I am having to wait on the externalaccessmod since i fly most of my models with r9
@mikebollinger2835
2 жыл бұрын
Hey I tried using the wizard to make a plane and I get error then have to shut transmitter off then back on to get out of wizard. Any idea why I can't do that?? Thanks I am still learning this radio love it so far have not flew a plane with it yet. Oh why I got u 😂 how come only get strength of 100 out of antenna but if put a modular in back get 250? Appreciate anything you can give tell me bout that, I Kno I am not only one interested in this, I have afew at club asking me that. 😆 Told them I,d ask u! Thanks again!
@maciejmotylinsky
Жыл бұрын
What about CRFS module? I it possible to bind few models and just switch?
@chestergt7765
Жыл бұрын
What would cause the models from not saving? The only models that have stayed saved are the models I had before updating edgetx to the new models
@Zbair99
2 жыл бұрын
Great features, and already very user friendly! Can’t wait to get this on my radio! Nice job John.
@RCVideoReviews
2 жыл бұрын
Thanks Bill. It'll be a nice update when it's released.
@nickrich710
Жыл бұрын
Do you have a video showing how to set up a fpv in Edge TX for the first time
@hspeed3656
2 жыл бұрын
Great review John, Awesome stuff Edge Team. Thanks for all your hard work.
@kkuenzel56
2 жыл бұрын
Great video as always! Would you happen to know if it's possible to upgrade an early Jumper T16 to a touchscreen?
@RCVideoReviews
2 жыл бұрын
Sorry, I don't know if upgrade is possible. Seems like it should be...
@flyhigh1491
Жыл бұрын
My radio TX16S is vibrating when I'm in the middle in throttle stick.. How to disable this? Please help 🙂 (EdgeTX)
@RCVideoReviews
Жыл бұрын
Model Setup -> Preflight Checks -> Center Beep -> T. Turn that off.
@abombazzafpv
Жыл бұрын
why after updating the tx16s to version 2.8 does the touch not work as before? it seems as if it is enchanted, if I move the sticks it works immediately, as soon as I try again it doesn't work, while in version 2.7.1 it worked perfectly
@RCVideoReviews
Жыл бұрын
I haven't heard this before. If you can repeat the issue, you really should open a ticket on the EdgeTX github.
@malte9999
2 жыл бұрын
You can just touch any model and get the same menu as when you use the rotary. So to create a new model, press on an existing model and select "Create Model".
@RCVideoReviews
2 жыл бұрын
Yeah--brain freeze live. I knew that :)
@bjenn65
Жыл бұрын
hi you are the best internet edge tx video man I have been using open tx on my radiomaster 16s for a long time buy now have a radiomaster 16s with edge 2.8 have set up a model the same as on open tx and the chanell monitor screen works ok and my radiomaster 168 reciever binds but I have no outputs to the servo can you help cheers Brian
@RCVideoReviews
Жыл бұрын
If you are 100% sure you have a bind, and you 100% have movement in your monitor on OUTPUTS (not just mixer), the only two other possibilities I can think of are the servo wire is flipped or the servos are bad.
@davidpaker626
2 жыл бұрын
Hello John very nice tutorial videos on these radios they will be very helpful for me when I find the on off switch 🤣
@RCVideoReviews
2 жыл бұрын
You need to sit down with some time, a beer, and a KZitem screen--Watch the videos. It'll come together.
@davidpaker626
2 жыл бұрын
😏🍺🍕👍😁
@johanopperman8039
2 жыл бұрын
Thanks John. I'm looking forward to the new update. It looks awesome
@RCVideoReviews
2 жыл бұрын
They've adjusted the release schedule to reflect the reality of this update. It'll be a little longer but I'm sure it will be completely worth the wait.
@johanopperman8039
2 жыл бұрын
@@RCVideoReviews I totally agree. 👍🏻
@witneydiggersrc3251
Жыл бұрын
Really great, 👍👍
@RCVideoReviews
Жыл бұрын
Many thanks
@witneydiggersrc3251
Жыл бұрын
Following another great video of yours today to update edgetx, unfortunately during the process of downloading from GitHub, a message appeared ‘restricted access only’ not sure why or if you have to be a member or associated with GitHub? But it certainly presents a problem, sadly. Be great know what to do next🤔 Quick note, All sorted in the end, I think it was me downloading too much at a time perhaps. However, just to say your videos are really great thanks
@torgeirbrink7227
2 жыл бұрын
Takk!
