Do you enjoy my tutorials? I'd be so grateful if you could Buy Me A Coffee! www.buymeacoffee.com/KarolynsKakes
@AsiaCoffee
Жыл бұрын
OMG… You just saved me! Literally, night and day difference between my prints… Thanks you so much Karolyn! 💜💜💜
@KarolynsKakes
Жыл бұрын
Yesssss!! Edible printers are wonderful...until you have issues like this. I'm glad it helped you! 💜🙏
@tdg1945
2 жыл бұрын
Karolyn, I absolutely adore you! ❤️ ❤️ ❤️ You are the reason I took the plunge and bought my edible images printer! ❤️ ❤️ ❤️ Then I found you on Icing Images video! ❤️ ❤️ ❤️ I felt like a stalker! 😱 😂
@KarolynsKakes
2 жыл бұрын
🤣🤣🤣 I'm so happy you got the printer! How do you like it?
@amandagrinstead4831
Жыл бұрын
Hi Carolyn, on your edible images, how long can you make them in advance before you want to apply them to your cake and after you let them sit in dry a bit would you put them back in the foil bags until ready to use? Thank you.
@KarolynsKakes
Жыл бұрын
Hi Amanda! I usually don't print them more than 4-5 days in advance. I always let them sit out exposed to air (room temp) for about 20-30 min after printing so the ink can dry. If I'm not using them right away, I will put them back in the silver bag until I'm ready to use them!
@mitzieklozotsky5092
Жыл бұрын
Hi Karolyn! This is an older video so I'm not sure if you'll see it, but do you use the software on the edible images site or do you print from your own programs (word, Adobe, etc?)
@KarolynsKakes
Жыл бұрын
Hi Mitzie! I just print from Microsoft Word and haven't had problems.
@MelaninQueen93
2 жыл бұрын
OMG thank you so much for this video my black has been faded with some lines on it and I just unclogged my printer head and replaced my cartridges and had no clue why this was still happening ! I will be doing this in the morning for sure !!! Thanks so much your the BEST !
@KarolynsKakes
2 жыл бұрын
Yayyy!! I hope it helps! 🙏🙏
@goingoutinstyle1317
3 жыл бұрын
You rock! I was wondering why this was happening to my images. Thank you for sharing all your helpful tips and tricks! I have a question.. I received wafer paper when I ordered my printer but never knew what to use it for, any ideas?
@KarolynsKakes
3 жыл бұрын
You can use the wafer paper to print things like butterflies! I have used them before on my cakes and it turns out really pretty!
@dorisbutler6640
Жыл бұрын
What a great idea! I will definitely try this TODAY!
@KarolynsKakes
Жыл бұрын
Let me know how it works!
@christinahadry9263
2 жыл бұрын
Love your videos. I have the same printer from icing images. I have cleaned the print head all my checks are good. Refilled my cartridges but I need a bright pink fit Barbie and it does not do a pretty pink or a brighter purple. It is driving me crazy. I have 50 cupcake toppers to make. I am going to look at the sponges. I had everything outback few hours ago. Any suggestions to get a good pink
@KarolynsKakes
2 жыл бұрын
This isn't my video, but I've done the suggestions learned here and it helped! kzitem.info/news/bejne/pmms34CtcYtejJg
@lizziebeaaar1157
Жыл бұрын
Hello, i recently got a edible printer but i printed an image & it had lines on it, it wasnt fully colored. Do you know why it came out like that? It filled the cartridges before printing too
@KarolynsKakes
Жыл бұрын
Sometimes the sponges can be dry or dirty. You can take the cartridges out, flip them over and wipe around the sponge. If that doesn't work, you may need to get new cartridges.
@marthaadams5777
3 жыл бұрын
I love, love your videos. Did you set your printer up the way icing images says to set it up, such as using the print abrasion? I tried to print a New Orleans Saints pic and the gold turned out yellow. I was just wondering if you set your printer up a certain way. Thank you for all you share with us. I’m going to check my inks. Martha
@KarolynsKakes
3 жыл бұрын
My mom helped me set it up, but she did follow the instructions given with the printer. However, I don't use the recommended iPrint to print my pictures, I just use Microsoft Word (because I haven't had any issues doing it that way.)
