TRANSCRIPT: Older remotes: right button says “Reverse”, newer remotes have “Speed”. Same meaning below, i.e. “right (not Power) button. “Throttle” means “thumb wheel” below. On/off: long press power button Change forward speed: short press Speed button. Cycles through Lo, Mid, Hi, Pro. Pro has same top speed as Hi with stronger braking & acceleration. Change braking speed: hold throttle in “brake” position then cycle through options with Speed button. Reverse: press Power button twice. Lower left changes from FW (“forwards”) to BW (“backwards”). Cruise control: single press Power button while in motion - when throttle is released the board continues at the set speed until the rider accelerates or decelerates again. Hidden menu Turn remote off then long press both buttons simultaneously until it turns on. On S, only 2 options appear. Use throttle to change speed units from MPH to KM/H. Press Speed button to move to Wheel Speed settings. Use throttle to change number. For Endeavour S, 8 inch wheel has speed of 80 & 7 inch is speed 65. Use Power button again to exit the hidden menu.
@sparksk9
Ай бұрын
Very helpful. Just got an Endeavor 2GT. The wheel speed with 8" tires from the factory is set at 73.......is this correct, or should it be 80?
@ProfessorMarkLewis
Жыл бұрын
Thanks for this video, I could not figure out how to change the brake level until I watched it. On my new 2S there is a "frequency" option in the secret menu. What is the purpose of this?
@PD_Supremo
6 ай бұрын
I have the Pivot S 2-in-1. What are the wheel speed numbers I should put on the hidden menu for the street wheels and the all-terrain wheels? So my speed and mileage numbers are correct.
@user-si9sc2jf9d
7 ай бұрын
Hi, I’ve bought a board from propel ev and it arrived five days ago. I drove it twice. The first time I drove about 2/3 kilometres and the battery died without any warnings, I thought it was because I didn’t charge it when it arrived, so I put it on the charger for like five hours. Today I decided to drive again but unfortunately the battery died again after just 3/4 kilometres again without any warnings. It’s a little cold outside but it’s not under the zero. What is the problem and what should I do now? It’s pivot gt 2in1
@leebehzadi8373
Жыл бұрын
Hey There I just got the Endeavor2 GT and i dont see how the front lights turn on? they say with the remote but there is nothing on the remote nor the hidden menu Help!!! thxs
@josebutt-seco2680
Жыл бұрын
Hi there. Not sure if anyone answered your question. I have the same board. Just press and hold (3 seconds) the button on the right; it says ""reverse", but if you hold it, it will turn the lights on. I hope that helps. -Gru
@jayd8350
2 жыл бұрын
Can you do the same for the pro, my board un-paired and I can't get it to reconnect 😵
@condor7782
2 жыл бұрын
Same happened to me, how did you resolve this issue ?
@jayd8350
2 жыл бұрын
@@condor7782 my receiver was dead, propel sent me a new one, for free, and I was over the warranty time, I only have to pay shipping 30$
@condor7782
2 жыл бұрын
@@jayd8350 Thanks for the 411 Jay D, did you call them ? I can't find a #. I did send them an email. Thanks again.
@matthewblocksom283
2 ай бұрын
Link to video for the Color Screen Remote?
@propelvirtualgarage963
2 жыл бұрын
Sorry everyone. I forgot an important part and had to edit and reload. I lost a few of the replies. Please reply again and I'll be happy to answer your questions
@PD_Supremo
5 ай бұрын
What are the wheel speed numbers for the Pivot S?
@luisrivas5349
Жыл бұрын
Hi ! Thanks for this video, makes everything clear on how to use the ling yi Remote, just one additional setting in the hidden menu of the Endeavor 2 S, it shows a 3rd option "FRECUENCY", what difference it makes to change it ?? regards
@propelvirtualgarage963
Жыл бұрын
Do not change that, its the frequency your remote works on, leave at factory setting
@MOLHAMSTAR
Жыл бұрын
HI , i have s2 almost brand new , when i accelerate with the board with fully charged battery , 2 or 3 lines from the battery go away until i slow down . is that normal ? . thanks for answering me
@propelvirtualgarage963
Жыл бұрын
Yes, totally normal
@MrAussieposse
8 ай бұрын
So if 8” is 80 and 7” is 65 would that mean 6” would be 50?
