Adjustable End Links available here: goo.gl/SN9j0S
On cars with modified suspensions and ride height, clearance between the sway bar and the drive axle becomes an issue.
As the car is lowered, the sway bar and axle geometry is changed slightly causing the sway bar to contact the axles at certain points of suspension travel. The ECS Adjustable Sway Bar End Links move the sway bar away from the axles enough to gain the needed clearance to stop that annoying condition.
Made of 100% stainless steel with polyurethane bushings, they will not only continue to look great but give an improved feel over stock bushings. Includes 3 different length adjusting bolts allowing you to tailor it to your particular application. Instead of buying parts over and over, our kit allows use on a stock vehicle now, and a modified car later.
This tutorial is provided as a courtesy by ECS Tuning.
Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise its safety.
Although this material has been prepared with the intent to provide reliable information, no warranty (express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will ECS Tuning, Incorporated or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.
Негізгі бет ECS Tuning: MKIV ECS Adjustable Sway Bar End Links Sets
Пікірлер: 11