Getting ready to install Erls Module on TX16. I needed this, thank you,
@MessingWithCode
3 ай бұрын
Thanks so much for all your help
@jerryzito6840
7 ай бұрын
Thanks Bill. I fixed my storage warning problem. But now, my tx16s does not save a model I just setup.
@the-happy-RC-flyer
7 ай бұрын
Hi Jerry, I have never come across this problem until now. Please try a smaller SDCard maximum 32gb.
@jerryzito6840
7 ай бұрын
I have 64GB. Too large? @@the-happy-RC-flyer
@the-happy-RC-flyer
7 ай бұрын
16gb would be fine but I have used a 32gb card. See if you can borrow one from a friend to test.
@kimberlyhammond9947
Жыл бұрын
Bill, I have Edge TX 2.7.0 on my RadioMaster TX 16S radio and backed it up before the guys at RadioMaster reinstalled Edge TX 2.7.0. I would like to "retrieve" models from my backed up files (on my MacBook Pro). How do I do this operation? Thanks, David
@the-happy-RC-flyer
Жыл бұрын
Hi David, because the back up was from a radio of the same type you only need to open the back up in Companion and click restore to your TX16s connected to your computer. This will overwrite all of the settings and models currently on the radio.
@Warlock485
3 ай бұрын
Lost all my models on edge tx companion has them and i hit write to controler and it say succses but when i go into models on the radio there not there meaning i have to make all new models this sucks
@the-happy-RC-flyer
3 ай бұрын
Hi Dan, are you selecting the correct back up you made of your radio? Did you back up after adding your models?
@dooleycurl6276
2 жыл бұрын
Thanks for this
@michaeldomanski2472
Жыл бұрын
I added models, but I cannot delete models in the .etx file in the companion app. I delete models, save the file, write to the radio. but when I read from the radio, all the models I deleted are still there!
@the-happy-RC-flyer
Жыл бұрын
Hi Micheal, I think you did not save the Companion file before you restored the back up to your radio or restored the incorrect back to the radio.
@MrBumbles2
2 жыл бұрын
what about starting fresh, elrs tx16s just going to put in elrs tx in a few quads? still use betaflight to set up? no one talks about this at all not migrating whole new radio and i will convert what quads i cant to elrs.
@neomayad
Жыл бұрын
when I read models from the cpu to the tx they are showing up as files in the sd card, in the tx, but not in the model list. It reads zero. and every time i pull files from tx it creates a new whole new file on companion. can you offer any assistance with this matter?
@the-happy-RC-flyer
Жыл бұрын
Are you restoring the model and radio settings to the same radio or to a different model radio?
@neomayad
Жыл бұрын
@@the-happy-RC-flyer silly me. it ended up being an update issue. thanks anyways :-) Great vids though
@kernalmusterd
Жыл бұрын
I have done this, but the models are not showing on my tx16 now Thanks
@the-happy-RC-flyer
Жыл бұрын
What did you do ? Back up and save to your computer? Did you name the back up? Then did you try and restore the back up?
@WingyAZ
2 жыл бұрын
I have Edge TX 2.6 on my Radiomaster TX16s. I have companion TX 2.6 on my computer. I have a problem when I read the models from my radio to the computer it changes the pot warnings. Then when I write them back to the radio they are inverted. Any idea how to fix this?
@the-happy-RC-flyer
2 жыл бұрын
Hi Steve, I have not come across this problem before. The only thing I can think of is you are restoring a different back up. Try updating to the latest firmware and companion. Delete all back ups from your computer, or move them to a different folder, and back up and restore again.
@Johow
Жыл бұрын
Nice Video! Thank you! How do I get my models from OpenTX to EdgeTX? I just copied all my sd card contents from my openTX SD card... but the file format seems to be different. Thx for some help.
@the-happy-RC-flyer
Жыл бұрын
Apologies for the delay in getting back to you. I would suggest manually putting your models on to your radio because I have not had success transferring them from OpenTX to EdgeTX.
