Hi I have levo 2023 alloy version with old style bar display, which speed box you guys recommended, will speedbox 3.0 just work for me?? Not interested with phone connection or any fancy stuff. Just want never ending pedal support.
@SpeedBoxTuning
7 ай бұрын
Hello. Yes, SpeedBox 3.0 for Specialized is optimal for your e-bike 😊
@davidollerhead
23 күн бұрын
I have a specialized vado sl, with the older tcu (the led bars). I dont feel i need an app, which speedbox units will be compatible?
@SpeedBoxTuning
22 күн бұрын
Hi. If you have a TCU with LED, you can use SpeedBox 3.0 for Brose (activation - + - + on the handlebars) or SpeedBox 3.0 for Specialized (tuning is still active after installation under the TCU unit).
@pjakkeri
4 ай бұрын
I have turbo levo comp carbon gen 3, will speedbox 3.0 work with it?
@2007zodiac
21 күн бұрын
Hi there,, i sure hope you can help me here, it would be MASSIVELY appreciated.. i've just recently purchased a specialized TURBO VADO SL 4.O, 2024 EDITION.. i've also just received my speedbox 3.0 box also....NOT THE B-TUNING ONE!!!!! Do i just take-out the tcu unit and connect it? or do i have to fully Disconnect the battery at the crank?? many many thanks in advance..
@SpeedBoxTuning
20 күн бұрын
Hi. It doesn't matter if you don't have the B.Tuning version. You install the SpeedBox under the TCU unit. Tuning will still be active after installation and the max speed will be set to 50 km/h.☺
@2007zodiac
20 күн бұрын
@@SpeedBoxTuning so I wouldn’t need to Disconnect the main battery near the crank?
@SpeedBoxTuning
19 күн бұрын
@@2007zodiac Although this is a simple operation, we recommend that you remove the battery from the e-bike and put it back in after installation, just in case 🙂
@2007zodiac
19 күн бұрын
@@SpeedBoxTuning just in case of what????? Do you mean the battery in the TCU?...or..the main battery?, as there's a fixing that you can't get too behind the crank, which would require the removal of the pedal-arm, and the crank, which requires a crank extractor, which is a massive-job!!, a job that i'm not prepared to undertake!!!!!, which will result in me sending the product back to you!!, for a full refund, as this is not what i had expected to do!!!... this is a vadoSL. not the normal vado, which you just take the big battery-off!!!.. are you sure of my model???? as you said its easy??.IT IS NOT!!!!!!!!
@SpeedBoxTuning
18 күн бұрын
@@2007zodiac If it's a problem to pull out the main battery, you don't have to do it. Just install the SpeedBox under the TCU (that's the simple operation) and that's it. We wish you many happy miles.
@AndyMialkowski-ct9sz
3 ай бұрын
There is a challenge to embrace. DJI drives as well as ZF or Pinion. Do you plan to tackle this subject?
@SpeedBoxTuning
3 ай бұрын
Good day. Thank you for your question. We currently do not deal with DJI. Maybe later. It depends on what the demand will be.
@AndyMialkowski-ct9sz
3 ай бұрын
@@SpeedBoxTuningOf course, this is still a song of the future, but it's not that far off.
@siwwanooi3720
Ай бұрын
I just get my SppedBox 3.0 for Specialized. I don't want a complicated setup. AFTER Installation, I just need to POWER ON - OFF - ON again. That's ALL? I no need to DO any EXTRA setting, That will make my SPECIALIZED to the DEFAULT setting of SpeedBox 3.0? What Next should I do? What is the NEW speed Limit now? Please explain. Thank You Very Much. ---- A M KHOR
@SpeedBoxTuning
Ай бұрын
Hi. The only "complication" is that after installation, the e-bike must be turned off and on twice for calibration and tuning activation. After that, the tuning is still active with a preset max speed of 50 km/h. That's all. Only if you would like to change the set max speed, go to TURBO mode and then switch the assistance modes 3x down, 3x up (- - - + + +) You can find all the information here www.speedbox-tuning.com/p/speedbox-3-0-for-specialized#1890
@BogdanNichev
5 ай бұрын
I have Spcialized Levo Turbo Carbon. Can I use the speed Box 3.0 with the original TCU or I have to switch to LED Display? And how I can set it up because I tried but no success?
