Building an Atmospheric Antenna Topper for the 9 foot pole in one of my other Electroculture / Magnetoculture videos.
Starting off I am using a 1/2 in. copper pipe with a 3/4 coupler that I have drilled a hole into. Next I will add a piece of Zinc All thread using with it some Zinc Nuts and washers. At the end I will add 6 cylindrical Magnets which I will have at the South side of my pole with the al thread pointing North. At the top I am using 14 Galvanized Steel wire that I am going to cut into 9 straight pieces to point straight up with three Ighina Spirals made from the same wire that is all cut at the size of a Royal Cubit. The Ighina Spirals are made clockwise. In addition to the Galvanized Wire and Ighina Spirals I will add three Copper Spirals with one piece of quartz in the center. To Connect the Galvanized wire, Ighina Spirals, & Copper Spirals at the top of the antenna I have a Copper Split Bolt connecter for #8 - #6 wire.
Inspired by Justin Christofleau's work on Electroculture
In another video I will attach everything to connect to my 9ft pole right now this is pt. 1
Using Electro Culture / Magneto Culture techniques as seen on other KZitem Channels@electrocultureYannickVD @CultivateElevate @AndreaDonnoli @PERMAFUTUR
Very much inspired by this video by Yannick Vandoorne - "Démonstration électroculture de l'installation d'une antenne atmosphérique Van Doorne 2023" - • Démonstration électroc...
Thank you for continuing this journey with me!
#Electroculture #Magnetoculture #gardening #GrowYourOwn #DontPanicItsAllOrganic #IghinaSpiral #LakhovskyCoil #Electroculturegardening #cultivate #gardeningtips #gardeningmakesmehappy
Негізгі бет Electroculture / Magnetoculture Gardening - Building An Atmospheric Antenna Topper - Pt 1
Пікірлер: 9