Vectron is so nice piece of ingeneering. Thanks for video Tyger. 👍
@tygerways6615
6 ай бұрын
It is! Thank you for the feedback!
@Ravenslofty
6 ай бұрын
1:29:33 - I'm sure somebody will correct me on this, but I think the advantage of IGBT over GTO is that IGBTs can switch faster. GTO thyristors are generally limited to about 400Hz, while IGBTs can go up to 1kHz. GTO thyristors and IGBTs act as resistors when transitioning between "off" (cut-off) and "on" (saturated), causing them to get hot, so VFDs control them digitally (pulse-width modulation...ish); by having a higher switching speed you can more finely control the motor for efficiency. KZitem filters links (reasonably), but I suggest watching "Train Motor Sound - What UK Enthusiasts Get Wrong While Japanese Enthusiasts Build Model VF Drives" by Beno, which explains how they work better than a youtube comment can.
@tygerways6615
6 ай бұрын
Great, thanks! :) Here is the electrical engineering knowledge that I am lacking!
@tygerways6615
6 ай бұрын
I really recommend watching the video mentioned. It explains among other things why GTOs do this distinctive "changing gear" sound and IGBTs don't.
@Ravenslofty
6 ай бұрын
@@tygerways6615 glad I could help.
@manwevalr9010
Жыл бұрын
Absolutly beautiful train
@tygerways6615
Жыл бұрын
I know right!
@gtasandman
14 күн бұрын
48:48 what about when you're starting out sometimes the first traction motor cuts out and only 3 run. ive notice on msb using the db vectron it will do this and start to buck.
@tygerways6615
14 күн бұрын
Thank you for your comment! Hm, I have not seen this behavior yet, but I think it is possible. Fro what is stated in the feature description on the forum, the shutdown of 1 (2) traction motors can happen after the power is set to lower than 35% (60 %) for longer than 15 (13) seconds and I have not found any mentioning of a speed or traction effort requirement. So I guess to prevent this when starting the loco, one would have to use a higher power setting at least once within this timeframe.
@gtasandman
14 күн бұрын
@@tygerways6615 I would set the power around 75% all the motors would be on and then suddenly the front motor would drop and then the train would start bucking. Try out one of the locomotive moves on msb
@tygerways6615
14 күн бұрын
@@gtasandman Maybe the axle in question is slipping and the WSP system reacting? I will try one of those services and come back to you.
@tygerways6615
14 күн бұрын
@@gtasandman So, I tried several services on MSB and I wasn't able to reproduce what you described. Either all four motors work as intended, or - on very slippery rails - the WSP system slows down all four axles until no more slips occur. Maybe you can post a video?
@ilkemez9626
5 ай бұрын
Hi, your videos are insane, very helpful. I am trying to learn this train (vectron), almost learning eveeything thanks to you. But there are 3 buttons about pzb/lzb. From left to right: override, release and acknowledge. I cant understand these buttons and my train makes a brake and stop when aproaching somewhere, how can i make it,
@tygerways6615
5 ай бұрын
Thank you very much! I am very happy that you find my videos helpful! :) Those three buttons belong primarily to a quite complex safety system called PZB (in German: Punktuelle Zugbeeinflussung) and are also used for the LZB (in German: Linienförmige Zugbeeinflussung) train guidance system. There is quite a bunch of videos about those systems on this channel where I try to explain the workings of these systems and the use of these buttons. To avoid a penalty brake when approaching somewhere, you might want to start with this video that explains the most important functions of PZB: kzitem.info/news/bejne/rWuEyYuYcKWSnKA Links to videos explaining more advanced features (including the use of the 'Override' and the 'Release' button) are give in the description of this video. I hope this helps!
@planeson2354
7 ай бұрын
Hey, is is possible to get a link to your Discord to access the table? Thanks.
@tygerways6615
7 ай бұрын
Sure thing! discord.gg/pFwfwa5n (valid for another 7 days)
@cascodabici
Жыл бұрын
is the exel calculator for download?
@tygerways6615
Жыл бұрын
You can download it from my discord. Here is an invitation: discord.gg/jVazjXCa (valid for another 7 days).
@adrien_jls13
Жыл бұрын
Where can i find the table ?
@tygerways6615
Жыл бұрын
You can download it from my discord: discord.gg/ATMznTQE (invite valid for 7 days).
Пікірлер: 21