@RCVideoReviews
2 жыл бұрын
Du er hjertelig velkommen. Takk for at du traff tipset.
@keithdriggers9578
Жыл бұрын
i inadvertently turned the touch screen off on tx16s mkii how do i turn it back on,please
@RCVideoReviews
Жыл бұрын
How did you turn it off? You can setup a Global Function or Special Function to turn touch on/off, but without one of those setup already, I'm not aware of any other mechanism to turn touch off. So how did you do it?
@keithdriggers9578
Жыл бұрын
I'm not sure, but the touch part wouldn't work, I turned it off and back on and it worked fine. Don't know what I did. Thanks for the reply JOHN.
@normantrowell3767
2 жыл бұрын
I see that latest firmware is now including this. Shown as firmware main. Is this now safe to use ?
@RCVideoReviews
2 жыл бұрын
The main branch is the development branch. When the final is released it will be forked as a release version 2.8.0. So the answer is no, do not use the main branch version for production radios unless you are experimenting/helping with development/acting as a troubleshooter. Wait until you see EdgeTX "Flying Dutchman" v2.8.0 unless you want to take the risk of using a pre-release.
@normantrowell3767
2 жыл бұрын
@@RCVideoReviews Thanks for your prompt reply. I just wondered as I saw it as Firmware main and thought it was only nightly firmware that I should not use. I will wait
@normantrowell3767
2 жыл бұрын
Calibration button not working. ??
@jimhilgeford6258
2 жыл бұрын
Great Video. I am excited about Edge TX 2.8.0. Have you any idea when it will be released? Thanks in advance
@RCVideoReviews
2 жыл бұрын
Planned for September.
@amitm5517
2 жыл бұрын
Hi I am a big fan of yours. Thank you for making this series of videos on EdgeTx like you made on opentx...👌👍. May I get your mail id?
@RCVideoReviews
2 жыл бұрын
john at rcvideoreviews dot [com]
@rogerkircher
2 жыл бұрын
I'm looking for a video showing how to install amber sounds in EDGE TX. Yep, I'm old and a noob at the same time.
@rydfree
Жыл бұрын
You can simply download the sound pack and place those files into the Sounds folder of the SD card. I have sound files from several different sound packs in mine and deleted the ones that I would never use to keep from having to scroll through them all .
@jlarson42
2 жыл бұрын
Well done demonstration. Looking forward to the official release. Very happy with edgetx on my Tx16s.
@RCVideoReviews
2 жыл бұрын
Thanks John. I think it's a very nice refresh of the UI and it certainly lends itself well to touch.
@h2o40fpv
2 жыл бұрын
Very nice thank u
@RCVideoReviews
2 жыл бұрын
Welcome 😊
@jozuavanlangenhove6586
2 жыл бұрын
How good is the TX16 compared to other branded high quality radio's?
@RCVideoReviews
2 жыл бұрын
Hard to answer that without using other branded high quality radios. What I can say is I use my TX16s for everything I fly. Some models are cheap, some not so cheap.
@williamcox3852
2 жыл бұрын
They are really making this touchscreen pop. Nice video John. Lots of nice new features.
@RCVideoReviews
2 жыл бұрын
Yes they are. They're letting us take advantage of the hardware with these updates which is just awesome.
@MrZeek101
2 жыл бұрын
Tell me why you would want any other radio The Edge team is just killing it great job on the review of it and I'm so looking forward to the XR-61 take care
@RCVideoReviews
2 жыл бұрын
I agree--EdgeTX is a breath of fresh air on this hardware. So glad this group took up the charge.
@normantrowell3767
2 жыл бұрын
found it there are two
@RCVideoReviews
2 жыл бұрын
Ok--good.
@donaldheon
2 жыл бұрын
Can you point me to your video that shows us the proper way (dev recommended) to flash the radio from the sd card. Cant find that video on your channel.
