Actually, there are other sliders that travel twice the length of the slider as well. You mentioned the Edelkrone was unique in this respect. I have a ProAim Spark that does the same thing!!
@BartJohnsonProd
7 жыл бұрын
+Jason Rohrbach Good to know! Not sure if the ProAim Spark existed when I did this review, but thanks for the info!
@hellohogo
7 жыл бұрын
The proaim is a knockoff though.
@Blackfilmguild
7 жыл бұрын
I am having issues with mine holding the C300 mark II. When I mount it on the tripod it tends bend a little... maybe it is my tripod or something.
@BartJohnsonProd
7 жыл бұрын
I think the issue probably is the tripod. It is best to have very study tripod legs when using the slider. If you are using a bowl mount tripod, the bowl may be slipping slightly. Try a flat mount base and see if that helps.
@Blackfilmguild
7 жыл бұрын
Thanks for the reply, I just purchased the manfrotto 504HD set. It looks like this one will work. Which one are you using in the video?
@BartJohnsonProd
7 жыл бұрын
I am using a Manfrotto 502 head with a flat base on Induro Carbon Fiber legs. The legs d have a 100mm bowl mount, but it holds tighter than most I have seen.
@Blackfilmguild
7 жыл бұрын
I will let you know if the 504 set works! great video... thanks for the help!I was using the silk 700DX fyi.
@igraphyx
6 жыл бұрын
Very good review. Answered all my concerns.
@chosenideahandle
7 жыл бұрын
These things are more difficult to get smooth slides with than my old $75 slider from China, just because they neglected to include a drag control. It's a glaring error that they've recently fixed with the Steady Module (at least for now it's included when you buy a Slider Plus). Anyone that knows about this issue after buying, good luck getting a steady module anytime soon. Wait times are up to 10 weeks.
@BartJohnsonProd
7 жыл бұрын
I'll look into that Steady Module! Thanks for the info. Especially with lighter cameras I did find it required a steady hand.
@LAMBERTONES
3 жыл бұрын
Hey man! What tripod legs/half bowl would you recommend? We're trying to get our setup stable. Do you have a specific recommendation? Cheers
@BartJohnsonProd
3 жыл бұрын
I used to use Induro tripods and half bowls, but recently switched to Benro.
@Artalos1
6 жыл бұрын
really cool video - I didn´t know about this smart mechanism of this slider. I am looking since ages for a good slider. I think I found the right one, thx.
@BartJohnsonProd
6 жыл бұрын
No problem. Glad I could help!
@percepto777
8 жыл бұрын
Thanks for the great info. Have you any idea how long is the set-up time for this with the Action and Target modules? And how steep is the learning curve? I'm a hobbyist looking to improve the quality of my shots, but this is obviously a lot of money just for a hobby! Thanks again.
@BartJohnsonProd
8 жыл бұрын
+percepto777 I haven't tested the action or target module yet, so I cannot tell you how they perform. I will look into getting a hold of those accessories and doing a review for you.
@ideaukdesign
7 жыл бұрын
Do you get any shaking, or micro shaking/vibrating as you pan side to side with sliding? Ours doesn't feel that smooth when pushing and pulling. Great review by the way!
@BartJohnsonProd
7 жыл бұрын
IDEA Design & Marketing Ltd I don't seem to have those issues with mine. Which belt do you have installed? If you are using the rubber belt with teeth that is intended for use with the attachable motorized modules, that can cause issues while sliding. The cloth belt is much smoother for manual use. If that's not the issue, I would check to make sure everything is tightened and has the appropriate amount of drag on the fluid head. Hope this helps!
@popssummercamp
7 жыл бұрын
We have the fabric belt attached, it's a little smoother now we've used it a couple of times. To be honest the stuttering and 'jello' effect was only really obvious when using an Iphone 7 on the slider, not so obvious when we used a DSLR very strange!
@apfelmann01
7 жыл бұрын
simple stupid question: I had my video head mounted on the slider for months now and tried to remove it from the slider yesterday but I could´t figure out how to...please help. As you can figure out, I´m not filming every day...
@BartJohnsonProd
7 жыл бұрын
I'm assuming its a flat base tripod head that you screwed onto the slider carriage? Make sure to lock down the pan axis of your tripod head nice and tight and then unscrew the head from the slider. It may be on there pretty tight and just needs a little push to break loose.
