Hi very good video and usufull, i d'ont understand HOW you conect to power suply your galetto i have mine fb54 reworked - what power supply you use ? wires? maybe you have un link to bayed this conectors/wires/adapoters - thx
@thebook2109
2 ай бұрын
thanks !!!
@fordfocusgarage2083
2 жыл бұрын
Good video thank you👍
@YOYODiagnostic
2 жыл бұрын
Thanks for watching. 👍
@mohamedbouabsa3493
2 жыл бұрын
Thanks man
@YOYODiagnostic
2 жыл бұрын
Thank you for viewing. 😊
@rmt5820
Жыл бұрын
Hi and thank you for your useful video! My oem Ecu is Sagem 3000! I want to if there is any way upgrade this Ecu with change upgrade eeprom or some chip? I saw some of ur videos it seems ur expert on this job.
@gameiro59
2 жыл бұрын
Hello, did you rework the BDM100? I'm asking because one year ago you tried it with Dimsport and didn't work, but now with CMD technologies it manages to read Bosch EDC16.
@jonaskaae7881
3 ай бұрын
no update?
@rsporsche
Ай бұрын
Can you link the BDM100 rework video? I searched and couldn't find it
@djjaskolmechanik3509
2 жыл бұрын
Why can Fgtech Galleto be damaged when powered from the socket in the housing? Great movie regards 🙂
@YOYODiagnostic
2 жыл бұрын
Hello. in 2013-2014 when I bought it I tried 3 times on an Renault EDC16 and the same number of times I burned Bipolar Transistor BC337.
@JerryPrado
Жыл бұрын
Nice, thanks. Is there a video on the BDM100 rework yet?
@YOYODiagnostic
Жыл бұрын
Hello, No but maybe I will do one.
@djbertinho1984
2 жыл бұрын
Hi I have a bad ECU edc16c3. PEUGEOT 307 1.6 HDI 110HP 2004 With bdm100 its possible a full backup and install it at new ECU ? Or i need to do more things ? My bdm100 dind come with Bosch frame. Can i solder small pins and just plug the cable or need to mod something ? Thanks for your help
@YOYODiagnostic
2 жыл бұрын
Hello. At first there were no BDM frames, everything was done by welding the cables. It is possible but you need to know pinout at each, or the simplest use the pins that come with BDM and weld them after connecting the cable that comes with BDM in the package.
@othmaneelkihel2930
2 жыл бұрын
Hi can I have the software for bdm100
@brianshuker-wstf
2 жыл бұрын
Where did you buy the bdm bench from thanks great video m8
@YOYODiagnostic
2 жыл бұрын
Hello. To be honest I don't remember, probably from AliExpress or eBay. Almost all sellers are equally liars. You need to consider changing all the chips to be functional.
@legin3753
2 жыл бұрын
👌👌👌👌
@YOYODiagnostic
2 жыл бұрын
Thanks 👍
@crosskicker5346
7 ай бұрын
hello mate, can a BDM100 or Ktag read a bmw bike ECU without opening the case, i mean can one these device or others can read a ECU throught the ECU connectors side? if not how can i read it using ktag or bdm100? thank you.
@YOYODiagnostic
7 ай бұрын
Hello. No is not possible. Kt200 or Dfox can do this job.
@autotechnikertt
8 ай бұрын
is the adapter for BDM 100 clone and ktag the same or are the pinouts diffrent >
@YOYODiagnostic
8 ай бұрын
Same
@autotechnikertt
8 ай бұрын
Thanks . Also med9 ktag reads 4k file .
@battyroshko1431
Жыл бұрын
Can you recommend the FGTech Galletto for a first time user?
@YOYODiagnostic
Жыл бұрын
I don't recommend you to use clones but if you want a good clone go for KT200 or Fox Flash
@mmfix3851
2 жыл бұрын
Question do you know ktag can read the CPU tricore tc1796 but only chip? I mean if i remove the Chip from board?
@YOYODiagnostic
2 жыл бұрын
Ktag is designed to read only from the ECU. Unfortunately it does not allow this function to be read separately from the ECU. I am convinced that there are programmers who can do this.
@mmfix3851
2 жыл бұрын
@@YOYODiagnostic Do you know some programmers or info. Because for more easy jobs probably is better to read the Chip itself than to have boards without pinout schematic.
@YOYODiagnostic
2 жыл бұрын
@@mmfix3851 I don't understand why you want to do this. First of all, in order to do this, you have to apply a high temperature for a long time. Chances are you'll burn that chip, and let's not forget that there are 2 types of chips, the one with external legs and the one without. It is very difficult to put a chip in the perfect position. To do this is the same for you if you try to read 15 ECU. If you only refer to Eeprom memories it is ok.
