Thank you so much for posting this. A friend had one of these old things and lost the combo and/or the batteries died, so could not get it open. Followed your instructions and it opened!!! Just needed a #15 Torx security bit, and some patience drilling thru the door and it popped right open. Thanks again!
@ossieb8587
2 ай бұрын
Perfect fix!! Thnx so much
@arnaudmorel7555
4 жыл бұрын
Thank you so much man, you made my day !!! Opened in few seconds...so happy now :-)
@Beer_Wolf
4 ай бұрын
How the heck do you take off the cover inside?
@srwboy
5 жыл бұрын
You might just be a life saver, I have the exact same safe and the batteries died on it. I'm going to try this.
@lillyniner994
Ай бұрын
how do you remove this kind of safe from the floor - or at least remove the door - bought a condo with this safe in it.
@adolfmeierhofer3728
2 жыл бұрын
Das Notöffnen hat super funktioniert. Der Eigentümer ist überraschend verstorben und hat den Code mit ins Grab genommen.
@houssamsalmi
Күн бұрын
Thnx for the helpful video, unfortunately mine had an error after moving the lock manually, the error is "dsec" all it does is show the error and beeps, thanks.
@methasit3348
4 жыл бұрын
THANKS FOR THIS VIDEO , THIS HELP A ME A LOT.
@jsnow2007
6 жыл бұрын
Want to thank you for the instructions. Followed it and presto...I was able to open and reset. Thank you so very much.
@AI-cg5gn
5 жыл бұрын
Is elsafe E70 type the same ?
@tphcmthosuakhoa229
3 жыл бұрын
Hay qua anh oi
@ossieb8587
5 жыл бұрын
I was about to try this solution on my ElSafe, which is almost 100% the same (it has a small display to show the numbers you are entering), when a ran into a problem. No 15 torx screwdriver (only 20 and up). So I tried something I read somewhere else, that is to use the connector on the ElSafe and see if you can get some outside power into it. On the bottom of the key-pad housing (facing downward) there is an opening in the housing with a bit of circuit-board to fit a service connector. I used a 9v adaptor (DAB portable radio), taped some wires to the 9v connector and started trying the other end of the wires on the circuit board. Keeping both wires on the small left side of the board and punching numbers on the key-pad, I got it to work! It still remembered the code et voila! So no need to drill.
@arnaudmorel7555
4 жыл бұрын
Hi Ossie, I tried your way to open My ElSafe (I have no drilling tool !) but not sure to understand quite well...I'm French...sorry ;-) So, could you explain a bit more about the 9V connector and the circuit board pins, please ? It would help so much ! I've been waiting for years to open this sh... deposit box !!! Thanks in advance. Arnie
@ossieb8587
4 жыл бұрын
@@arnaudmorel7555 Hi Arnie, I used an old 9v adaptor (example: image.allekabels.nl/image/1307564-0/universele-adapter-spanning-uit-9-volt.jpg ). In order to bring electricy to the Elsafe I took a basic electricity kabel (example: www.elektramat.nl/media/cache/catalog/product/N/e/Neopreen-2-aderig-600x600bw0c0q70.jpg ) , stripped both wires at both sides. One end I put one wire in the connector and one on the outside and taped them with ducktape. The other end I used to experiment on the small (left?) part of computerboard below the key-pad. just try options with both wires on different parts of this computerboard, untill the leds of the numbers come up again. Freeze if they do and put in the code to open the safe. When it is open, feed the wire through the same opening all the way in to the battery pack and fix it to the battery connectors (inside the safe), this way you can always open the safe. I can also send you some pictures, just send me a personal message via www.baghuis.com/contact_baghuis , select oscar and put in your email adress. Let me know if you were able to get it open or if you need more help ;-)
@arnaudmorel7555
4 жыл бұрын
@@ossieb8587 Hi Ossie, thanks ! Done on your website... See you ! Arnie
@IsaacHashman
3 жыл бұрын
Worked for me, thank you! But used a 9v battery
@boenhotan6376
2 жыл бұрын
I have an ELSAFE MODEL S30-704, and hope to try your method of drilling a hole on the safe door. as the shape of the key pad is different ,just do not know which spot the drill hole should be. Appreciate very much if anybody can help. B.H.Tan
@ranishahrour564
6 жыл бұрын
Thanks alot man, made my day lol
@kimhongho5743
3 жыл бұрын
Thankyou, I already open my safe box...thanks to share this video.
@mrsmashgaming76
2 жыл бұрын
Does this work on type Eo7 elsafe
@Viewtifulry
6 жыл бұрын
hi workandfish ...i've got a question about my elsafe if your around. Thanks ahead of time.
@WorkandFish
5 жыл бұрын
Sorry did not catch this message. Hope you were able to open
Пікірлер: 24