@rrfilmproduction1084
8 жыл бұрын
Nice work. At 4:22..may I ask which head is the camera mounted on on top of the tripod? Thank you
@BartJohnsonProd
8 жыл бұрын
+RON RAY The head is a Manfrotto MVA502AH
@PlanetariumPictures
7 жыл бұрын
just opened mine up and it seems to hit a small tiny bump as im sliding it. if i go really slow it will shake a little at certain points of the slide. Do you have the same issue?
@BartJohnsonProd
7 жыл бұрын
+PlanetariumPictures Interesting. Mine does not have any bumps or shakes. Do you see any visible imperfections on the rails?
@PlanetariumPictures
7 жыл бұрын
Bart Johnson Productions no rails look clean/fine. The minor bumps happen when i go really slow
@chosenideahandle
7 жыл бұрын
Many people experience a bumping with lighter cameras. The tolerances are quite poor for such an expensive product.
@RayonWhittaker
6 жыл бұрын
Hey great info.... What/Which tripods would you recommend at this time? The one you linked up in a previous request is no longer available. What's your take on the Manfrotto tripod and video head [MT055XPRO3 + MVH502AH] combination? I'd appreciate any suggestions you have.
@BartJohnsonProd
6 жыл бұрын
+RecarroJames sorry that one is no longer available! I’m not sure what’s out there lately. I’ll take a look and see if I can’t find a decent suggestion.
@RayonWhittaker
6 жыл бұрын
Bart Johnson Productions thanks for the quick response. I'll be sure to keep a lookout for that response
@jeremyfoster8726
6 жыл бұрын
any suggestion yet?
@ErnieSesameStreet
9 жыл бұрын
may I ask what is the tripod shown at the video
@BartJohnsonProd
9 жыл бұрын
Jackie Tan It is the Induro Carbon 8X Video Tripod with a 100mm Bowl www.bhphotovideo.com/c/product/1026239-REG/induro_476_443_lfbc443s_carbn_8x_vid.html
@kamalji
7 жыл бұрын
Hi Mr Bart Johnson.. what u said and given above that Induro tripod link. i have been searched in internet. but i could't get exact model what u have given above. pls can give me more details about that Induro tripod model number full details ,i know my english is very poor ,pls try to understand
@awne732
8 жыл бұрын
very good review
@BartJohnsonProd
8 жыл бұрын
+Awn Rizvi Thank you!
7 жыл бұрын
I wonder: Would it work if you do a vertical slide?? Or diagonal??
@BartJohnsonProd
7 жыл бұрын
+GARDIENS la web série It can certainly work in those directions just like any other slider. The only thing is you will not get the doubled length of travel like you would on a tripod. It will only travel its physical length.
@monasorger3391
8 жыл бұрын
thanks so much for the review Bart - this was VERY helpful!! One questions: between this and a stabilizer, which would you prefer and why?
@BartJohnsonProd
8 жыл бұрын
+Mona Sorger That's a tough call. They are very different and serve different purposes. I own both this slider and a DJI Ronin gimbal stabilizer, and I use them both very often. The edelkrone slider is my go to for corporate work, because I can keep it on the tripod locked in place during interviews, but then can quickly unlock it and get some dynamic slides for b-roll. A stabilizer can be much larger and can take time to set up, but can give you some amazing cinematic shots that could not be achieved with a slider.
@monasorger3391
8 жыл бұрын
+Bart Johnson Productions thanks SO much for the response Bart - I think I will try and get both!! haha
@BartJohnsonProd
8 жыл бұрын
+Mona Sorger They can be quite expensive, so go for whichever one will work better for the type of shooting you currently do. Then maybe down the road you can pick up the other when you are ready to expand your camera movement options more.
@monasorger3391
8 жыл бұрын
+Bart Johnson Productions yup absolutely - that's the plan :)
@blackmennewstyle
8 жыл бұрын
That's a wonderful piece of kit
@federico792
6 жыл бұрын
hey man can u help me? the top screw isnt working anymore, not staying up anymore, have u seen this problem? any way i can fix it?, I dont live in the US
@BartJohnsonProd
6 жыл бұрын
I haven’t seen that problem before, but my guess is there is a small spring in there that has come out of place. Sorry to hear that! Best bet is to try contacting edelkrone.
@JoePacheco
7 жыл бұрын
great review.
@samlamberts2036
7 жыл бұрын
Hi Bart, do you think 75mm is enough? I was looking at manfrotto 545B+502 with 75mm bowl
@BartJohnsonProd
7 жыл бұрын
I am honestly not sure. 100mm has more surface area and therefor more friction when tightened down. 75mm might slip, but I cannot be sure.
@samlamberts2036
7 жыл бұрын
Purchased this combo with an 100mm bowl adapter, maybe it helps a bit, will see.
