Yvan suggested I do this after I did a smaller travel trailer. I had a red Toyota come into the shop that was oxidized pretty badly. Remember, those were single stage from the factory. I used straight APC and a 3M gray scuff pad and it worked like a charm. Literally cut my time in half! Thanks, Sir!
@Detailers-Business-Academy
Жыл бұрын
Happy to have helped.
@neilwalker5041
Жыл бұрын
Thank you for always keeping me thinking! I have never derailed boats with gel coat but I do live by a large lake so this will be important knowledge for me to learn. I hope your doing well!
@Detailers-Business-Academy
Жыл бұрын
Thank you!
@steveclark2426
Жыл бұрын
Thanks Yvan. I’ve got a friend’s boat in my shop today and was struggling with heavy oxidation. Definitely great timing.
@Detailers-Business-Academy
Жыл бұрын
Thank you
@steveclark2426
Жыл бұрын
Just finished and the 40 year old boat looks like new! Couldn’t have done it without your great advice ( as usual!)
@kimnewling5728
Жыл бұрын
Wow I didn't know any of that on single stage paint. I must have got incredibly lucky. A 1937 fire chiefs fire truck turned out beautifully after compounding heavily oxidized paint. Whew! It still looks great after 2 years. I've got lots more to learn! Thx for the video.
@Detailers-Business-Academy
Жыл бұрын
Thanks for watching!
@alanwallace3253
Жыл бұрын
You continue to amaze with your lifelong learning and wisdom.
@Detailers-Business-Academy
Жыл бұрын
I appreciate that!
@Calendyr
3 ай бұрын
Merci Yvan. Je n'était pas au courant de cette méthode.
@Detailers-Business-Academy
3 ай бұрын
Merci
@DannySauer
2 ай бұрын
At first I thought "what do you mean, you're not going to show me" when I skimmed the chapter previews. Then I listened, and this was actually a really good video. Thanks for not feeling compelled to mix in a bunch of dumb sound effects and unnecessary transitions, etc. - and for staying on-point, just presenting useful information. This is legit quality content. :D
@Detailers-Business-Academy
2 ай бұрын
Thank you.
@lewisreinhold6398
Жыл бұрын
Very informative as usual Yvan ! Thank you
@Detailers-Business-Academy
Жыл бұрын
Glad you liked it!
@thesamsquatch5224
Жыл бұрын
Thank you for this Yvan! I've not yet gotten into this but at least it'll be in the back if my mind. And trying to accept non perfection is hard but we still do our best
@Detailers-Business-Academy
Жыл бұрын
You can do it!
@thepassionofthegoose5472
Жыл бұрын
Fantastic information. Thank you very much.
@Detailers-Business-Academy
Жыл бұрын
Thank you
@ThisOldDetailingDude
Жыл бұрын
Another masterpiece tutorial!
@Detailers-Business-Academy
11 ай бұрын
Thank you! Cheers!
@ronayotte3571
Жыл бұрын
Sage advice, my friend.
@Detailers-Business-Academy
Жыл бұрын
Glad you think so!
@spiceetaco
Жыл бұрын
Love it! Can we get a few reconditions in terms of polished/compounds that you have found that don’t contain said oils/fillers?
@davidruggles996
Жыл бұрын
Yvan typically makes an effort not to promote or knock any products by name on this channel. Whether or not my comment is allowed is up to him. I've found Sonax Cutmax to be a great compound for chalky RV gel coat. It will need a finish polish or AIO though after the cutting step. 3D ACA 500 is another good cutter.
@Detailers-Business-Academy
Жыл бұрын
I prefer not to mention brands here.
@TheBigRedCar
Ай бұрын
Very informative, thank you!
@Detailers-Business-Academy
Ай бұрын
Glad it was helpful!
@johnathancooper4663
Жыл бұрын
We miss you Yvan. When is your next video dropping on this channel. Seems and feels like an eternity.
