Suggest other tests here if you want and I’ll get to them if I have the ability. This stuff has its limits I’m sure, but it seems a great all round option.
@antimatter4733
6 жыл бұрын
Maybe a post use comparison with other oils.
@tacticalcenter8658
6 жыл бұрын
Benjamin Chen they only sell the one now. one was a lube (for pivot or detent) and the other for rust prevention.
@JimSkeltonKnives
6 жыл бұрын
Solid review, much appreciated. A note to everyone... the key is to RUB IT IN, not just spray and wipe. And using a microfiber cloth will not only allow the formula to penetrate better than a paper towel, but it will be gentler on your blade finish as well.
@mohdzaudikhasni8829
6 жыл бұрын
Will work on Rolex watches?
@birdlaw1019
6 жыл бұрын
I've used mine on a few watches (and glasses) and it makes a big difference with the finger print resistance.
@mohdzaudikhasni8829
6 жыл бұрын
@@birdlaw1019 nice thanks for your reply.
@cutlerynovice9305
5 жыл бұрын
@Jim Skelton Jim, is hdci being brought back too? If so what would be a timeframe it will be available? Thank you
@SuperSteelSteve
6 жыл бұрын
Bar Keepers Friend ! My go to for rust removal.on knives. It neutralizes the rust and removes it with no scratches. And getting surface rust on a knife is no big deal. Its oxidation... Relax lol. Yea.... Leave it there for years and it could cause some serious damage.... but its not gonna happen overnight. Awesome review and a great product
@valkyriesurvives5109
6 жыл бұрын
Yeah but people who like to take care of their things don't like seeing rust on their favorite knigr
@valkyriesurvives5109
6 жыл бұрын
Knife***
@SuperSteelSteve
6 жыл бұрын
@@valkyriesurvives5109 i take care of all my knives... But an M4 blade being used and then put in my sweaty pocket is gonna get some surface rust.... Its literally not a deal at all. Just because i don't see some minor surface rust or patina as a detriment to the knife doesn't mean i dont take care of it.
@tacticalcenter8658
6 жыл бұрын
i always have some bar keepers friend for when anything around the house or the knives start to rust. it cleans it up well. very good tool to have in the toolbox.
@kraftzion
Жыл бұрын
I am not convinced yet. I would like to see a comparison to a car wax. The one I am currently using is megulars techwax 2.0 . If edci can do better I will buy some. Even though I use it on k390, m4, rex45, and cruwear I think a test on something like 1095 will show a more definitive result. Every question I have seems to lead me to your channel, good job! Edit: 1095 or d2 lol, I think d2 rusts worse. At least 1095 doesnt suffer from galvanic corrosion.
@BornIn1500
6 жыл бұрын
Alright, I've held back long enough. These videos are becoming creepy. One more knife video and I'm unsubbing.
@CedricAda
6 жыл бұрын
I love my subscribers so much XD
@barkingspider2007
5 жыл бұрын
Great video, I applied the product to a Spiderco PM2 in M4. Hope to avoid the patina while storing in the box. The Spyderco Spidichef you recommend has been cutting limes nightly with a light rinse of water for months now with out any problems. Thank you very much for taking one for the team on your test blades. : )
@CedricAda
5 жыл бұрын
happy to hear some of the stuff I say works well for other folks sometimes!
@tuono1500
6 жыл бұрын
Good test ... should certainly be awesome for storing knives ...
@BrutalJuice138
3 жыл бұрын
Why does that knife say Weatherford Texas? That’s where I live.
@BradGryphonn
6 жыл бұрын
I've been waiting for ages for a 'Will M4 Cut Citrus?' video.
@birdlaw1019
6 жыл бұрын
Very informative, these tests are great! I had never even heard of this stuff, but I picked up a bottle after seeing your reviews of the product. I've been using it on my rex-45 para 3 and my zdp-189 Dragonfly (office carry) as well as some other misc products (watch face and glasses) and it makes a big difference.
@christamu2
6 жыл бұрын
These new materials really allow you to choke up for detail work.
@wowguy3562
3 жыл бұрын
I heard about this review on another video, some guy cuts up oranges with m4 steel, I was no way! I ordered 2 bottles. Caring for knives is like caring for cast iron, treat them well and you have a tool for life. I won't be torturing my knives like this, but thanks for a great video
@tuono1500
6 жыл бұрын
It is Jim
@MikeUman
6 жыл бұрын
I wonder if you can get the same effect as a Tuf-Cloth if you spray down a microfiber cloth with this stuff and let it soak in? For those not familiar with Tuf-Cloth, it is a product made by Sentry Solutions. Basically, this EDCi works as a dry lubricant/cleaner/protectant, and, the Tuf-Cloth does the same, but, instead of spraying it on, it comes embedded in a microfiber cloth. To re-charge the cloth, you damp wet it with Mineral Spirits, and, it's good to go again. It is stored in a plastic zip lock pouch to keep the cloth moist.