@RCVideoReviews
2 жыл бұрын
Lots of how to flash videos in this playlist kzitem.info/news/bejne/rX-q33Whg56Ul4o kzitem.info/news/bejne/rX-q33Whg56Ul4o kzitem.info/news/bejne/xIiCvJ-qp4JlYKA kzitem.info/news/bejne/km6BsX6ujmSGe2U kzitem.info/news/bejne/q6Kh4KFri3ljf2k kzitem.info/news/bejne/sZ6mqppjo5FkkoY kzitem.info/news/bejne/u4Jm3oWIaaVorI4
@syros218
2 жыл бұрын
Bardzo fajny układ graficzny, programiści robią świetną robotę.
@RCVideoReviews
2 жыл бұрын
Zgoda
@Dashone93
2 жыл бұрын
What about specktrum reciver for beginner modes
@RCVideoReviews
2 жыл бұрын
I don't understand what you're asking.
@br0mbazz
2 жыл бұрын
Looks so good!
@RCVideoReviews
2 жыл бұрын
It is!
@dere013
2 жыл бұрын
Everytime I see your channel name I'm wondering. Are you doing A: Reviews of RC Videos or B: Video Reviews of RC (stuff) Thanks for all the videos. I watched several of them and they were all good.
@RCVideoReviews
2 жыл бұрын
Thanks for watching. :)
@dere013
2 жыл бұрын
@@RCVideoReviews Would you mind answer my question (A or B or both)?
@samavella8831
2 жыл бұрын
Great video. Excited to get my hands on when it’s eventually released. I did noticed that in the special functions when you selected a track, it did not give you a preview of the track sound. It would be nice to hear the track when you are setting it without having to get out of the special track mode!
@RCVideoReviews
2 жыл бұрын
Github has a feature request option. You should let the developers know. They count on community feedback for ideas.
@PkwyDrive13
2 жыл бұрын
Why would one turn extended limits on for quads?? When I got into the tx16s and quads a lot of tutorials told us to just turn on extended limits, so I did... But I never really knew why. Or if I need it on
@RCVideoReviews
2 жыл бұрын
Extended limits is to enable more mechanical throw on a servo for some reason. It generally shouldn't be used. I also believe DSMx has a built-in limit of 80% pulsewidth and extended limits allows you to overcome that limit and gain access to the full mechanical limits of the servo when using that protocol--but I'm not completely sure of this. At 100%, the range is only 1100 to 1900 vs 1000 to 2000 @ 125%. From the MPM DSM Page: A range of -100% to 100% will give an output range of 1100µs to 1900µs A range of -125% to 125% will give an output range of 1000µs to 2000µs
@RCVideoReviews
2 жыл бұрын
No worries. Easy to cross wires sometimes :)
@luispru945
2 жыл бұрын
Do you have a set up video for the OMP Bighorn
@RCVideoReviews
2 жыл бұрын
No. I have a few flight videos, but no setup videos.
@paolo9535
2 жыл бұрын
one more super video, i hope official release will come soon
@RCVideoReviews
2 жыл бұрын
Targeted for end of September. It's a few months away yet.
@HeliZero
2 жыл бұрын
It already looks soo good. I noticed that there's not any big changes on the model-select screen. I wish for folders with user-selected names. And "copy trims/sticks to" is so freaking cool.
@RCVideoReviews
2 жыл бұрын
You know you can create categories and name them what you want right?
@HeliZero
2 жыл бұрын
@@RCVideoReviews Yes - i have made 4 categories. But i'm not so fond of small plane-icon on the top - i just feel the need for a little graphical change on this. Not a big deal and the rest of the functionality works very well. Thanks for all your videos. This weekend i'm adding 2 extra toggle-switches on my TX16S Max. ;o)
@jerryzito6840
2 жыл бұрын
Really love these new updates. I would love to use them. What makes it so dangerous to fly with? I do understand that it's in the development stages.
@RCVideoReviews
2 жыл бұрын
I've had a handful of EM's and some issues with USB. It's just generally not appropriate to fly with firmware in this stage of development. You take your model in your own hands if you do.
@jerryzito6840
2 жыл бұрын
@@RCVideoReviews Understood. Thanks
@warren3174
Жыл бұрын
Wonder why they’re selling radios with edge already installed if it’s not ready to fly. Has things changed in the last 9 months ?
Пікірлер: 84