I used your install video to install an Eco Battery 48v 105Ah Skinny lithium bundle in my 2014 RXV. I used other you tube videos also, but I found yours to be my most useful. I made a mistake thinking I had a metal battery tray (it was plastic - my bad) and got the skinny - but it included a new metal tray that fit with little trouble. Really appreciate your detailed, step by step approach. Couldn't have done it without your video. Thank you so much.
@PalmettoBatteryPros
Жыл бұрын
Hey Wayne, man I really appreciate that.
@ReadTheBible33
Жыл бұрын
Hey I have some questions. Is it better to have multiple batteries say 312 V batteries or just one 36 V battery lithium? Also my car already has some speed control or modification on it supposedly gets up to 24 miles an hour but I've only done 22. That being said with getting a lithium am I in danger of burning out my motor? I'm assuming it's a stock motor.
@PalmettoBatteryPros
Жыл бұрын
No danger with motor. The controller is set to give power the motor can handle.
@Glitched-PanAmerica
7 ай бұрын
Good morning, what CAN connection from the battery/voltage meter cable goes to the charger CAN connections. There are two coming from the voltage meter cable(from battery)? In your video at minute mark 3:49. Thanks in advance!
@PalmettoBatteryPros
7 ай бұрын
The signal wire on the charger output plugs into either of the small dangling ports of the LCD wiring harness. It’s a new feature.
@TheGunnAgency
7 ай бұрын
What can you do with the extra open space? We go to the beach a lot and sand will be all up inside the belly of the cart.
@PalmettoBatteryPros
7 ай бұрын
There is a dealer called Arc’em. They make inserts to fit in that space. Very helpful. Search the business, then on their site look for the link to their custom products.
@Jeeptj1300
Жыл бұрын
GREAT INSTALL VIDEO , WHAT IF YOUR CART already had a voltage reducer do you run both or switch to the new 30a . and new fuse block ? i like the fitment of the battery in the txt looks great
@PalmettoBatteryPros
Жыл бұрын
I would run two or the new one.
@criminalmindsclips8381
5 ай бұрын
Hey, I just received the Eco Battery 105ah 48v kit for my tempo. Similar to yours, it also incorrectly states on the top that the continuous discharge rate is 150A and not 175A, along with a 500A max 3 second discharge instead of 600A max 3 second. Was this a misprint or something? I don’t want to install it if I haven’t gotten the battery I ordered, so looking to hear what you say. Thanks!
@PalmettoBatteryPros
5 ай бұрын
It is a factory misprint
@johnrodriquez8447
Жыл бұрын
installed skinny 52V in 96 txt dcs, despite not having reed switch anymore, the power supply turns off to accessories when placing in reverse and then again when placing in forward. I am assuming the reverse switch ( 2 microswitches with cam lever)shuts off power intermittingly. Is there a workaround to this. Running Alltrax XCT controller as well.
@PalmettoBatteryPros
Жыл бұрын
You could bypass and run the long orange to the positive post of the battery.
@joshuacovey1061
Жыл бұрын
If I am installing this on a TXT with a Navitas A/C conversion (so no stock controller), do I still need to energize the reed switch bypass by attaching that orange wire to the positive post on the battery?
@PalmettoBatteryPros
Жыл бұрын
No, I don’t believe that switch is required on the Navitas controller.
@ReadTheBible33
Жыл бұрын
Also I'm trying to get a few more MPH if I get a lithium battery thinking of going with this battery or the Allied. Does having the speed controller on my car already immensely help or do I need a new motor whisper or some other gadget New controller? Any Is input helps.
@PalmettoBatteryPros
Жыл бұрын
You’ll get a couple MpH with lithium, but speed is mostly a controller issue
@jerry4012
Жыл бұрын
So that orange wire gets 3 way connected to the white and yellow on the ignition?
@PalmettoBatteryPros
Жыл бұрын
Correct, the cold side of the key switch. Different switches can have different wire colors, I would recommend testing voltage at the battery - and your positive lead to the key switch post. One shouldn't have voltage until the key switch is turned into the on position.
@jerry4012
Жыл бұрын
@@PalmettoBatteryPros got mine working just like you said. I have another question, do you know if any 2 inch wheel spacers fit the txt? I tried a set of orion's but the stock ezgo studs are too short to thread the acorn lugs all the way.
@vindn7556
Жыл бұрын
I’m still confused, does the orange wire get connected to the positive side of the battery or the cold side of the key switch.
Пікірлер: 22