This is one of the quickest, most thorough videos I have ever watched. Well done!
@TrainingHandsAcademy
10 ай бұрын
Much appreciated! If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
@Vicflash
Жыл бұрын
You do a really good job editing to be concise and precise. I hope you’re successful enough to keep them coming. Thanks
@TrainingHandsAcademy
Жыл бұрын
Much appreciated! If you want to support my work, please drop some more comments on my other videos! This helps to wake up the YT algorithms. :)
@baalbuster9294
8 ай бұрын
Excellent tutorial brother. Learned a lot. These instructional videos really nail down (no pun intended 😀) the basics are give the user greater confidence. Really appreciate these videos .
@TrainingHandsAcademy
8 ай бұрын
I'm so glad they are helpful for you! If you want to continue to support my work, please drop some more comments on my other videos. This helps to wake up the YT algorithms. :)
@FreekHoekstra
4 жыл бұрын
Clear, concise and showing some ways to fail and how to recover, great stuff!
@TrainingHandsAcademy
4 жыл бұрын
Glad it was helpful!
@opmeghwal4382
3 жыл бұрын
V
@californiadaze
3 жыл бұрын
All these videos are great - thanks for sharing your knowledge with the world. People like you make this site incredible!
@TrainingHandsAcademy
3 жыл бұрын
Glad you like them!
@DMR6262
4 жыл бұрын
I just got into woodworking and only use plywood since I don’t know what I’m doing and don’t want to waste money on “good wood”. I’ve seen other videos where people use edge banding but no one ever explains anything about it. This video is awesome! Now I know what to buy and exactly how to use it! Thanks so much for sharing your expertise. You have a new subscriber!
@TrainingHandsAcademy
4 жыл бұрын
Awesome! Welcome aboard D. M. R.
@syedsayeedurrahmanzaini4221
2 жыл бұрын
Thanks a lot for demonstrating the process in detail. Best regards
@TrainingHandsAcademy
2 жыл бұрын
Glad you found it helpful.
@zskalca
2 жыл бұрын
Thank you for your great vid tutorials. I like them so much.
@TrainingHandsAcademy
2 жыл бұрын
You're very welcome! Thank you for the gift! 🙏
@pennstater89ad
2 жыл бұрын
Thanks for sharing, this video was very helpful!
@kendunbeck6260
4 жыл бұрын
I just finished building a home bar and this update popping into my email was exactly what I needed to know to finish it. Thank you!
@TrainingHandsAcademy
4 жыл бұрын
Great timing! Have fun finishing your project Mr Dunbeck!
@briannewton3535
2 жыл бұрын
This is absolutely all I needed to make a purchase to get my project done. thanks for this informative video.
@josephking6515
Жыл бұрын
*Thank You!* I could not figure out how to properly use the double sided trimming tool (the end trimmer was just so simple to use by comparison). Now I have a place to start and I appreciate your video and instructions very much. Thank you again. 👍👍
@TrainingHandsAcademy
Жыл бұрын
Glad I could help!
@vicentenobre1
4 жыл бұрын
Another great video. Straight to the point, informative and professional. Best wishes from Brazil.
@TrainingHandsAcademy
4 жыл бұрын
Thanks Vicente!
@proulx1q
4 жыл бұрын
Solid video as always!
@timwilson2599
9 ай бұрын
I've just got the double sided cutter from Temu (£6.27) but as usual it didn't come with any instructions so this video was very useful. Thanks very much
@TrainingHandsAcademy
9 ай бұрын
Glad I could help
@paulgrabowski
2 жыл бұрын
Great video! Keep them coming
@1971carpetmaster1
3 жыл бұрын
Thank you. You explain it so well..
@randyavenido4190
4 жыл бұрын
Massive thanks for making this video sir! It help us a lot. Keep safe always!.....
@xpurgeeditz
Жыл бұрын
Brilliant explained
@TrainingHandsAcademy
Жыл бұрын
Glad you liked it.
@adammonteza1762
2 жыл бұрын
Great video: informative and to the point!!
@kauerpc
4 жыл бұрын
Nice and informative as always!