@Detailers-Business-Academy
Жыл бұрын
Hopefully sooner than later
@LumpyPancakes
Жыл бұрын
Hey Yvan! Do you generally recommend auto detailers branching out into other vehicles? (Marine, RV, Agriculture) If so, I'd love to see more content from you regarding different vehicle types. Not only technique but the business side of getting into it and marketing to owners of these vehicles. Thanks as always!
@Detailers-Business-Academy
Жыл бұрын
If you need extra work yes.
@djsassafrass9126
11 ай бұрын
I second that! Like what you said at the end of this video, about products that you can apply to gelcoat that will build the gelcoat up, instead of wet-sanding, etc.
@originalguy4535
Жыл бұрын
Which DA polisher size is most versatile for DIY detailer and weekend warriors?
@Detailers-Business-Academy
Жыл бұрын
21mm
@LugnutsCarCare
Жыл бұрын
Awesome video! I've heard before that you have to put some kind of acrylic product down on single stage before you can get a ceramic coating to bond to the surface, otherwise it'll just be absorbed into the single stage. Is there any truth to this? If so, what acrylic product would you use prior to coating? Thanks!
@Detailers-Business-Academy
Жыл бұрын
No truth to that.
@michaelinkster4977
Жыл бұрын
You know your stuff! How do you curl the ends of your moustache though? 😢
@Detailers-Business-Academy
11 ай бұрын
Thank you, it been like this for several decades, it knows where to go.
@erichughes6119
Жыл бұрын
Yvan, I just got in a 2014 Silverado that was basically a disaster detail. The plastic door panels are scratched up to the point that they look dirty from afar. Can you polish some of these out with the gold standard polish or will solution finish work on this to bring the color back to being more even?
@Detailers-Business-Academy
Жыл бұрын
Both possible options, do test spots.
@willmtaylor
5 ай бұрын
Do you have an all purpose cleaner recommendation?
@Detailers-Business-Academy
5 ай бұрын
DIY Detail All Clean
@RAZERSDRIVER
4 ай бұрын
When it comes to panel prep - can I replace Windex with something else? This glass cleaner is not available in my country. I found that there is a glass cleaner with ammonia but also with silicone, I guess it's not the best substitute. I wonder if mixture of acetone and IPA will be too aggresive for paint.
@Detailers-Business-Academy
4 ай бұрын
Silicone isn’t good. IPA and acetone would be too harsh
@sandiashinecollc2665
Жыл бұрын
Is this true for headlights? I been using the Cerekote headlight restoration kit n sanding by hand but would like to use my 2 or 3 inch polisher to speed up the process if possible.
@Detailers-Business-Academy
Жыл бұрын
Headlights are very similar
@MikesMarineDetailing
Жыл бұрын
I would love to reduce overhead by trying your custom prep spray but the 1/3 acetone scares me. Is it really safe to use that on all surfaces of a boat? I used acetone to remove a scuff mark once and it left a yellow stain (from a yellow towel). Do you think a mixture of rinseless wash and isopropyl alcohol could also work effectively but be a little safer? I work on boats outdoors in the sun by the way
@Detailers-Business-Academy
Жыл бұрын
Ive never had an issue.
@MikesMarineDetailing
Жыл бұрын
@@Detailers-Business-Academy Ok thanks for the reply. If it works for you, I'll give it a try!
@stephenwhite5444
5 ай бұрын
Great video....if someone doesn't want ceramic coating what are some good wax/sealant products that can prevent oxidation for 6 months of so? For a daily driven car?
Thank to you again for those great advises. Is it true that this homemade acetone/windex mix is a good window cleaner?
@Detailers-Business-Academy
Жыл бұрын
Yes, it is!
@stephenbozzone1116
Ай бұрын
Have you used DIY Detail Gold Standard Polish on gel coat?
@Detailers-Business-Academy
Ай бұрын
Works great
@highonbanana8265
Жыл бұрын
How do you know if a single stage paint or gel coat is too far oxidized for compounding or wet sanding, and better to consider adding techniques? I am used to making test sections, but in this case I would only sand through to primer/bare metal?