@renzventura9123
7 жыл бұрын
can you mount a manfrotto fluid head on your induro tripod? i'm a bit interested on your tripod legs
@BartJohnsonProd
7 жыл бұрын
Definitely. You can mount anything with a 3/8 inch flat base.
@Spinova1
8 жыл бұрын
Great video, thanks for sharing it. May I know which canon was that on 2:40min.?
@BartJohnsonProd
8 жыл бұрын
+Spinova1 That was my 5D Mark III
@roschkovofficial
9 жыл бұрын
good information, thank you!
@vitosmediaproductions4143
8 жыл бұрын
I just bought one but my manfrotto that i bought won't let me remove the head from the base :/ what should I do now?
@vitosmediaproductions4143
8 жыл бұрын
+Nori Vito its the MVH500A
@BartJohnsonProd
8 жыл бұрын
+Nori Vito Unfortunately you will need a flat base tripod head that is removable. This is the only way to add a fluid head on top of the slider.
@vitosmediaproductions4143
8 жыл бұрын
I have the edelkrone slider plus ... So your suggesting a flat base tripod along with buying another fluid head ? so it would be tripod,slider,videohead, camera?
@IkeyTV
7 жыл бұрын
What sticks are those that you have the tripod mounted to?
@BartJohnsonProd
7 жыл бұрын
They are the Induro Carbon Fiber legs.
@turanturan3954
6 жыл бұрын
Nice
@piast_kolodziej
7 жыл бұрын
Hi! Which tripod do you use on your video?
@BartJohnsonProd
7 жыл бұрын
+mikolaj64 That was a Manfrotto 502 head on Induro Carbon Fiber legs.
@piast_kolodziej
7 жыл бұрын
Thanks Bart!
@Sarthaknehavikas
4 жыл бұрын
If you saw ad of XdroneHD, it’s fake ad... don’t buy They take images of Mavic mini and sell fake mavic. Not sure how to report this ad
@BartJohnsonProd
4 жыл бұрын
Thanks for bringing this to my attention. Different ads appear for different people, but I don't like having fake ads appearing on my videos! I will see if I can report it as well.
@thekingrobert
7 жыл бұрын
Coooooooooooooooooool-ey
@kamalji
7 жыл бұрын
Hi Bart Johnson i have been searched in the market what u have mentioned Induro Tripod model Induro Carbon 8X Video Tripod Kit (100mm Bowl) is not available, but they mentioned different model like this "www.bhphotovideo.com/c/product/1158036-REG/induro_git404l_4_grand_stealth.html " instead of what u have mentioned model. this's suitable for slider. please let me know
@BartJohnsonProd
7 жыл бұрын
They may have discontinued the model that I have. That newer version looks like it should work, but I cannot tell if you are able to level the platform without adjusting the legs. It doesn't appear to be a bowl mount. Bowl mounting helps to level everything quickly.
@kamalji
7 жыл бұрын
Thank you for ur reply. yes your r correct. " Bowl mounting helps to level everything quickly is right. i am using Canon 1Dx Mark II camera with 85mm Zeiss lenses . and mounting on slider. but i could't get a perfect tripod for that, please can u give me any suggestion which tripod is better ??
@Spencer635
9 жыл бұрын
You look like you've got the same sticks as I do.
@BartJohnsonProd
9 жыл бұрын
Spencer Moret I have it on the Induro 100mm Carbon Fiber sticks in this video. Great set of sticks!
@Spencer635
9 жыл бұрын
Maybe I was wrong lol, they look like my manfrotto 535aq. I actually returned an induro set since it broke and got the manfrottos but good luck with yours ha
@BartJohnsonProd
9 жыл бұрын
Spencer Moret Nope. Induro Carbon 8X Video Tripod. I have had great success with my Induro gear so far. Love their Hi-hat.
@Spencer635
9 жыл бұрын
Could've been the one I had was a bust but id love to find a smaller lighter weight tripod. I use the manfrotto with a benro s8 head for my gh4 and its a lot to lug around.
@Spencer635
9 жыл бұрын
And they're hi hat looks great especially at the price they sell it for. Do you shoot video for a living? If you don't mind me asking
@digitalcrack5055
8 жыл бұрын
Even in your sample shots you can see the slider is catching and not sliding properly. Its as if it has slight hesitations when sliding. This is why I always watch review videos and judge for myself. This seem to be another crap product that doesn't even do the 1 job its suppose to. I always watched other cons about this product.
Пікірлер: 87