I really like this Edelkrone Slide. Time to get one.
@kazisaud
6 жыл бұрын
Nikolaus H. Rethink twice before you get it
@DEVUNK88
6 жыл бұрын
in very slow movements I can see jitters, fast motion masks jitters
@AaronNanto
6 жыл бұрын
DEVUNK88 also know that I don’t have any lens or camera body stabilization enabled here.
@DEVUNK88
6 жыл бұрын
well I know I see jitters in my slides when I hit a drag in the rail system on my cheap slider or small stretches in the belt or something, but I figured it might just be my pc or internet connection lagging a little bit
@hellohogo
6 жыл бұрын
Would you consider doing a tutorial on the app and its functions? It’s a little confusing to say the least😂
@DEVUNK88
6 жыл бұрын
any adjustment for the rate it switches between targets?
@AaronNanto
6 жыл бұрын
DEVUNK88 yep the app gives you a speed adjustment on how fast to switch between targets.
@DEVUNK88
6 жыл бұрын
awesome, unfortunately I've seen a lot of comments talking about non functioning units straight out of the box, I have a hard time believing that the majority of the units shipped had these problems, yours seems to work flawlessly, any insight on what the problems were? hardware related or software related? I'd be very aprehensive to buy on after seeing the negative reports, but If it works like your showing here this system is pretty amazing
@AaronNanto
6 жыл бұрын
I can’t speak to other peoples issues but at least with mine it worked but of course it had issues as I was an early adopter. I think only now that the FW and App are more mature that it is really getting to the point where it is what was advertised to be. I need t make another update video with the new FW/APP as it is a lot different now.
@betomena1
6 жыл бұрын
Where do you get the updates from? I can't find any info on updates on the Edelkrone website. Thanks.
@AaronNanto
6 жыл бұрын
betomena1 updates are in the app. FW updates are also pushed via the app.
@michaelbaker6844
6 жыл бұрын
So my company bought two full motion kits. Neither has worked correctly out of the box... We have done firmware updates, drive system replacements and all manner of testing. We have very similar problems to what Jarek Rosinski showed in his video. It is brain fracturingly painful to know what the system is capable of and yet in practice you can't even get it to repeat a single instruction. Given the huge advertising campaign they have been on and from what I've gathered large initial sales the issues with the system a fear could bring down the company. I don't know how Aaron got these results. Ive spent 30 hours and my Boss has spent more then that... one attempt out of 50 gets a usable results but can never be repeated. I have 100 suggestions on ways to improve the motion application having spent years working with kOS, Maya and aftereffects doing keyframe animation. but if they can't get reliable control of their servos no look and feel fix will make this more usable. As some one that has been working for over 5 years with the Cinedrive system (A larger more complex, heavier and more expensive) system I had high hopes for the motion kit. those hopes are now gone. unless something happens soon then so will the motion kit.
@kazisaud
6 жыл бұрын
Michael Baker, thanks! I just got the whole bundle this week & I am having the same issue...spent countless hours figuring this...very much disappointed
@AaronNanto
6 жыл бұрын
Sorry to hear about your issues. For me, I’ve not done anything special to get the results from the motion kit on any of my videos. With the latest FW update the unit is even better than before and has addressed almost all of my issues/bugs with the system (one remaining bug is that the pan/tilt head motor ratchets when changing direction). I also came from originally using the Cinedrive and while the Motion Kit initially was disappointing to me, it’s now very close to expectations.
@znelson32
5 жыл бұрын
Has your rig gotten better in the past year?
@kar-unboxed
6 жыл бұрын
Do you think the load capacity will support Cine cameras like a Red W or Canon C200?
@AaronNanto
6 жыл бұрын
The delux version I believe should be able to handle the C200, but I'd not recommend any RED camera as I found it to be too unstable.
@kar-unboxed
6 жыл бұрын
Aaron Nanto Thanks Aaron! I don’t see a “delux” version. Do you know if they changed the product name?
@AaronNanto
6 жыл бұрын
Hmm. I just looked and I don’t see the cinema camera version of it anymore (just the XL slider which is made for heavier cams). You may want to email them about the motion kit that’s compatible with heavy cams.
@kar-unboxed
6 жыл бұрын
Aaron Nanto ok Thanks!
@timelschner8451
7 жыл бұрын
Hey Aaron, I also have the motion kit. But also with the latest update from today I have major issues. What lens are u using, and do you also have feel a gap in the tilt motor when you move it with your hand up and down. Seems the gears have to much room
@AaronNanto
7 жыл бұрын
Hi Tim - I'm using the same DSLR/lens I've used for every Motion Kit video I've released - Samsung NX1+Sigma 18-35 f1/8 Art lens. I did encounter a few motion issues which I mentioned in the video. Have you watched Edelkrone's Motion Kit support video? I know you can tighten up those gears if you are seeing slack on your unit.
@michaelcabrera794
7 жыл бұрын
Hi Aaron, how long did it take for you to receive your Motion Kit order from Edelkrone? I placed my order on 7/25 and it's already 9/1 and I'm still waiting. Was curious how long your wait was.
@AaronNanto
7 жыл бұрын
Well, I had ordered mine right when it was announced so it was during pre-orders. They should be able to let you know when they will be able to ship your order if you contact them.
@reyesmontemayor6998
7 жыл бұрын
I really like the features this motion kit provides but I'm concerned about various problems others are having. for example this guy: kzitem.info/news/bejne/qWOFzpV9pWKLd44 Have you ever had these issues?
@pixmediachfilmproductions5841
7 жыл бұрын
Hi Aaron Thanks for your test. I have the feeling that after the upgrade to 1.6 the focus tracking is not as accurate. What is your experience? Best Wishes Josko
@AaronNanto
7 жыл бұрын
No issues on my end with focus tracking. I'm using the same DSLR & lens I've always have for this test (and previous tests) and I'm still using the same lens focus profile I created when I first got the Motion Kit as well. Have you tried re-calibrating your lens yet?
@timelschner8451
7 жыл бұрын
I have a GH5 with an inifinite focus ring, so I have no lock at the end of focus. So its pretty unclear to me how to setup the lens because it seems to me the software requires a lens with a end lock for the focus. Right?
@pixmediachfilmproductions5841
7 жыл бұрын
It does not matter whether infinite focus ring or not. It is important that the focus ring is linear. This is important for every follow-focus system.
@pixmediachfilmproductions5841
7 жыл бұрын
I have created a new lens profile with new calibrating. The focus tracking is correct again. Do not understand, because the camera and lens are exactly the same as in the first calibration.
@ErikOlsen
7 жыл бұрын
When calibrating a zoom lens, is this done in the widest, or closest focal length?
Пікірлер: 34