@condor7782
2 жыл бұрын
Hi Russ, You & your channels 411 are very helpful. I received my Propel Endeavor about a week ago. 1st ride worked fine, went about a mile. When I came out of a store, It would not work. I had fully charged the remote & board. The power 🔋 bottom is always on? It turns off with remote--for 3 seconds then comes back on. How do I defrag & reboot- or? Please help! Going nuts, want to go for a ride. Hope to hear from you soon. 👍 Sssss model
@propelvirtualgarage963
2 жыл бұрын
Please send this info to services@ridepropel.com and we'll get you sorted asap
@devinwilliams7150
Жыл бұрын
Hello propel this is Devin. I have my propel endeavor that I have only ridden 200 miles on and it already stopped charging and won’t turn on.
@propelvirtualgarage963
Жыл бұрын
H Devon, please contact services@ridepropel.com and we will get a tech to help figure out whats up.
@loucam-l6214
Жыл бұрын
Hi Russ, I was just wondering what the wheel speed option is for? And/or how it works. I also have the stock 8 inch wheels, so I guess I'll take your word for it and set it to 80.
@propelvirtualgarage963
Жыл бұрын
These are preset from the factory. Only time youd change it is if you changed tire size. This cant hurt you or anything, its just a number to let the esc know what size tire youre using for tracking mileage accurately
@loucam-l6214
Жыл бұрын
@@propelvirtualgarage963Hello again, coming back to you a couple months later because after playing around with propel's 7" tires I started to wonder if I could get my hands on tires larger than 8" for the endeavor. I tried looking myself online but never found anything. Would you happen to know anywhere I could find such a thing?
@jrl1685
2 жыл бұрын
Whats the wheel speed in the hidden menu of the x4s?
@mrpabs5864
4 ай бұрын
Can someone tell me how to control the damn lights on the endeavour 2 GT
@sparksk9
Ай бұрын
Hold down the speed (right button) for 2-3 seconds). Same thing to turn them back off.
@kizzorama
2 жыл бұрын
I noticed that when I go downhill I can’t decrease the brake pressure. I can only release them. I don’t have issues on flat surfaces. For example, going downhill If I brake 80%, then I release them a little to 60% nothing changes it is still at 80%. If I release them to 0% then I can apply 60%. Any idea how to fix this?
@propelvirtualgarage963
2 жыл бұрын
What is your email, I'll have one of the tech reach out to you. Also, is this a Pro or an S?
@kizzorama
2 жыл бұрын
@@propelvirtualgarage963 thanks its an S. I've emailed support. Dont want to post my email publically.
@nadjadraganova9310
Жыл бұрын
Hi. Can i change to 99 wheel speed on endeavor s. 8’? If not, why???! On 80 WS I have 51 km speed. On 99 it 63 km speed. I am not tested it on roar yet👌 Best regards!
@propelvirtualgarage963
Жыл бұрын
You can, follow the link below to learn how to find the hidden menu. For an S I believe it should be set at 85 or 87, I'll get clarity tonight. Just know, all that does is sync you mileage and speed to be realistic, you wont hurt anything changing it I'll get exact # for you tonight kzitem.info/news/bejne/2XqKqYCBpKmph2U
@AlexJoneses
2 жыл бұрын
what are the chances this pairs with an older hobbywing esc?
@propelvirtualgarage963
2 жыл бұрын
O% This is a lingyi esc/remote
@cobye60
2 жыл бұрын
Hi, Just received endeavor S. How do I reverse? Tried it on remote, not seem to be working.
@propelvirtualgarage963
2 жыл бұрын
Press left button twice
@propelvirtualgarage963
2 жыл бұрын
All set?
@jshinn123
2 жыл бұрын
The controller is so uncomfortable
@propelvirtualgarage963
2 жыл бұрын
Thats one we dont hear very often. Most riders enjoy the size and shape of the lingy remote
Пікірлер: 41