@truemakeup801
2 ай бұрын
Any idea why my edible images bubble up after being on my cake for a while? I don’t like using fondant when I’m basically covering the cake in images or wrapping the cake
@KarolynsKakes
2 ай бұрын
Your icing must be perfectly smooth with no imperfections for the image to stick without getting bubbles. If it's not perfectly vertical, you'll get bubbles as well. I always adhere the image to fondant to ensure it stays bubble-free and flat against the cake! Here's a video where I talk about it: kzitem.info/news/bejne/z6tq1ouhe3pieaQ
@bridgettchapman5020
2 жыл бұрын
Well I got my printer like this a couple weeks ago just used it over the last weekend so like 5 days ago and just went to print some more today and they are totally faded so I’m not low on ink what could be the problem here??
@sarahknobel8908
Жыл бұрын
Beautiful! Thank you once again … you’re the bomb girl!
@KarolynsKakes
Жыл бұрын
Thank you love! 🙏
@NirvanaJimenez0992
6 ай бұрын
HELP!! I just install my printer and my icing sheets are coming out orange. I got a lot of green and yellow and it it no printing correctly. I have a conon ts702a
@joyous99999
3 жыл бұрын
Just FYI, you don't have to remove the orange clip and lose ink. Just remove the plug and tilt the cartridge so the ink flows into the sponge. That way there is no waste.
@KarolynsKakes
3 жыл бұрын
Thank you!! I tried that before and it didn't get to the sponge, maybe I was doing it wrong. I appreciate the tip, I'll try it again next time and see if I can get it to work!
@rachelboothe5075
Жыл бұрын
I just got my edible printing system two days ago from Icing Images. I set it up today and when I ran the nozzle check, none of the colors showed up except for black. I looked through the instructions to make sure I had done everything correctly, and I had. I called Icing Images and they told me to vent the cartridges and sent me step by step pictures. I did that and the nozzle check got a little better but still was not totally correct. They also told me to do a cleaning under the Maintenance tab in the Manage Printer settings on the computer. I did that and printed another nozzle check and it was a little better. However, when I did a third nozzle check, it was worse. I am so discouraged. Do you think they could be a bad set of printer cartridges that have dry sponges that just can't be moistened enough with ink? I just feel like there is some trick to this that I am missing. Do you have any advice for what I need to do? Thanks, and I love your videos. I know I will be watching them a lot as I get more into this edible printing.
@rachelboothe5075
Жыл бұрын
I just wanted to update and say I did another nozzle check the next day and it looked good except for the magenta. I spilled most of it 😕 during the venting, When I get another one, I think everything will be okay. I love your videos. They are so helpful!
@loriwillis2369
2 жыл бұрын
you are the best i hope you can possibly help me. i bought a used epson ediable printer from a bakery that went out of business. im having problems with the printer recognizing the filled cartridges. any advice would be appreciated. yes the printer was working b4 this
@KarolynsKakes
2 жыл бұрын
Sometimes the printers can get a little finicky with that. I never experienced that, but I have only used Canon printers. Can you call the company where you bought the edible cartridges from? They should be able to help you. Sorry I am not sure!
@loriwillis2369
2 жыл бұрын
@@KarolynsKakes I've did and they said bcz I'm using a 3rd party ink system (ediable) they were not able to assit me. Thank you for your quick response.
@mindykimmel6932
2 жыл бұрын
Hi!! I just got this printer and have this issue.. I check the ink and they are all not dry! My purples are grey :( Do you have any other ideas I can troubleshoot with! Going mad 🤪 thanks so so much!!
@KarolynsKakes
2 жыл бұрын
Try cleaning the print head, you could have a clog! kzitem.info/news/bejne/uKx8mIymcXigfnY
@ambergarcia9848
Жыл бұрын
My printer is brand new, what would be the reason for the image to be extremely faded on icing sheets 😩 same exact printer
@MISZBHAYVIN
2 жыл бұрын
How did you get your sheets to not have that black square around the images? When I am in cricut design space it shows on all of my edible images.
@KarolynsKakes
2 жыл бұрын
I don’t use circuit design space, so it may have something to do with that program? I print from Microsoft Word.
@MISZBHAYVIN
2 жыл бұрын
@@KarolynsKakes okay thank you so much I will try that.
@TheShycutie08
3 жыл бұрын
You give the best info. I love your channel
@KarolynsKakes
3 жыл бұрын
Awwww thank you love!!
@victorarcos6178
Жыл бұрын
Hi Karolyn, my problem is totally the opposite. It prints too dark the best explanation I can give you is that it prints so dark that red prints brown. Any ideas ?
@KarolynsKakes
Жыл бұрын
The printer settings could be off. This video by Icing Images may help! kzitem.info/news/bejne/xnp8p5quraiIaGk
@vickymarino2611
2 жыл бұрын
Wow! What a difference, thanks for the great tip!
