When I get a 2.3 Ranger, the only aftermarket engine equipment will be Gale Banks gear. No one else holds themselves to as high a standard.
@tonycastle5136
3 жыл бұрын
2016 f150 3.5 ecoboost, I've done both of these products and did the monster exhaust system. Honestly I can say that those numbers aren't even close to what I have experienced, what banks is claiming is way more than I have gotten out of it. I feel I've definitely been taken.
@johnjones4096
5 ай бұрын
Did you do a custom tune? If so, who did your tune? Did you data log and send the log to the people who tuned it so they can make nessassary adjustments? You don't need anything but the the intake and exhaust and custom tune throw the rest of that shit away. A aftermarket intercooler and VTA blow off valve and a good set of hot and cold inlet tubes and down pipes with HI flow cats helps too. You should make decent numbers with a set up like that. Then you could always upgrade to some garrett turbos. I will say the more you do the less reliable the vehicle can get. When you have something that runs like a scalded dog, your foot has a hard time staying out of it.
@stevenkrupp5732
5 жыл бұрын
Is the Derringer ready for sale for the second GEN 3.5 eco-boost?
@FordMaverickFanatic
4 жыл бұрын
Love it Gale! Any possibility of seeing a Derringer available for the Ranger 2.3L EcoBoost? I am loving the whole Derringer setup and all of its features. Thanks!
@brandongrant6004
6 жыл бұрын
This is good stuff!! Just getting to know the eco boost, was a big n/a proponent for a long time due to easy 'bolt on' options but I'm starting to like the turbo chargers and these days and this is incredible! Must have been under the rock for a while eh?!!
@johnjones4096
5 ай бұрын
Does this intake also fit the 2021 ford f150 3.5 ecoboost? I know the motors changed in 2017 but does the scoop and filter assembly still mount the same as 2021?
@rapidrabbit898
6 жыл бұрын
1:00 "May consume small children or pets"
@bradeenm2848
5 жыл бұрын
LOL. Thanks for pointing that out.
@gift3rs
5 жыл бұрын
How about some 3.5 love for the Transit
@timothyryan2847
4 жыл бұрын
Where's the derringer for 2019 3.5 ecoboost?
@greggzumwalt6039
6 жыл бұрын
When are you releasing the Raptor Intake and tune setup?
@stevekacludis7718
5 жыл бұрын
I have a 2017 f150 3.5 ecoboost, do you make a derringer for my application? Does this void warranty?
@TheNolesfan94
5 жыл бұрын
Steve Kacludis that’s the engine he is talking about
@bmstylee
5 жыл бұрын
Generally aftermarket tuning voids warranties.
@DonkeyEvo
5 жыл бұрын
Any products for the 2019 3.5?
@MrSlade62
5 жыл бұрын
I have a 2018 3.5 Black Widow edition would love to see what Banks can do for my rig !! I have been driving all kinds of diesels From Cat- to internationals … this is the first Turbo gas motor I have had and I am really enjoying it....but as always I want to get a bit more and Banks have , in my mind , have lead the market in turbo enhancements and protections to increase performance and longevity From pickup trucks to the semi so now for gas I am really excited to see what your team can do for this new class …. well new to me.. I have entered my personal info on your home site hope to hear back soon !!
@ega0117
5 жыл бұрын
Do you make that for the Expedition?
@skrsys
3 жыл бұрын
Any ETA on the Derringer for 2020 f150 3.5L?
@waynes.2983
5 жыл бұрын
His products are really well thought out aren't they.
@Midnight_Rider96
4 жыл бұрын
Anything available for the 3.5 eb taurus sho?
@ethanhoullahan5423
6 жыл бұрын
I can see the LML Duramax in the background. Is banks ever going to sell the aftermarket exhaust manifolds that are on that engine?
@kieranwilliams2080
2 жыл бұрын
Why don’t they have an intake for 2018+ ecoboosts?
@Thereaper1999
5 ай бұрын
I have a 2018 ford escape 1.5 liter ecoboost what can I do for it
@jaym7369
Жыл бұрын
2023, still no turbos, intercooler for the 3.5 Ecoboost
@bastro3320
7 ай бұрын
MR banks are you planning to do a revision for this cold air intake for a 2023 model 3.5 eco, im very interested and enjoy and trust your work!!
@IMiss_The90s
4 жыл бұрын
Is there an intake available for the 2020 F150 3.5 EB?
@bankspower
4 жыл бұрын
No currently, however, we have one in development. No eta on the release date yet.
@BSTREEEEEET
3 жыл бұрын
@@bankspower WAITING!