@jerryzito6840
Жыл бұрын
Bill, I created a new plane. I want to send it to my radio. I'm not sure I understand "Overwrite all models". Will I lose my current models?
@the-happy-RC-flyer
Жыл бұрын
Hi Jerry, if you want to add a model to your radio using companion. First download the model and radio settings from your radio. Then add your model and restore the models and settings to your radio. Yes, if you restore 1 model without first retrieving your models you will lose them on your radio.
@alexorlovecky6662
Жыл бұрын
Thank's. Two quastion: when I change some model parameters in companion, what the right way to upload it to radio? Because now, I update all model's (and need to update just a single model). And the second quastion: "write backup to radio" and "backup radio to file" buttons are always inactive... How to use them?
@the-happy-RC-flyer
Жыл бұрын
Hi Alex, you cannot update only one model you need restore all the settings and models. Second question is your computer connecting to your computer correctly?
@alexorlovecky6662
Жыл бұрын
@@the-happy-RC-flyer Hi, Thank for answer! And yes, it connected correctly.. Look for example on this video, timing 4:26. And yes, I connected it correctly .. Look at this video for example, the timing is 4:26. It looks exactly like mine.
@the-happy-RC-flyer
Жыл бұрын
@@alexorlovecky6662 if these buttons are not active only two possible things can be wrong back up not loaded into Companion or your radio is not connected to your computer. If you do not hear the tones when plugging in your radio to your computer you have a driver problem.
@jerryzito6840
2 жыл бұрын
Thanks Bill. Where I got lost is where you got your SD structure path. Is it something I should have saved earlier?
@the-happy-RC-flyer
2 жыл бұрын
You need to set up your folders in the way you want on your computer then select the relevant folders in EdgeTX Companion.
@jerryzito6840
2 жыл бұрын
@@the-happy-RC-flyer Thanks Bill. I thought I did. I have SD backup files that I did whenever I make a change. You clicked on "current files on SD. Can I use a backup folder?
@the-happy-RC-flyer
2 жыл бұрын
@@jerryzito6840 yes you can.
@henrikarrour8442
2 жыл бұрын
Got: Can't load MODELS/model8.yml: yaml-cpp error at line 302, column 12:end of map not found Hardware: TX16S MKII AG01 gimbal Software: EdgeTX Companion 2.7.1 Firmware EdgeTX 2.7.1 Don't know what the error is about? Cheers Henri
@henrikarrour8442
2 жыл бұрын
Note to self.. Model 7 was corrupted..? Not sure why..
@the-happy-RC-flyer
2 жыл бұрын
Hi Henri, I have come across this error and my work around is to delete model8.yml then copy one of the other models to your computer and rename it model8.yml and copy it back to your SDCard. I am not sure what is going wrong but this work around worked for me.
@henrikarrour8442
2 жыл бұрын
@@the-happy-RC-flyer I agree as it is exactly what I did. Thank you for taking the time to answer. Cheers Henri
@alwaysflying6540
9 ай бұрын
I'm having a problem with reading and writing settings and dont know why. When i read models there is nothing there but my models are in fact in the radio. Does this have anything to do with the structure path or something I'm missing? I watched your videos and others, and everything looks ok, but im still learning. Any idea's?
@the-happy-RC-flyer
9 ай бұрын
When you retrieve the radio and model settings in Companion does the back up appear?
@the-happy-RC-flyer
9 ай бұрын
@@alwaysflying6540Which radio do you have? You need to just plug your radio into your computer and select usb in the radio options. You do not need to be in bootloader mode.
@alwaysflying6540
9 ай бұрын
@@the-happy-RC-flyer I have a Tx16s. I thought I tried it in usb mode as well with the same result. I can try again
@the-happy-RC-flyer
9 ай бұрын
@@alwaysflying6540let me know how you get on.
