Yea, right….you give one the impression this is easy. It requires years of learning, an artistic spirit and steady hands. You do some beautiful work Saen. Thank you, so much, for sharing your process…it’s intriguing to say the very least.
@SaenBanbenjarong
Жыл бұрын
Thank you
@Ed-ty1kr
5 ай бұрын
A tell tale sign of talent, is when someone makes something look easy.
@krudeone007
6 ай бұрын
I wish I had your talent because this is exactly what I would do to my motorcycle. This is amazing! You are truly a master of your craft
@SaenBanbenjarong
5 ай бұрын
Thank you very much. I'm sorry for replying you late.
@gawni1612
Жыл бұрын
Omg that's royal. Can you show how you polished it up?
@tedbundy8087
2 жыл бұрын
Beautiful work friend Thanks
@SaenBanbenjarong
Жыл бұрын
Thank you to
@andrewvitale7128
2 жыл бұрын
Sir you have talent! Super consistent while keeping a nice flow on a large seemingly awkward project. Thanks for sharing.
@SaenBanbenjarong
2 жыл бұрын
See more of my work on my Facebook page. Saen Banbenjarong
@joannaramirez1698
5 күн бұрын
What machine are you working with if you don't mind me asking
@williamowings6857
Жыл бұрын
Looks really nice. Big pieces with compound curves are tough. I don't do it for living. But even just decorating my own stuff. Noticed he was wearing medical tape like I do sometimes. Flat part is the most comfortable. Over a curved edge will rub a nasty blister on your finger fast. I think straight edge medical tape better than the v patter ones and it's only $1 a roll. Actually learned that trick from a leather worker. They need dexterity of working with out gloves with the protection of gloves. So just wrap their fingers any place they know would otherwise get blisters.
@SaenBanbenjarong
Жыл бұрын
Thank you
@PEACEKEEPER-mm3js
5 ай бұрын
เครื่องแกะแบบนี้ หาซื้อที่ไหนครับ?
@SaenBanbenjarong
5 ай бұрын
สอบถามได้ทางเฟสบุ๊คครับ Saen banbenjarong
@r11449
11 ай бұрын
Lovely work. How many total hours do you think you had in it up to chrome?
@tedbundy8087
7 ай бұрын
Clase maestra de gravado
@tedbundy8087
7 ай бұрын
Beautiful work brother 👌🙏🙏🙏🙏🙏🙏
@SaenBanbenjarong
5 ай бұрын
Thank you
@raymondmirabal5879
9 ай бұрын
How much did it cost to get it done? Nobody ever wants to say!
@SaenBanbenjarong
5 ай бұрын
I'm sorry for replying you late. You can contact me on Facebook Saen banbenjarong.
@andrewbull3537
Жыл бұрын
Whoa !!!.....absolutely brilliant 👏
@SaenBanbenjarong
5 ай бұрын
Thank you
@shawnwhite5523
5 ай бұрын
Is that a mini air chisel
@SaenBanbenjarong
5 ай бұрын
Yes
@raymondmirabal5879
10 ай бұрын
Are you using a spring air palm engraver or springless? And what palm piece can you show your set up?
@SaenBanbenjarong
5 ай бұрын
With spring, I apologize for the late reply.
@justmyownpersonalopinion
2 ай бұрын
Does it affect the integrity of the part?
@jokersengravings5259
Жыл бұрын
Beautiful work
@SaenBanbenjarong
5 ай бұрын
Thank you
@ProNoobRC
11 ай бұрын
Amazing work! Can I ship you some parts!?
@SaenBanbenjarong
5 ай бұрын
I'm sorry for replying you late. You can contact me on Facebook Saen banbenjarong.
@tedbundy8087
2 жыл бұрын
Beautiful work brother thanks thanks
@SaenBanbenjarong
2 жыл бұрын
See my work on my facebook Saen Banbenjarong
@2010flhx
9 ай бұрын
What would that cost me for you to do that on my primary?
@SaenBanbenjarong
5 ай бұрын
I'm sorry for replying you late. You can contact me on Facebook Saen banbenjarong.
@eight-dg3oz
Жыл бұрын
What kind of engraver is that you are using
@Javi_royale
Жыл бұрын
What engraving tool are you using for this?
@SaenBanbenjarong
5 ай бұрын
Air engraving machine
@SleeplessCeo
3 ай бұрын
What tools are being used ?
@raymondmirabal5879
10 ай бұрын
What degree of bit do you use and how and what do you use to sharpen them
@SaenBanbenjarong
5 ай бұрын
I'll make a video next time.
@guzzifabrication3448
Ай бұрын
Nice
@diymthuanrauvt
Жыл бұрын
verry good you
@SaenBanbenjarong
5 ай бұрын
Thank you
@turboflacko946
Жыл бұрын
🎉blessed ok
@SaenBanbenjarong
5 ай бұрын
Hi
@lahsanamhal7880
5 ай бұрын
هذا جميل وائع❤❤❤❤
@SaenBanbenjarong
4 ай бұрын
Thank you
@robeccs
2 жыл бұрын
Wow you have an awesome talent 🍻👍🏼
@SaenBanbenjarong
Жыл бұрын
Thank you
@ConqueringWhatsMine
2 ай бұрын
Went crazy
@jasonlaffatigue2560
Жыл бұрын
Hello, could you tell me the name of that tool? Thank you
@SaenBanbenjarong
Жыл бұрын
brand name engraving machine dzq
@bayviewbud1539
8 ай бұрын
What took are you using to do your engraving
@SaenBanbenjarong
5 ай бұрын
Air engraving machine
@giwangpvcartslamp1349
2 жыл бұрын
Nice broow🔥🔥🔥
@SaenBanbenjarong
2 жыл бұрын
Thank you
@amitabanker2838
Жыл бұрын
Beautiful 🥰
@SaenBanbenjarong
Жыл бұрын
Thank you
@Jay-cz5gj
Жыл бұрын
This looks amazing! Hope someday I can get this good😱
@SaenBanbenjarong
5 ай бұрын
Thank you
@mulanjamilah7849
Жыл бұрын
Make tutorial drawing scroll please
@SaenBanbenjarong
5 ай бұрын
I'll make a video next time.
@mulanjamilah7849
Жыл бұрын
Grs tools? How many degrees do you use for out line!.?
Пікірлер: 110