@TrainingHandsAcademy
4 жыл бұрын
Thanks buddy!
@pg5604
3 жыл бұрын
Well presented!!
@TrainingHandsAcademy
3 жыл бұрын
Thank you!
@johnmanfra4224
3 жыл бұрын
Hey man thanks so much for explaining this.. I’m building a computer desk and I have just finally built my first round edge jig.. took a few try’s.. next I want to edge ban everything and then I should be good. Was confused with this stuff but thanks.
@shamsularfeen1676
3 жыл бұрын
Awesome tips...loved it❤
@RunningCordoroy
3 жыл бұрын
awesome video
@jnc5255
3 жыл бұрын
Wow..that how they do it...yeah...thank u sir
@rupakmedhi4252
4 жыл бұрын
Hi..l like ur presentation...it was very simple to understand..u made it sound so easy...l would like to ask u few questions ...other than the aesthetics ...why do we need to edge band? Does it make the plywood last longer ? Does it prevent water entering the plywood core ? Is it necessary to edge band the sides that we don't see? Please do enlighten me. Thanks in advance.
@TrainingHandsAcademy
4 жыл бұрын
Edge banding is used both to protect and finish off the edge of the raw plywood. I wouldn't say it makes the plywood last long, but does prevent contaminants like water/moisture from entering. In general I do not finish the edges that are not visible. Bottom line, it's done mostly for aesthetic. Hope that helps.
@tdauthantic
2 жыл бұрын
perfect video demo👍🙏
@TrainingHandsAcademy
2 жыл бұрын
Thanks for the visit
@ahagrasy
3 жыл бұрын
Thank you 👍
@CatoELYounger
3 жыл бұрын
Great video! Thanks!
@rtm1043
2 жыл бұрын
You could use a router bit flush cut. But better is a regular file to take care of the overhand and bevel.
@keithwoodcrest
4 жыл бұрын
This is one of the best videos on this process, for sure. New to this and already installed some on the particle board I’m working with and although I like it the job could’ve been better. This explained everything I goofed on and is definitely gonna help me out a lot. Thanks!
@TrainingHandsAcademy
4 жыл бұрын
Glad it was helpful!
@ravindradaundkar4899
4 жыл бұрын
I have the squeezee type of trimmer, but never knew it has bevel adjustments. Thanks.
@JamesHaycroft-g2t
9 ай бұрын
Hi, does the banding have to colour match the wood if I’m planning on staining it all? Thanks
@Maddy.MS86
2 жыл бұрын
Thank you, so much. ❤ 🇮🇳
@TrainingHandsAcademy
2 жыл бұрын
My pleasure!
@MGJDMNJ
4 жыл бұрын
Great as always
@TrainingHandsAcademy
4 жыл бұрын
Thanks buddy! Send more pictures my way if you want... I really enjoyed seeing what you did and the tools you used!
@MGJDMNJ
4 жыл бұрын
Thank you sir! Just made a 3” mdf work bench. Unfortunately I only have a hodge podge which includes a 6” pony vise which I have to figure out how to attach so I can plan some dog holes. It should be....interesting lol
@TrainingHandsAcademy
4 жыл бұрын
Very cool man!! Exciting!
@DP-tb5qn
4 жыл бұрын
very good video,well done
@TrainingHandsAcademy
4 жыл бұрын
Thank you! Cheers!
@MBDillan21
4 жыл бұрын
Fantastic Thank you so much
@charlesjacksoniii8787
4 жыл бұрын
So cool!
@sonofsandwiches6892
Жыл бұрын
Found the spring trimmer would not cut. I ended up using a sharp chisel instead. Filing is another good option.
@rajinderrihal2424
3 жыл бұрын
very nice
@David.M.
4 жыл бұрын
I never tried glue on edge banding. I have glued solid wood to plywood to hide the edge. Thanks for the video.
@spkendrick
2 жыл бұрын
I haven’t had good luck with the dual sided edge trimmer. 😩
@kennethrose4375
2 жыл бұрын
Josh. Do you have any experience with this edge banding on particle board edges?