@macro820
6 жыл бұрын
You should make this for more Makes/Models
@joed.4038
3 жыл бұрын
if true then make a intercooler for the 5th Gen explorer sport!
@bankspower
3 жыл бұрын
The Ford Explorer is currently not on our radar for intercooler development. Sorry.
@rimmersbryggeri
6 жыл бұрын
will ithe 2.0 one fit a duratec he block?
@mikemoore6784
6 жыл бұрын
Is there anything for the 3.5 / 3.6 SHO?
@ProDigit80
6 жыл бұрын
Isn't the ecoboost series Direct injection, known to have carbon deposit issues on the intake valves?
@EthanJones3010
6 жыл бұрын
all 2018-19 ecoboost 2.7 and 3.5 have dual injection both port and direct injection
@ProDigit80
6 жыл бұрын
@@EthanJones3010 Sucks for all pre-2018 models then :)
@WillSmith-en7dj
5 жыл бұрын
@@ProDigit802013 eccoboost f150 i installed a catch can. even better than the new trucks!! I don't put the by products into my motor any more. I catch about 12-20oz of water per 500-1000 miles.
@ProDigit80
5 жыл бұрын
@@WillSmith-en7dj Looks pretty useless then! I change oil once every 7k miles, sounds like I'll need to equip my car with a diaper of some sorts, at the amount of water it collects.
@buellb0y
5 жыл бұрын
Add a catch can in inline with the egr, and it will eliminate all or most of the carbon deposit issues on the intake valves.
@miketrujeque1329
5 жыл бұрын
Any products for my 17 f150 5.0?
@bankspower
5 жыл бұрын
We offer a Ram-Air intake, Monster Exhaust and AutoMind flash tuner. Ram-Air intake: www.bankspower.com/i-2585 Monster Exhaust: www.bankspower.com/i-2092 AutoMind flash tuner Part No. 66410 +49hp/+62lb-ft
@triplemotor
6 жыл бұрын
Turbos are excellent for making power but, my question has always been, ONE...what lubricates the turbos when the engine is turned off and TWO, since these engines are direct injection , what cleans the back of the intake valves.?..???...
@EthanJones3010
6 жыл бұрын
all 2018-19 ecoboost 2.7 and 3.5 have dual injection both port and direct injection
@jaydunbar7538
5 жыл бұрын
@@joshdrobny93 they don't, Patrick may as well be asking what's lubricating the engine while it's off.
@randyschmidt19
5 жыл бұрын
The turbos are lubricated exactly like the rest of the engine. It has a pressurised oil feed and a return back to the pan. Engine off no oil supply. Stock turbos are also generally water cooled just like the engine. Aftermarket turbos generally are not water cooled and coking of the bearings was a concern and there used to be lots of turbo timers on the market. Haven't seen one for sale in years though
@randyschmidt19
5 жыл бұрын
@@joshdrobny93 sorry man I replied to you and I meant to the OP
@gavinlee9478
8 ай бұрын
@@randyschmidt19the 18+ ecoboosts reverse circulates water and coolant back through the turbos after about 10 minutes or so of being off. Found this out when I was sitting in my truck after I got home and heard the turn on and whirring of the pump
@bradshaw106
3 жыл бұрын
Seems like you guys lost interest in the ecoboost support? !!
@bigjoe1_
5 жыл бұрын
Anything for 3.5 SHO
@bankspower
5 жыл бұрын
Are you referring to the 3.5L in the Explorer or Taurus?
@AtonementVarsityFootball
5 жыл бұрын
Taurus SHO
@bankspower
5 жыл бұрын
Unfortunately, we not. We are laser focused on all of our light /medium duty diesel and gas trucks.
@punitm85
6 жыл бұрын
What about the Eco boost 1.0 L
@natehawkins2910
6 жыл бұрын
Punit M ahh the India turd 💩
@360fanboy360
6 жыл бұрын
Yeh that's coming too he just announced it.
@mememaster147
5 жыл бұрын
They could make something to stop the heads cracking/leaking, lol.
@templarrising6299
6 жыл бұрын
What about the RAM eco-diesel
@johncholmes643
6 жыл бұрын
Junk
@nicparker3809
6 жыл бұрын
it just overloads the driver with numbers... I get it..
@diydrivenGA
5 жыл бұрын
Banks....please get into passenger vehicles!
@nicparker3809
6 жыл бұрын
I see a lot of parts and it is just a methanol injector ...Seem like you could have reduced the price and simplified it ... China makes more money making MORE PARTS for round eye. You should buy your own molds and do the work inhouse. Also more power means all the other parts are under greater stress....
Пікірлер: 66