@KarolynsKakes
2 жыл бұрын
Glad it was helpful!
@michellesmith2140
6 ай бұрын
Hello I no this a old video when I print what suppose be green is printing blue can you tell me how to fix it I have did nozzle check nothing is clog
@KarolynsKakes
6 ай бұрын
A nozzle check may look okay, but there could still be a clog present. It sounds like you have a clog in the yellow. Here's a video where I show how to unclog the print head! kzitem.info/news/bejne/qWljy4CZiIxlo4Y
@twistedsprinklescakes3750
2 жыл бұрын
Sooo i just unboxed my new printer from icing images and I didn't replace the ink plugs and all my ink leaked out. I know you deal w/ icing images products do you think they will ship me new ink? And do you think I ruined my brand new printer???
@KarolynsKakes
2 жыл бұрын
Oh nooooo!! You put the cartridges in the printer without the plugs in them? If so, you'll want to take the print head out and clean that and also you may need to clean the printer before the ink dries out. Here is a video on how I clean a print head: kzitem.info/news/bejne/uKx8mIymcXigfnY You can call Icing Images customer service and ask what they can do to help.
@twistedsprinklescakes3750
2 жыл бұрын
@@KarolynsKakes yes I did thank you. I had to buy more ink too. Uggg. Xxoo
@KarolynsKakes
2 жыл бұрын
@@twistedsprinklescakes3750 Okay well hopefully the printer still works okay. Everything is a learning process, I bet you'll never do that again LOL
@twistedsprinklescakes3750
2 жыл бұрын
@@KarolynsKakes yes never again. I will be using your video on how to refill them when my ink comes xo
@Anna-nt1of
2 жыл бұрын
Hi, I have a printer from icing images. Not even a year old...constantly getting clogged. I have been working on it since yesterday. 3 colors aren't printing color at all. Ive done many nozzle cks and cleanings. I practically took this machine apart to clean it. I am out of ideas and about to buy a new printer that I cant afford. Any suggestions? TIA
@KarolynsKakes
2 жыл бұрын
What's the longest you went without printing tester pages? You must keep the ink moving through the system in order to prevent clogs. It happened to me before where I didn't print for a few weeks and I got a clog that I couldn't clear and had to buy a whole new printer. Now I am religious about printing at least once a week, if not more. (I set an alarm in my phone to remind me.) Since I've been doing that, I haven't had any issues. Here's a video on cleaning the print head: kzitem.info/news/bejne/uKx8mIymcXigfnY
@Anna-nt1of
2 жыл бұрын
@@KarolynsKakes Hi, Ty for the quick reply. I had 2 jobs yesterday, one printed perfect, the next just with 2 colors. I am very familiar with edible printers. But I clicked onto another one of your tutorials that I didn't think I needed...it was how to fill the cartridges. I had no idea they needed to be filled so much. That makes sense bc the sponge was drying out. So u fixed my problem .lol I filled all after cleaning the machine. It took 3 try's but the 4th try it was perfect. All the ink flowed nicely. Thank you!
@KarolynsKakes
2 жыл бұрын
@@Anna-nt1of Wonderful! That was an easy fix!
@Anna-nt1of
2 жыл бұрын
@@KarolynsKakes Thank u
@angellsx9632
Ай бұрын
I freaking love you thanks it actually worked 🤩
@KarolynsKakes
Ай бұрын
Isn't it the best when you try something and it's successful?! So glad this worked for you!
@stephanieperez7181
2 ай бұрын
If you don’t use your ink a lot will it dry up or fog up ?
@KarolynsKakes
2 ай бұрын
It will dry out so you either should make sure to print a few times per week or completely remove the cartridges, put the clips back on, wrap them up in plastic wrap, and store in a ziplock bag. Then clean the print head and store that in a bag as well until you're ready to use the printer again.
@sitinormarinamustapa568
Жыл бұрын
Hi... I just try it,, But only haft of my print come out ok, but at bottom of page it's come pale🥺.. Please helo me
@KarolynsKakes
Жыл бұрын
Oh no! How old are the cartridges? You have to replace them every 3 refills. Also, your print head may need to be cleaned. Here's how I do that: kzitem.info/news/bejne/uKx8mIymcXigfnY
@Sweetzandmore
3 жыл бұрын
Thanks Karolyn ...
