Thank you you helped me finally set up my bike don't forget if you lock your bike in p8 by accident you put 1212 and it bypasses to set it up again
@BRichSolution
10 ай бұрын
Thanks for the feedback
@NajmulHasan-xu1jo
6 ай бұрын
tnx man i was fucking up with the password and didn’t remember that ..after starting reading the cmnt i got u😂❤️
@chocochicochef
3 ай бұрын
I need help!
@DoctorMrBeazt
3 ай бұрын
What's up
@EuroVenture-up5zp
2 ай бұрын
Which button is bypass I don't know bypasses my cycle is stock because of P8 😢😢😢 seriously I am like crying 😭
@martinburdge8820
Ай бұрын
Thanks for running through the controls on the engwe m20 very helpful information.
@BRichSolution
Ай бұрын
Glad it was helpful!
@Unknownislamg
9 ай бұрын
Legend for this video I couldn’t find this anywhere what the settings actually do like P6 but you explained perfect thanks 🙏
@BRichSolution
9 ай бұрын
Glad it helped
@ss-sh6nb
21 күн бұрын
Great video, thank you
@BRichSolution
21 күн бұрын
Glad it was helpful
@ZpaztiK_TaktikZ
Ай бұрын
For those who can't adjust speed in +- menu when you enter the "+-" menu hold power button and + together on P1 untill screen flashes with 60kmh. The you can increase amps to 25... Other than that there's nothing you can do. Bike will top out at 27/28mph .
@BRichSolution
Ай бұрын
Thanks for the info!
@chiisuigintou
Ай бұрын
Very helpful, if I wouldn't have tried this already.,. The thing is, pushing + and - simultaneously doesn't open this illusive settings changer.
@BRichSolution
29 күн бұрын
sometimes if you push one button first and not simultaneously it will not enter advance menu
@theotsilfoglou627
9 ай бұрын
Thanks for the help bro...
@BRichSolution
9 ай бұрын
Happy to help
@DerekGRIMWOOD
Ай бұрын
I managed to lock myself out on P8 , the release code is as advised 1212 however despite several frustrating attempts over some 30 minutes the code was not accepted. Then suddenly the unit decided it was right & allowed me to reset. Seems there is some kind of inherent fault.
@BRichSolution
Ай бұрын
Interesting and thanks for the feedback
@lillbuck325
Ай бұрын
Thx man ! I was wondering if by reducing the Amps it would lower the speed of each electric assistance stage: Like i beleive taht with the first assistance, the bikes goes up to 20/25 km/h. And i would love to like put it at 10 km/h . Is it possible you think ? or is there an option dedicated to that ?
@BRichSolution
Ай бұрын
Yes lowering the amps & speed the range will go way up
@sector7676
23 сағат бұрын
Hey thanks for the video but my question is you had the tire diameter at 23. Shouldn't it be 20 since they are 20x4 tires?
@BRichSolution
22 сағат бұрын
23” is the outside tire diameter of the 20x4 wheel
@sector7676
22 сағат бұрын
@@BRichSolution ohhhh. Ok thanks 😅
@enemy1704
Ай бұрын
I see a Bluetooth logo on my screen, what does that do ?
@BRichSolution
Ай бұрын
I am not sure maybe for future use or programing at the factory
@peterjervis7028
Жыл бұрын
Hi there,very informative video,although I have a problem,my display is now stuck on P8 and the 4 digit display is flashing,I have tried to reset to factory settings as you described holding the power and plus button but no go.any advise please as my M20 won’t let me power up?Kind Regards Peter
@BRichSolution
Жыл бұрын
Try password 1212 if that doesn’t work reach out to manufacturer or seller
@peterjervis7028
Жыл бұрын
@@BRichSolution cheers Bro worked 1st time,much appreciated 👍
@mohammedsaleh7121
9 ай бұрын
Cool. If you could upgrade or do something for the display. The buttons so small when you want to change from 1 to 5 during driving
@BRichSolution
9 ай бұрын
I agree PAS + and - too small. Sold the bike and bought a faster Ridstar Q20 with mote comfortable seat too
@christophercollins1959
3 ай бұрын
My bike initially had 8 pas modes after some messing around now I can only reach 1-3 any idea how to adjust back?