@tacticalcenter8658
6 жыл бұрын
technically its toxic. once it dries its non toxic. if the coating peels or cracks off, its no longer food safe. tuff brand is a dry lube. edci works different.
@malleusmaleficarum7840
6 жыл бұрын
You should use the blue scotch brite sponges. The green ones leave coarse scratches but the blue ones do not scratch. Ruined a few of mine til I found out. Had to use polishing paste to fix them.
@CedricAda
6 жыл бұрын
Malleus Maleficarum yeah i did mention that about the green ones having alox in them, I think
@malleusmaleficarum7840
6 жыл бұрын
Cedric & Ada Gear and Outdoors You sure did but I don't know if you were aware about the blue ones. I was just giving you a heads up to save you some trouble in the future in case you didn't.
@kerryrwac
6 жыл бұрын
It's Jim Skelton and Jerry Moen and another guy whose name escapes me that own it now.
@JimSkeltonKnives
6 жыл бұрын
kerryrwac It’s me, Todd Begg and John Hill (owner of Lile Knives). Jerry has moved on back to focusing 100% on his platens and grinder attachments.
@JETBLACKPRIEST
6 жыл бұрын
I'm wondering how well the edci works on fixed blades with sheaths like leather/kydex/wood etc and how they fare after being repeatedly sheathed and unsheathed, cause I feel like most of the shit would get scratched off if the kydex on my condor kukri can scratch the actual finish
@macro820
5 жыл бұрын
I wonder how much just polishing the steel would help vs satin finish
@macro820
5 жыл бұрын
Also EDCI vs tufglide
@hooliganAvail
6 жыл бұрын
Best spyderco flipper?
@markanthonystringfellow3923
6 жыл бұрын
Great job Pete,i needed some vitamin C ;-)))
@thechugdude
6 жыл бұрын
I use Tuf Lite. It works alright I guess. 🤙I'd like to see a Winkler knife sometime. I've always wanted to know if they were worth the pricetag. Now that I think of it the Pricetag may be why I don't see many reviews. Lol
@Greg_Chock
6 жыл бұрын
I find it funny that you have some very expensive knives and sharpening systems but usually use WD-40. I expected you to be a nano oil advocate using different weight oils for different knives. 😉 For rust resistance on garden tools I've had good results using Evapo-Rust RB015 Rust Inhibitor (not the rust removal product). For lubricant I just use whatever gun oil I have on hand.
@CedricAda
6 жыл бұрын
ive got some edci to keep them rust free, but I still love the sheer degreasing power of wd40. Still need a good proper oil after the wd spray
@Greg_Chock
6 жыл бұрын
I recommend M-Pro7 Gun Oil LPX. Its pretty cheap, a good lubricant and also adds some rust resistance. For food prep knives I guess we're stuck with plain mineral oil or camellia oil.
@frederickj.7136
5 жыл бұрын
...And Ballistol (mineral oil based?), which I can say is helpful; and it's been around in use a long, long time.
@Damen0530
6 жыл бұрын
He is part owner of the company...
@oscarmedina1597
6 жыл бұрын
Boom! Sold! Take my money, please!
@travv88
6 жыл бұрын
Waste of mandarin tho.....
@CedricAda
6 жыл бұрын
its okay, I shoved them up my arse afterwards
@travv88
6 жыл бұрын
EDC food, tacticool.
@totschopper
6 жыл бұрын
Look what you did! , "you little jerk!"
@antimatter4733
6 жыл бұрын
I don't really get the point of this... Is it that difficult to wipe a knife down after you use it... If you're going to be using a knife in corrosive environments then you probably shouldn't get a carbon steel....
@tacticalcenter8658
6 жыл бұрын
i prefer using m4 and other super steel like it. while a cpm steel is great for edge retention its not great for toughness nor edge stability. m4 will role before it chips and sXXXv/n will chip before it bends. so you choose the steel to the task. its ALWAYS been known that if you use carbon steel you always wipe it down with oil when you get it or itll rust or patina. its no different this day an age, just less people know despite the internet.
@johnmadia5229
4 жыл бұрын
Google high carbon steel patina. It’s a bit more to do than just wipe off. The high carbon steel knives “patina” unlike stainless steel knives that you are used to
Пікірлер: 51