@Detailers-Business-Academy
Жыл бұрын
Start with a light polish.
@highonbanana8265
Жыл бұрын
@@Detailers-Business-Academy Always starting with the least amount of cut, and then applying heavier cut. My question was about how to know when a coating is too oxidized to cut/sand, before sanding a test spot and finding the oxidization still there?
@jarodwalker542
5 ай бұрын
Hey Yvan I have some all clean and was seeing if I’d keep the all clean straight or should I dilute it? Is so to diluting it what would you recommend for a ratio?
@C6ceramics
5 ай бұрын
Dilute 15-1
@Detailers-Business-Academy
5 ай бұрын
15/1
@Nundhirribala
8 ай бұрын
How about painting an old red tractor with spray clear enamel?
@Detailers-Business-Academy
7 ай бұрын
It will eventually peel
@dazedv3
Жыл бұрын
Can this method work on heavily oxidized clear coat or is it a completely different process when dealing with clear coat?
@Detailers-Business-Academy
Жыл бұрын
Yes
@mikeb9634
Жыл бұрын
Would a magic eraser work during the initial wash w degreaser?
@Detailers-Business-Academy
Жыл бұрын
Yes, but a no scratch dish sponge works best
@maximelefebvre8987
Жыл бұрын
Est-ce applicable a du plastique de vtt/motoneige?
@Detailers-Business-Academy
Жыл бұрын
Oui.
@Whynotgarage
Жыл бұрын
Would a magic eraser work just as well as a non abrasive dish sponge? With light to medium light pressure? I have a white oxidize 92 Mercedes that I’ll be doing here soon
@Detailers-Business-Academy
Жыл бұрын
Not quite.
@Michelle-Eden
Жыл бұрын
Just spray it with WD40, ...or not.
@Detailers-Business-Academy
Жыл бұрын
Great temporary fix, many people use ATF to send their equipment to auction.
@1stfrompuertorico568
Жыл бұрын
First!!!
@Detailers-Business-Academy
Жыл бұрын
Thanks
@josequiroz4605
Жыл бұрын
I've actually just look at a 32ft 5th wheel rv that needs gel coat restoring.
@Detailers-Business-Academy
Жыл бұрын
Lots of fun!
@josequiroz4605
Жыл бұрын
@@Detailers-Business-Academycustomer don't want polish so I'm guessing a gel coat restorer will work
@thesamsquatch5224
Жыл бұрын
Third lol, I'll leave a more well written comment after watching
@Detailers-Business-Academy
Жыл бұрын
Thank you
@josequiroz4605
Жыл бұрын
first lol
@Detailers-Business-Academy
Жыл бұрын
Unfortunately Humberto beat you by about 6 seconds. Thank you!
@josequiroz4605
Жыл бұрын
@Detailers-Business-Academy apparently it showed no one had commented just yet. bummer lol😅😅
@Detailers-Business-Academy
Жыл бұрын
Humberto is hard to beat.
@detailingintheokanagan
Жыл бұрын
Lmao this is poor advice from an auto detailer. Gel coat oxidization can not be eliminated by using a scrubber and some apc. You can smooth the surface sure, then polish it but unless you are wet sanding or going hard with heavy cut, oxidization will return within months. We call this a hack job in the boat detailing world.
@Detailers-Business-Academy
Жыл бұрын
Have you actually tried this? I’ve been doing it this way for over 20 years, and all my customers are satisfied.
@stephenwhite5444
5 ай бұрын
It doesn't sound like you comprehended to the video very well....he said do the scrubbing before grabbing the polisher, not in place of it....basically knocking down a lot of the rough oxidation first so it'll polish better and easier. He even shared ways to double check to make sure the oxidation is removed rather than just hidden with oils.
@850CANE
Ай бұрын
Are you saying to use the scrubby side of the sponge or the sponge side on the initial cleaning? Thank you for this video!
Пікірлер: 92