@BRichSolution
3 ай бұрын
See user manual and worst case factory reset see section 3.2 myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@christophercollins1959
3 ай бұрын
Yea I’ve already gone through this manual as well as an older one and still haven’t been successful have reset multiple times not sure what else to try or what parameters to change have gone through every p setting 1-8 none change the amount of pas modes
@christophercollins1959
3 ай бұрын
I just got this a week or two ago and before understanding what I was doing I ended up just resetting to default which is what brought me to this state (bought this second hand fyi so not sure what the other guy did)
@arturbier
Жыл бұрын
Hi! And what happens if you set the voltage to 24? And what are the magnetic sensors responsible for? I would like to increase the sensitivity of the pedaling
@BRichSolution
Жыл бұрын
Not sure… I did set volts once to 36v to extend my range on long rides but it cycles the battery below BMS
@thertsr9999
10 ай бұрын
@@BRichSolutionwtf I put mine on 36v 25amp and the controller exploded
@ytpcgalaxy
10 ай бұрын
@@thertsr9999😂now you gotta get a new bike
@katarzynaprazewska1200
Ай бұрын
Hello, I’ve bought mine Engwe m20 750W, but I’ve got one with the manufacture sticker saying it’s 250W. I’ve contacted Engwe and they are saying that my bike is actually 750W and “The 250w mark on this sticker is only for customs clearance”. Have you guys had the same problem? And of course I can’t unlock the speed 🤨
@BRichSolution
Ай бұрын
Can’t unlock it? Does the screen have a passcode? If so try 1212 or ask engwe for passcode
@viktorodjov2726
4 ай бұрын
Can you change the speed limitation on the EU version of the bike?
@BRichSolution
4 ай бұрын
Yes, but with 250W motor doubt you can go more them 32 km/h
@kezmer
7 ай бұрын
Hello, the sensory speed make faster to reach 25km/h when u pedaling?
@BRichSolution
7 ай бұрын
Yes
@kezmer
7 ай бұрын
I must to make it lower or higher than 12? (My currently is 12)
@MilliJf-nf1ki
Жыл бұрын
Great video! Can you adjust the brightness of the screen? Can’t figure it out on mine. I mean like besides the dimming option, your screen seems brighter than mine.
@BRichSolution
Жыл бұрын
I think mine looked brighter cuz it was in a dark garage. I can only dim the screen one setting; see video at 1:06
@Sivlelvis
2 ай бұрын
I have the same controller, but when I go into the advance settings, it goes to P0 and I can’t advance it past that it has four numbers I can change at the bottom to start off at 000 but I can’t get into the advanced settings for the real size and changing the speed
@BRichSolution
2 ай бұрын
Ask engwe for the passcode
@Polar-td6of
27 күн бұрын
🙏🙏🙏
@BRichSolution
26 күн бұрын
Thanks
@trevjordan5460
Ай бұрын
Hi when my m20 is in p3 setting it will not show me a number underneath just two lines flashing
@BRichSolution
Ай бұрын
Not sure ask Engwe
@trevjordan5460
Ай бұрын
@@BRichSolution thank you
@timray4988
25 күн бұрын
How does your go to 25 and mine go to 20. I want the extra 5 on mine. Please help
@BRichSolution
25 күн бұрын
make sure P03 is set to 60 kmh and P06 is set to 25 amps
@Unknownislamg
9 ай бұрын
Hi just wondering what settings would you recommend changing for long rides I would like to ride it for a longer time rather than speed or is it best to just use lower assist
@BRichSolution
9 ай бұрын
Change the max amps from 22A or 20A to 15A to prolong your range
@Unknownislamg
9 ай бұрын
@@BRichSolution thank you so much for your reply
@euro35maks
2 ай бұрын
Author, thanks for the video. How to remove speed limits? My ENGWE O14 bike travels at a top speed of just 26 km/h.
