia
@therealpb674
2 жыл бұрын
Are you able to provide the exact measurements of the o rings? Inner/outer/thickness? I ordered the correct inner diameter referenced but they are not as thick and you seem to have more friction. I think that is my point of failure. Fun project and thanks for all these videos!
@donaldsneffe
2 жыл бұрын
They are 1 mm in diameter, so ID 2.5 mm, OD 4.5 mm.
@therealpb674
2 жыл бұрын
@@donaldsneffe Ahh!! I was off! Thanks for the response ordering these now
@vinceguerra1310
2 жыл бұрын
Great mod! Do you have any advice on how to widen the track of the fms k10 without having any parts 3d printed? Thanks! Keep up the great work.
@donaldsneffe
2 жыл бұрын
Thank you. Not really, sorry, I know a lot of people have troubles. SCX24 axles have different diameter, so SCX24 wheel wideners do not work... wider rims and tires could help. Do not have a K10, so did not mess around with this so far.
@carlosjuarez7449
2 жыл бұрын
Hey, where did you get those washers? Lol!
@kmle6832
2 жыл бұрын
Gudjob sir..
@PhilBrindley
2 жыл бұрын
Great video and explaination, thank you. Could you please provide Some more detail on the glue you used, or maybe a link to it? Thanks.
@donaldsneffe
2 жыл бұрын
Thank you. Glue: Toolcraft Ropid 150 no. 886514 (www.conrad.at, .de, .ch, .com). More detailed video (same procedure): kzitem.info/news/bejne/q65qtKeBs2KKmXo See comments of this (Mini-Z) video: Loctite 401 should also work, someone commented (I did not test it).
@PhilBrindley
2 жыл бұрын
@@donaldsneffe superb, thank you!
@SRCE2070
2 жыл бұрын
How are these working yet? Still holding oil?
@donaldsneffe
2 жыл бұрын
Yes.
@SRCE2070
2 жыл бұрын
@@donaldsneffe Thank you! supplies are ordered.
@bezhon
2 жыл бұрын
What is the size of this shock in MM?
@ka4172
2 жыл бұрын
Denke das sind die bestmöglichen Dämpfer für wenig Geld.
@StiloNautica
Жыл бұрын
Where did you get those from?
@donaldsneffe
Жыл бұрын
From the Patriot.
@courtlandkiser7140
2 жыл бұрын
What’s the length of the 2.5mm screw
@donaldsneffe
2 жыл бұрын
This is not important at all, you simply use it "for help". Cannot be too long.
Пікірлер: 33