@mmfix3851
2 жыл бұрын
@@YOYODiagnostic for me the soldering is not a problem 15+ years repair Phones and laptops just now starting to work on cars but im super newbie but i see there is some ECUs can be read and other with the same processor can not because there is no pin outs information. Thats why i ask if there programmer that read the chip itself. check my about me and coonttact me.
@YOYODiagnostic
2 жыл бұрын
@@mmfix3851 👍
@florentbr83
2 жыл бұрын
Great! How did you fixed your BDM100? What was the issue?
@YOYODiagnostic
2 жыл бұрын
Hello. I will post a video with this programmer on how to fix it. Thanks for watching.
@bartqch
Жыл бұрын
@@YOYODiagnostic i cant see this on your video
@user-tl9uh6rh4n
2 жыл бұрын
👍
@YOYODiagnostic
2 жыл бұрын
👍
@emiliocerda2068
2 жыл бұрын
I have a clone ktag and I would like to read it without the bdm is it possible?
@YOYODiagnostic
2 жыл бұрын
Hallo. Ktag can not read true the OBD
@emiliocerda2068
2 жыл бұрын
Which clone tool do you recommend for a low price to do this job?
@Salman-sc8gr
2 жыл бұрын
Will BDM100 work on cloning Peugeot BSi?
@YOYODiagnostic
2 жыл бұрын
Hello. No
@Salman-sc8gr
2 жыл бұрын
@@YOYODiagnostic thanks, so which programmer will ork on Bsi for Peugeot /Citroen? And another? The Petrol ecu Bosch ME7 4.6 on v6 after driving starts misfiring, can BDM delete immobiliser so I can use another ecu?
@YOYODiagnostic
2 жыл бұрын
@@Salman-sc8gr For BSI you need a programmer who reads Eeprom. it can be from 20 euros to 1000 euros, it depends on what you want to buy. BSI at Peugeot can be read through Eeprom.
@Salman-sc8gr
2 жыл бұрын
@@YOYODiagnostic thank you.
@YOYODiagnostic
2 жыл бұрын
@@Salman-sc8gr 👍
@ermirseriani7717
2 жыл бұрын
hello master,how are you,i want to ask you ,i am thinking to buy an expensive tool maybe for me}, i do not know which one by autotuner and flex,help me choose please
@YOYODiagnostic
2 жыл бұрын
Hello. Flex is very ok and has very good customer service. I've been using it for almost 2 years and it works great.
@ermirseriani7717
2 жыл бұрын
@@YOYODiagnostic you saying that more better flex (online or offline mode )should i chose
@ermirseriani7717
2 жыл бұрын
?
@YOYODiagnostic
2 жыл бұрын
@@ermirseriani7717 this is just my opinion. for EDC 17 has online checksum correction. the function is very useful
@piovo5222
2 жыл бұрын
for reading edc17 is KTAG Clone good?
@YOYODiagnostic
2 жыл бұрын
not really . I recommend Autotunner
@piovo5222
2 жыл бұрын
@@YOYODiagnostic I only need it for reading maybe once or twice a year, for my car and other personal cars? The ecu edc17cp02
@YOYODiagnostic
2 жыл бұрын
@@piovo5222 Use scanmatik whit PCM Flash software, is cheaper than Autotunner
@piovo5222
2 жыл бұрын
@@YOYODiagnostic this is cheapest way to read and write on bench?
@hardfixintosimple
2 жыл бұрын
Hi. Is these hardwares are clones from china?
@YOYODiagnostic
2 жыл бұрын
Hello. All Clones are from China. 👍
@tirannozavr2093
7 ай бұрын
@@YOYODiagnostic Hello! I have galletto like yours, but the program closes after selecting MPC 55x/56x and clicking OK. I don't understant why ?
@YOYODiagnostic
7 ай бұрын
@@tirannozavr2093 Software Problem.
@ermirseriani7717
2 жыл бұрын
unbeliveboll
@YOYODiagnostic
2 жыл бұрын
👍
@henryford4337
3 ай бұрын
Hello, Thanks For All The Helpfull Videos. Is there any programmer that can read Saturn Bosch 0261 204 591 ME3.1 Ecu. Thanks
@YOYODiagnostic
2 ай бұрын
Hello, I have no experience with this car. I don't want to tell you something wrong.
Пікірлер: 67