I need to know how to disassemble it, I can't get the lid off
@tinaboxford7520
4 жыл бұрын
How do you add the fluid? You stopped the video and skipped that part!
@TacosAreLife
4 жыл бұрын
i know, right??? The MOST important part!
@leftxbehindful
3 жыл бұрын
Lol that’s why I’m here. Everyone seems to skip it.
@donk2895
3 жыл бұрын
I also want to know that. I know all the rest of this video only came to find out how you fill it up which is a mystery to me hate this video
@shannon1446
3 жыл бұрын
You not only saved me from pulling my hair out, you also saved me from having to ask my pissy ass fiancé to do it for me. Thanks 😊
@Bonbonbon739
3 жыл бұрын
Thank you 🙏
@kelleyhiggins327
5 жыл бұрын
Hello- Thanks for the video- I was able to correctly assemble and use the sprayer the first time. It worked very well. I have the one gallon model 1401E. However, the second time I used the sprayed I had problems. (Purchase, first use and second use within 2 months). When I pump to build compression, it seems to build compression, but then all the solution flows out the top. I checked the video and re-assembled, but no joy. :( Any suggestions?
@jerichobrady4179
5 жыл бұрын
Same probelm here. Awaiting response
@dorisbarnes-ware1071
4 жыл бұрын
Kelley Higgins it is a headache
@lornajohnson480
3 жыл бұрын
Am having same problems. Did you figure it out?
@karentinsley3665
2 жыл бұрын
I am having trouble the second time using also
@dianerogers5481
Жыл бұрын
Why wont it build up pressure when pumping
@USprayBugspray
Жыл бұрын
There's a lot of reasons, it would be best if you emailed us support@bugspray.com
@danmerkens7554
4 жыл бұрын
You didn't say how many pumps is to dangerous and your intro is to long
@puzzlefactory6447
3 жыл бұрын
Does anyone know if I can get gasoline resistant for the Eliminator. I called the company and they say no, but somewhere online I saw that they exist. Please Help!!!
@USprayBugspray
3 жыл бұрын
At this time there might be some available but they would be very costly and not practical to produce. The sprayer in this video is about as "cheap" as they come and for sure it would degrade and be useless very quick if used to pump gasoline. At this time we're not aware of any sprayer produced that would handle the solvents in gas for any length of time as they're not required for what our company sells. But I'm sure someone has one and I'm sure it will be pricey.
@puzzlefactory6447
3 жыл бұрын
@@USprayBugspray I thank you much for the info. I must have had an extended seniors moment on this one. I would've bet the baby ! Thanks again.
@yellow_panther
3 жыл бұрын
what is the maximum PSI for the 1401E sprayer?
@USprayBugspray
3 жыл бұрын
Its not recommended to pump it up more than 50 psi. The tank can handle more but not the valves/gaskets, etc.
@BudgetMadam
5 жыл бұрын
Very Helpful thank you
@LuisRamirez-bu3oi
7 жыл бұрын
How come I don't see any replacement parts ?
@w.r.carman3328
Жыл бұрын
I can't get the top off after spraying to refill. Any ideas?
@USprayBugspray
Жыл бұрын
This can happen for several reasons. Most common is lack of "lubrication" on the threads and gasket at the top of the pump. But sometimes the threads of the sprayer can "cross thread"; other times the sprayer can get buildup on the thread (up near the top) which leads to it getting stuck when you tighten it up. . In this case, we recommend you get someone with strong hands try to remove it or if you can secure the sprayer in a vice (use towels around the sprayer so the sides don't get damaged), you can then use a long bar or wrench placed in the handle hole to twist it counterclockwise. . Once opened, be sure to grease up the threads with vasaline or any clear white petroleum lubricant. . We also suggest you watch our "how to winterize your sprayer" video. It details how you should "clean and rinse" your sprayer after every use so it won't get locked up as you describe or have other issues. . Here is a link to that video: kzitem.info/news/bejne/mKB9q4CfhXVpZW0
@w.r.carman3328
Жыл бұрын
@@USprayBugspray thank you. The sprayer is brand new and I only used it once. I tried to get the top off the same day I used it for the first time which was yesterday. I'll give it a shot.
@USprayBugspray
Жыл бұрын
@@w.r.carman3328 New sprayers are prone to being "ill fitting" when new so a "best practice" is to put the pump on and to not tighten it too much, then remove it, then do so again and again, at least three times before its first use. This way its properly seated with less chance of getting stuck. And of course, make sure its got lube on the threads; sprayers sitting in a box tend to get dry so just because its new, that does not mean it will be easy to put on or remove the pump (in fact its usually the hardest at that time). To be clear, the pumps are NOT tested or put together this way "out of production" and likely to get stuck due to the drying/curing process post production even though they all come from the same mold.
@w.r.carman3328
Жыл бұрын
@@USprayBugspray would spraying a bit of WD-40 around it help to pull it off? I know, I'm reaching.
@USprayBugspray
Жыл бұрын
@@w.r.carman3328 WD-40 is a lubricant that problem won't help. Liquid Wrench "maybe" but ideally, getting someone strong enough to twist is what will be needed since its not likely any chemical will penetrate enough to help. Of course if you're located close to our store you can just bring it by and we'll get it handled for you no charge.
@BrandonL_00
4 жыл бұрын
I had no idea you had to pump for compression. Thank you so much!
Пікірлер: 32