@SpeedBoxTuning
5 ай бұрын
Hello. If you have a MasterMind TCU and you don't have an SL motor at the same time, SpeedBox 3.0 for Specialized will work and you don't have to change the display. If you can't set the tuning, can you describe where exactly you have a problem with the setting?
@rgdorfo
Ай бұрын
Olá. Tenho uma turbo levo e não é a SL, é motor brose 2.2, esse 3.0 de TCU serve?
@SpeedBoxTuning
Ай бұрын
Olá. Sim, é compatível. Você pode escolher entre SpeedBox 3.0 para Brose (opção para ativar/desativar o tuning) ou SpeedBox 3.0 para Specialized (fácil instalação).
@siwwanooi3720
Ай бұрын
I am now in Glasgow. I have 3 units of Specialized TURBO LEVO COMP Carbon. Can you refer me to Glasgow Bicycle shop that I can get SPEEDBOX 3.0? Thanks
@SpeedBoxTuning
Ай бұрын
Hello. We don't have major distributors in Glasgow. You can try Country Cycles Killearn Ltd.
@stanchan7502
Ай бұрын
Hi, which version should i get for my vado 5.0 IGH?
@SpeedBoxTuning
27 күн бұрын
Hi. Unfortunately, we do not yet have a suitable product for IGH yet. Thank you for your understanding.
@seepel
2 ай бұрын
How fast can you deactivate IT for people with Speed restrictions?
@SpeedBoxTuning
2 ай бұрын
Hello. SpeedBox will enable the speed limiter to be unlocked. Once activated, the speed of the e-bike is limited only by the pedaling frequency.
@sQueezij
4 ай бұрын
what is setting the wheeldiameter for? getting the right speed displayed?
@SpeedBoxTuning
4 ай бұрын
Hello. Yes. It is not necessary to set the wheel circumference. It is an added feature that allows you to verify and set the exact circumference of the wheel, which enables an absolutely accurate speed reading.
@densleysimilien5325
5 ай бұрын
I have a luckeep x1 lite is it optimize for my ebike ?
@SpeedBoxTuning
5 ай бұрын
Hello. It is not suitable for rear hub motors, only for mid-drive.
@seepel
2 ай бұрын
How to set it up with tcu and SL Motor without Display?
@SpeedBoxTuning
2 ай бұрын
Hello. If you do not have a display, you can only set in SpeedBox App via bluetooth. So the correct product is SpeedBox 3.0 B.Tuning for Specialized www.speedbox-tuning.com/p/speedbox-3-0-b-tuning-for-specialized#1906
@erikmtb
7 ай бұрын
SRAM powertrain available??
@SpeedBoxTuning
7 ай бұрын
Hello. Which motor do you have? Specialized?
@erikmtb
7 ай бұрын
@@SpeedBoxTuning no Sram Brose it's the same motor as a specialized
@SpeedBoxTuning
7 ай бұрын
@@erikmtb If you have a Di-2 and an automatic transmission, the SpeedBox will not be compatible with your e-bike.
@erikmtb
7 ай бұрын
@@SpeedBoxTuning no Di2, it's Sram powertrain,so eagle transmission and a Sram/ brose motor.(same as specialized) Gasgas,propain,nukeproof,transition are the top models with Sram powertrain. I have a gasgas mxc6 with an autoshift function.
@SpeedBoxTuning
7 ай бұрын
@@erikmtb Autoshift is a problem. There is a different communication and tuning will most likely not work 😒
Пікірлер: 49