@BRichSolution
2 ай бұрын
Try passcode 1111 if that does not work then contact Engwe
@euro35maks
2 ай бұрын
@@BRichSolution You can find out more about exactly how to do this! and where to enter this password?
@euro35maks
2 ай бұрын
@@BRichSolution Thank you. Can you be more specific about where and how exactly this code should be entered?
@awaisiqbal1897
15 күн бұрын
Hi how I change into just power without assistance????
@BRichSolution
14 күн бұрын
I don't see a setting for disabling the Pedal assist. You could dry to disconnecting the cadence sensor on the pedal crank at the controller to see if that works
@genasgenas
9 ай бұрын
Hi . Could you tell me please if its possible to choose 9 level instead of default 5? In other Engwe bikes with YL80C display you can have up to 9 levels and fine tune each level from 20% to 100%
@BRichSolution
9 ай бұрын
Im not sure… I sold my Engwe as seat was uncomfortable and bike was too slow
@kherber1
3 ай бұрын
I can't adjust my speed higher than 25kmh, and I can't get the bike to work in throttle only mode. I've tried all suggestions in videos etc. hope you can help
@acp2681
3 ай бұрын
I got mine yesterday and can’t adjust that either. The plus & minus buttons do nothing on that section. I’ve emailed ENGWE and they said to do factory reset which I’ll try when home.
@BRichSolution
3 ай бұрын
Ask Engwe support they are helpful
@kherber1
3 ай бұрын
cheers anyway I will keep trying. Engwe respone has been to just send me links to KZitem video. Engwe uk don't seem to be mega helpful so far
@acp2681
3 ай бұрын
@@kherber1 I’ve emailed them and sent them the video of me trying to unlock the speed and they’re sending a new digital screen. When you go into the P3 settings, do the plus & minus buttons do nothing like mine? It’s strange as they work in the the other sections of the menu.
@nevazhno1312
3 ай бұрын
@@acp2681I have same problem. If u fix it let me know pls
@jalindell
5 ай бұрын
Anyone know what the wheel setting should be? the diameter of the tire or just the wheel? Cause it is set to 26" from the factory, but the wheels are 20"
@BRichSolution
5 ай бұрын
adjust wheel size to speedometer accuracy. Use GPS app on phone to confirm. I set mine to 22" which waqs accurate lower speed and high speed off by 2 mph
@rats2864
3 ай бұрын
I accidently sent a password on the display and can't remember what I put it as. Is there a way to reset it or something?
@BRichSolution
3 ай бұрын
Ask seller or manufacturer
@compa8164
4 ай бұрын
Hello bro, you know how to remove the password, I was touching some things and by mistake I activated it and I don't know what it is. Thank you
@compa8164
4 ай бұрын
When I turn on the bike directly, I'm in the password menu and I can't restart it from the factory
@compa8164
4 ай бұрын
I already got it, don't worry 🤣🤣🤣🤣
@BRichSolution
4 ай бұрын
As seller manufacturer for password
@tonyelliott4541
9 ай бұрын
I have the same display but on a different ebike. My settings are set at P0 and 4 0’s underneath that. Is there any specific number combinations? The bike company isnt very responsive
@BRichSolution
9 ай бұрын
I believe that is password to lock settings
@tonyelliott4541
9 ай бұрын
@@BRichSolution okay cool so im assuming the bike company will be the ones to help me figure out the 4 digit code. Thank you
@user-rb6xj8nl4z
2 ай бұрын
Hello bro, i forgot password on the first day of purchase😢😢😢 Wanted to set it up to get normal speed and accidentally put a password that I can't remember. What can i do about it how can i unlock it ???