@TrainingHandsAcademy
2 жыл бұрын
I've used it on melamine plywood which has a particle board core. I don't think it would work good on just regular particle board.
@kennethrose4375
2 жыл бұрын
@@TrainingHandsAcademy Tks!
@therandomcarpenter6810
3 жыл бұрын
Who is must required in wodworking, bosch GSR or bosch GSB?
@cdubz2970
4 жыл бұрын
Do you do decks or pergolas? Would like to see a video on that.
@TrainingHandsAcademy
4 жыл бұрын
At some point I will... thanks for asking.
@ricisgaul
2 жыл бұрын
Thanks for the video! Really easy to understand. 👍 one question, does the dual edge trimmer work on 2mm edge banding? Some of my projects require 1 and 2mm. just need to know if it works for both thickness.
@TrainingHandsAcademy
2 жыл бұрын
I've never cut 2mm banding with mine. However, I just measured the cutter and it looks like it can handle 2mm (that is really close to the max). Just double check before you buy the trimmer of your choice
@codacreator6162
4 жыл бұрын
Awesome video! Tips here that I will definitely use (sides first) as I'm building a desk topped with 3/4" Birch plywood. I knew enough to buy the banding, but was a bit unsure about the best application. Question: if I bevel the edge by 15 degrees to match the legs, will edge banding be more difficult to apply?
@TrainingHandsAcademy
4 жыл бұрын
Application no, trimming maybe a little. I would try it on a scrap piece before doing it on the real thing. Let me know how it goes.
@tomcat690
4 жыл бұрын
Nice demonstration. One question. How do you trim the banding when you are working on plywood that is already installed. I have cabinets I am redoing and the fronts of the shelves need banding. I can't start at an edge because there are vertical pieces of wood in the way.
@TrainingHandsAcademy
4 жыл бұрын
Great question! I use a straight blade (or utility blade) and hold it flush with the top or bottom of the shelf to cut the excess material off closest to where the shelf intersects the side of the cabinet. I cut just enough material off to get my trimmer in there to finish trimming the remaining material. After that I use some fine sandpaper to polish the edges. Hope that make sense, if not hit me up on IG where we can chat and share pictures.
@tomcat690
4 жыл бұрын
@@TrainingHandsAcademy Thanks for the reply. I'll give it a try.
@fireworxz
4 жыл бұрын
Thanks.. Can we stain/varnish/lacquer on the edge band after "installing" it?
@TrainingHandsAcademy
4 жыл бұрын
Absolutely!
@Blue60
4 жыл бұрын
Great video cheers
@TrainingHandsAcademy
4 жыл бұрын
Thanks 👍
@katelynmayfield4559
2 жыл бұрын
For the blue edge banding trimmer, can you adjust the width?
@TrainingHandsAcademy
2 жыл бұрын
Yes
@utubz007
3 жыл бұрын
Hi - I have a question. Di you say that its best to veneer the side of the board first and then apply the veneer edge so there is no gaps in the seams at the edge?
@TrainingHandsAcademy
3 жыл бұрын
Yes, sides first, and then the face (the side you will see most).
@tonydeleo3642
2 жыл бұрын
When building drawers out of plywood, how do you do the 90 degree corners (looking down at the top of the drawer? Thanks
@TrainingHandsAcademy
2 жыл бұрын
I do the front and the back first, and then the sides.They end up looking like a stile and rail door, if that makes sense?
@tonydeleo3642
2 жыл бұрын
@@TrainingHandsAcademy Thank you for the response, good idea!
@davispaul82
3 жыл бұрын
what if you're working on a project to to wide to use the double sided trimmer, what do you use then since the single edge trimmer doesn't come out as clean?
@TrainingHandsAcademy
3 жыл бұрын
Hey Paul. I would use a single sided trimmer (or take the double sided one apart and use half of it) and then use a little sandpaper to clean it up.
@lorenbooker9486
3 жыл бұрын
What should I do if I’m edge banding a piece with rounded corners to avoid a seam showing?
@sheefumaster
3 жыл бұрын
Can that blue trimmer cut 2 inch band?
