JEFF AND THE TEAM ARE THE BEST. I SPEAK FOR ALL OF CANADA. YES I HAVE THE ENTIRE COUNTRY BEHIND ME. CHEERS.
@TheRevitKid
2 жыл бұрын
I love my neighbors to the north! Oh Canada!
@patriklundqvist6237
2 жыл бұрын
The best explanation of energy analysis in Revit I have seen! Great demo and topic Jeff and Dan!
@DanielStineNow
2 жыл бұрын
Thanks, Patrik... glad you liked it!
@TheRevitKid
2 жыл бұрын
Glad you enjoyed! Thanks for tuning in!
@ryanwallace4686
2 жыл бұрын
JEFF, THANK YOU SO MUCH FOR WHAT YOU DO FOR ALL OF US. NOT SCREAMING JUST DRAFTING......HENCE CAPS.
@TheRevitKid
2 жыл бұрын
Haha, I read all caps just like no caps these days... I get it. Cheers!
@MahmoudCharif-MaxArchitecture
2 жыл бұрын
That Tip is actually awesome to use for everything!
@TheRevitKid
2 жыл бұрын
Glad you think so!
@theslacollier1
2 жыл бұрын
love it! missed it live! great post, thanks for sharing!
@DanielStineNow
2 жыл бұрын
Thanks, Thesla! Glad you liked it:)
@TheRevitKid
2 жыл бұрын
Thanks for tuning in Thesla!
@nkyibe1299
Жыл бұрын
thank you so much..finally i understood a bit about energy analysis
@TheRevitKid
Жыл бұрын
Cheers! Glad you learned from it!
@bimpure
2 жыл бұрын
Late to the party, but this has been super insightful and helpful! Thanks Jeff and Dan.
@TheRevitKid
2 жыл бұрын
🤘
@numnumbirdynumnum
2 жыл бұрын
Great stuff. Thank you Jeff and Dan!
@TheRevitKid
2 жыл бұрын
Cheers! Glad you enjoyed! Thanks for tuning in!
@digitalcontractservices7901
2 жыл бұрын
that was an amazing BBB tip from Beth - boss move Beth. That's huge
@TheRevitKid
2 жыл бұрын
Yes it was! This audience is full of awesome tips! I love it!
@urbancolab
2 жыл бұрын
Excellent walkthrough. Thanks Dan! Any thoughts on comparison to cove tool?
@sertactimar3267
2 жыл бұрын
thank you !!
@TheRevitKid
2 жыл бұрын
Cheers !!
@TimHalvorson
2 жыл бұрын
North Dakota State University represent!
@KervinCalero
2 жыл бұрын
Sick tip
@TheRevitKid
2 жыл бұрын
For real! Thanks for tuning in and thanks to Beth for sharing the tip!
@CuongGIK
2 жыл бұрын
Thanks Jeff and Dan. I have a question: what is the role of Green Building Studio (GBS) in energy analysis. How GBS interacts with Insight.
@TheRevitKid
2 жыл бұрын
They are one in the same... Sort of, from autodesk: "Green Building Studio is the back end engine for Insight360. Insight360 provides a sensitivity analysis and combined factors for high performance building design. You can use insight360 to have real time interaction with the design parameters and compare the performance with benchmarks." I am sure Dan has an even better explanation.
@CuongGIK
2 жыл бұрын
@@TheRevitKid Thanks Jeff
@DanielStineNow
2 жыл бұрын
@@TheRevitKid Right... you can even open GBS and see all of your Insight runs. But we almost never need to do that.
@raminsamimi6970
2 жыл бұрын
Hello good time. I want to do energy analysis for one day per year in revit, how should I do it? Also, for this purpose, I want to enter the ambient temperature manually, in which part should I do it?
@rspierenburg
2 жыл бұрын
Is Insight another Revit plugin? Analyze tab only shows Lighting and Solar on my Revit
@DanielStineNow
2 жыл бұрын
The Revit side of Insight is built-in... on the Analyze tab, in the Energy Optimization panel (these groups of commands prep a model to push out to Insight).
@josephhuether1184
Жыл бұрын
Great overview. My only comment towards the end is that using the term “steel framed building” when you mean “cold formed metal stud framed wall”…load bearing or not…may be confusing to some. For me “steel framed” means steel columns and beams.
@TheRevitKid
Жыл бұрын
Fair enough....
@JoseAnd97
Жыл бұрын
I watched an older video (2017-2018 ish) and noticed that you could get heating and cooling loads in Insight too, however I haven't been able to find it, has that feature been removed in any recent update?
@numnumbirdynumnum
2 жыл бұрын
I've been toying with this in RVT2023 and find the UI to be classic RVT (graphically and syntactically pretty bad). So here's my Stupid Question(s) 1) Is it correct that the "Use Conceptual Masses and Building Elements" setting recognizes element geometry but not element thermal characteristics until you go deeper and check "Detailed Elements". 2) At about 1hr, Dan talks about getting a more sophisticated measurement and does a Schematic Types override of an Exterior Wall. Then he talks about about RVT automatically derating the R-Values to account for thermal bridging. I noticed that the wall he picked was "R-13+3.8 metal frame wall" if you look to the right and divide 1 by the given U-Value, you get the R-Value of 9 that shows up in the Analytic Surface properties dialogue box. So is it correct that Dan's use of the term "derating" means "dig deeper and don't trust the naming of the wall types."? 3) When I check the "Detailed Elements" box, the R-Value of the Analytic Surfaces matches the R-Value that I see in the Edit Assembly dialogue box for the Wall Type. Is it safe to assume that The Factory has automatically derated the thermal properties of each wall layer? If not, how does one correct for that? I Thermal characteristics are often labelled as if they are a monolithic material but except for a mass timber building, one wouldn't have a solid pine wall.....in the case of a residential stud wall where one has wood studs and insulation co-existing, how would one label that layer and assign proper thermal values? What would one do in the case of an antique house with wood studs but no insulation?
@numnumbirdynumnum
2 жыл бұрын
I think the answers are Yes, Yes, and No. Dan give more detail on derating here. bimchapters.blogspot.com/2021/05/creating-custom-thermal-asset-for-revit.html
@EngineerK
Жыл бұрын
Great talk. The audio isn't balanced between the two of you which is a bit frustrating
@bhaweshmishra1254
2 жыл бұрын
If anyone may help me with Green Building Studio carbon emissions, as it is not showing any carbon emissions for any building type in any location.
Пікірлер: 42