@AB-dn8xn
3 жыл бұрын
Karolyn could you give a tutorial about where you buy wholesale cake products online. I never know where to buy wholesale
@KarolynsKakes
3 жыл бұрын
I used to buy everything at Global Sugar Art and they stinkin closed because of COVID! So I have been looking around for somewhere, I get a lot on Amazon (depending on the price). I also go to a local store called The Restaurant Store to get boxes and circles.
@ineshahousey6809
Жыл бұрын
Thanks for sharing
@rashshawn779
Жыл бұрын
Do you have to do this for every print?
@KarolynsKakes
Жыл бұрын
No (that would drive me insane LOL), only when the sponge dries out. Usually this happens towards the end of the life of the cartridges.
@rashshawn779
Жыл бұрын
@@KarolynsKakes Thank you for your reply! 😃
@yesysantiago9625
2 жыл бұрын
Can you please link below where do you get your refills inks
@KarolynsKakes
2 жыл бұрын
Icing images website is linked in the description under “Tools I Used” ☺️
@PropellRealtyMedia
9 ай бұрын
What happened with your other edible printer canon mx922
@KarolynsKakes
9 ай бұрын
The print head clogged beyond repair so I had to get a new one.
@PropellRealtyMedia
9 ай бұрын
@@KarolynsKakes oh wow sorry to hear that
@alishabarlowSTC
Жыл бұрын
What do I do when my printer and Ink cartridges are brand new and it prints dull?
@KarolynsKakes
Жыл бұрын
Make sure you have the right settings for your printer on your computer! Here's a video that Icing Images posted showing how to set it up: kzitem.info/news/bejne/xnp8p5quraiIaGk
@ODY0319
3 жыл бұрын
Baby shark do do dooo lol 😂, but thank you for this video honestly! I have a question my edible printer says I’m low in black ink but for some reason I have a lot in there left what should I do about that? Should I just listen to the printer and refill it?
@KarolynsKakes
3 жыл бұрын
How many times have you refilled that cartridge? Is is still printing black okay? That happened to me before with blue and it stopped after I put a new cartridge in there.
@ODY0319
3 жыл бұрын
@@KarolynsKakes this is my new ink cartridge and I filled it up only once to do a test run. It’s pretty everything else but barely black
@KarolynsKakes
3 жыл бұрын
@@ODY0319 when is the last time you cleaned the printer head?
@ODY0319
3 жыл бұрын
@@KarolynsKakes I think last month but it’s because I don’t use my edible ink daily I didn’t want to refill it cause it cost money you know lol
@camillabijingsi5563
Жыл бұрын
@@KarolynsKakes how often must we print on our edible printers?
@solacistic
2 жыл бұрын
what happens if the ink barely comes out even though I have followed these steps ?
@KarolynsKakes
2 жыл бұрын
You could have a clog or need to replace the cartridges. kzitem.info/news/bejne/uKx8mIymcXigfnY
@MultiGemgirl
3 жыл бұрын
thanks for another great video
@KarolynsKakes
3 жыл бұрын
Yesss girl! You're welcome :)
@joannejoiner2711
10 ай бұрын
I have tried this and images still not vivid..what else can I do?
@KarolynsKakes
10 ай бұрын
You may have a clog, here's how to fix that: kzitem.info/news/bejne/qWljy4CZiIxlo4Y
@lorymattos1118
2 жыл бұрын
Great! Thank you.🤩
@emmaford32
Жыл бұрын
What printer settings to set the printer to?
@KarolynsKakes
Жыл бұрын
Watch this video from Icing Images: kzitem.info/news/bejne/xnp8p5quraiIaGk
@lutichaloots5217
3 жыл бұрын
Thank you !!!!!!
@brettziminski5727
4 ай бұрын
Just so you know a easier way to do this is a color test that the printer provides using cardstock paper because it will use all the colors
@mariahutter7081
3 жыл бұрын
WOW!!!
@patriciab2903
Жыл бұрын
CAN YOU DRIP IT BACK IN THE BOTTLES?
@KarolynsKakes
Жыл бұрын
That makes sense!!
@sherrybeauchamp3413
2 жыл бұрын
Why does my yellow look brown and blackish
@KarolynsKakes
2 жыл бұрын
There is still probably a clog somewhere in the print head. Sometimes you have to run hot water through there for a long time to clear it!
@balisnchz7189
2 жыл бұрын
I threw away my clips! 😑
@KarolynsKakes
2 жыл бұрын
You can try to use tape to tape over the sponges when you refill the cartridges. And lots of paper towels. And don’t throw them away next time!
Пікірлер: 102