@riciniguez6206
Жыл бұрын
Can you edge band on corners that are round?
@TrainingHandsAcademy
Жыл бұрын
Yes
@ishmaelabrahamarmah
3 жыл бұрын
Please how can get one of the edge trimmers? I am in Ghana
@muratkh
3 жыл бұрын
Can i still paint over it? Like lets say white
@TrainingHandsAcademy
3 жыл бұрын
Yes
@David_K_pi
3 жыл бұрын
My issue with the purpose-made edge banding irons is that they are stupidly expensive. It's just a heating element with a handle. Why so pricey? You can buy a brand new clothing iron for as little as 1/4 the price - Amazon has one for 14 bucks, for instance. I was fortunate in that I already own a heat gun for electronics. That worked fine. I just worked in 6 or 7 inch sections and followed up immediately with a roller. My project was a little different from yours. It was a 28-inch square base for a turntable. I radiused the corners, so I didn't have a sharp corner to start from. I just started in the middle of the back edge and went clear around the entire panel. Used nearly 10 feet of birch edge banding. When I got back to the starting point, before heating the ends, I overlapped them and trimmed both ends at the same time with a mallet thump on my 1-inch chisel. A little TimberMate filled the tiny gap. I'm really happy with how it came out, especially since I'm a newbie woodworker. I guess since I was looking for an edge banding iron via Google, they added this video to my recommendations. A day late unfortunately. But I still enjoyed it. Thanks for all your informative content.
@codacreator6162
4 жыл бұрын
A bunch of other KZitemrs recommend using just razor blades, foregoing trimmer tools altogether.
@TrainingHandsAcademy
4 жыл бұрын
You can... but it can be hard to keep a nice uniform clean cut. Give it a go and see how you like it.
@simplehomelab
3 жыл бұрын
Hmm looks like the said trimmer is unavailable. Any other suggestions. Very nice video btw. No BS just information.
@TrainingHandsAcademy
3 жыл бұрын
amzn.to/2X35jpO
@dang3178
3 жыл бұрын
Can I use the blue edge trimmer for a 1/2 inch wood
@TrainingHandsAcademy
3 жыл бұрын
Not sure... I'd double check with the manufacturer. My guess though would be yes.
@trail4844
3 жыл бұрын
Do they have one for laminate?!
@TrainingHandsAcademy
3 жыл бұрын
What type of laminate are you referring to Payden?
@ebrahim613
3 жыл бұрын
Fine grit sandpaper means howmuch grit?
@TrainingHandsAcademy
3 жыл бұрын
220 and above
@ebrahim613
3 жыл бұрын
@@TrainingHandsAcademy okay brother. Thank you so much for replying.
@thercrv8202
Жыл бұрын
I watched hoping to find out what temp to set the iron to. I was disappointed. Much other good info.
@TrainingHandsAcademy
Жыл бұрын
I put my on high... never had a problem with burning. Hope that helps.
@sonuali7876
3 жыл бұрын
सर हैंड टाइमर मशीन चाहिए आप अपना नंबर भेज दीजिए प्राइस कितना होगा सर
@stevenferro
Жыл бұрын
Dude stop yelling
@OZheathen
10 ай бұрын
Hi I have issues with order of operations with my wood working projects Do you do this after you have sanded the main face or after ? Thank you
@TrainingHandsAcademy
10 ай бұрын
Great question! I would do this after you have done your main sanding. You will then want to follow up after you have edged it with a fine 220 grit to clean everthing up.
@JamesHaycroft-g2t
9 ай бұрын
Hi, does the banding have to colour match the wood if I’m planning on staining it all? Thanks
@TrainingHandsAcademy
9 ай бұрын
Yes you can get different species of wood
@JamesHaycroft-g2t
9 ай бұрын
@@TrainingHandsAcademy thanks for the reply. I’ve been finding it hard to match the banding to the colour of the plywood.
@TrainingHandsAcademy
9 ай бұрын
Do you have a local woodworking store? @@JamesHaycroft-g2t
Пікірлер: 125