@alwaysflying6540
9 ай бұрын
@the-happy-RC-flyer Hi there. I started fresh and it's ok now. I can read and write radio settings but I'm still struggling how to update the firmware using companion. I used buddy tx and it went just fine but I would like to know how to use companion as well. One thing I find strange is that I don't have the new splash screen.
@Heywood-----Jablomeh
2 жыл бұрын
What did you do to create your first radio folder (the structure path) if i were doing this for the first time on my radio the zorro, what structure path would i have chosen?
@the-happy-RC-flyer
2 жыл бұрын
You can set up your folders anyway you want we just need to point EdgeTX Companion to the folder. You could set a radio folder up under Documents.
@emilgabl9069
Жыл бұрын
@@the-happy-RC-flyer What should I do if when I plug the USB into the radio and it doesn't give me the option to pick "USB STORAGE", it just shows "USB". Companion doesn't detect my radio.
@the-happy-RC-flyer
Жыл бұрын
@@emilgabl9069 is your computer detecting your radio when you plug it in, the two tone sounds?
@emilgabl9069
Жыл бұрын
@@the-happy-RC-flyer when I plug the USB from radio into my computer(Mac)I can see the drive and can open it. I didn’t hear any tones. I’ll try again.
@emilgabl9069
Жыл бұрын
@@the-happy-RC-flyer no ideas?
@haroldseaman4243
2 жыл бұрын
Hello Sir I would absolutely love to talk to you in person!!! Ive made mistakes and can not fly anything...
@the-happy-RC-flyer
2 жыл бұрын
Hi Harold, sorry to hear that do you not have a club near you who can help you? What do you need help with?
@haroldseaman4243
2 жыл бұрын
@@the-happy-RC-flyer No clubs I'm probably the only guy with a drone in my town... I was having an extreme amount trouble binding but after many hours of video I've got it!!! Radio Master built a sweet radio(tx16s m 2) but need a degree seems to use lol!!! Thanks for the videos I'll keep watching!!
@the-happy-RC-flyer
2 жыл бұрын
@@haroldseaman4243 Good luck Harold keep at it I am here if you need help.
@gregdavidd
9 ай бұрын
Sorry but you really missed the mark on this video. You completely glossed over the creating of the folders during the model setup because you already had them created in your configuration whereas all of us are starting from scratch. Do I have to manually copy my SD card contents to back it up? What does the backup folder do (the one I specified the path to)? You should get some people to try to follow your videos before you hit publish. I do appreciate your channel in general thought. Thanks so much.
@the-happy-RC-flyer
9 ай бұрын
That was a little harsh but thank you for the comment at the end. There is a fine line between treating people like complete beginners and making them feel they do not know anything. I appreciate you felt the video did not help you I just assumed viewers know how to make folders on their computers. Please keep watching 😢
@gregdavidd
9 ай бұрын
@@the-happy-RC-flyer You didnt read my comment. I wasnt asking how to make folders, I was asking what to do with the folders? After I followed your instructions my folders were still empty and the backup button remained greyed out the whole time. Sorry for sounding harsh. It was not my intention. You did however leave out a lot in this video.
@the-happy-RC-flyer
9 ай бұрын
@@gregdavidd no offence taken 😊
@MsDidits
2 жыл бұрын
Give me setting model t8 pro mode quard drone & simulator drone
@the-happy-RC-flyer
2 жыл бұрын
Check out my T8 Pro Playlist.
@MsDidits
2 жыл бұрын
@@the-happy-RC-flyer I want to flash in opentx but fail to follow your post, that's why I want to ask for a post on opentx for radiomaster t8
@the-happy-RC-flyer
2 жыл бұрын
@@MsDidits which radio do you have the T8 Lite or T8 Pro? If the Lite you cannot update it if the T8 Pro using OpenTX this video should help you. kzitem.info/news/bejne/zWqPq2mke5den6w
@MsDidits
2 жыл бұрын
@@the-happy-RC-flyer I have Radiomaster t8 pro, thanks u respon your subcraber
Пікірлер: 77