@BRichSolution
2 ай бұрын
Try 1111 or ask seller
@user-rb6xj8nl4z
2 ай бұрын
@@BRichSolution Ok thanks
@ziauddin443
3 ай бұрын
Hello just want to know that i want to reduce the speed is that ok or i should Reduce the amps also
@BRichSolution
3 ай бұрын
Ya reduce amps will lower speed and increase range
@brunomedeiros8968
2 ай бұрын
I think I don't need to reduce the amps to get lower speed. Because my Engwie M20 has only one battery. I left to 13 amps. Is my was with two batteries I will leave. So I set in the P3 to 60 km and it works. I set to use all the magnetic heads and it works very well.
@brunomedeiros8968
2 ай бұрын
Someone made a video that if we hold the + button for ten seconds displays will show 63 km.. But I didn't do it yet. Cause I don't know what can happens later.
@EuroVenture-up5zp
2 ай бұрын
Sir my cycle stuck 😞 in P8 how to get back normal screen
@kinyo_evo
2 ай бұрын
M20 dual bat. When I go to the advanced settings, on P3 it doesn't let me increase the speed, it always stays at 25 km.. can you help me?
@BRichSolution
2 ай бұрын
Ask engwe for password to unlock the bike
@kinyo_evo
2 ай бұрын
@BRichSolution I can move and change all the menus, except the speed one
@aqua.editzz
2 ай бұрын
@@kinyo_evosame did you fond a solution yet?
@kinyo_evo
2 ай бұрын
Hey, yes, it's finally unlocked
@taladno863
Ай бұрын
@@kinyo_evo How?
@AdamX_pl
27 күн бұрын
See how to unlock the full power of this bike - Enegwe P1 - new models - kzitem.infonNEdpEEmtbk?si=qTPty4NpYOC9yn8C
@BRichSolution
27 күн бұрын
Thanks
@Jaxon_Comer
Жыл бұрын
Hello, im here in Naples, Fl and i was wondering how much you would be willing to sell your fully upgraded RSF650 street bike for. I am very intrested in buying one of these, i just dont have the time to order all the parts and build the bike itself.
@BRichSolution
Жыл бұрын
I sold it 6 months ago someone offered me $1350 for it. I could build another one if needed
@Angel-jr4dv
Ай бұрын
No alarm or key/passcode for this bike?
@BRichSolution
Ай бұрын
Not on this bike. I heard passcode is 1212
@pongphanchareonsri7416
11 ай бұрын
I have a question can you turn down the light of the front totaal down ?
@BRichSolution
11 ай бұрын
The headlight swivels on the bracket so you can adjust the beam down
@pongphanchareonsri7416
10 ай бұрын
Thanks for replaying , But can you turn the lights totally down wil the bike is on
@SILVANO6938
11 ай бұрын
Hello, why in my unit only P0 with 0000 lightening ? thanks
@BRichSolution
11 ай бұрын
Not sure.. can you change it 0000?
@matthewfarrell8413
9 ай бұрын
I think i changed the password setting and now its coming on but is stuck on p8 and when i hold power button and the + its not giving the option to factory reset,??help please
@BRichSolution
9 ай бұрын
See user manual section 3.2 for factory reset myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@EuroVenture-up5zp
2 ай бұрын
Sir I have the same problem now please help
@EuroVenture-up5zp
2 ай бұрын
Please explain me how you come out from P8 I am still stuck 😞😢
@billvarvarigos6459
Жыл бұрын
i face problem with the speed and distance indicator. i am cycling with 39 -45 km/h and shows 0. Engwe send me a new controller but ALL THE SAME. Could anyone help, pls???
@BRichSolution
Жыл бұрын
Interesting. I wonder where it gets the speed from? Its not the cadence sensor on the crank as mine went bad. It must be a signal inside the rear hub motor? What did Engwe say?
@billvarvarigos6459
11 ай бұрын
I don't know probably the sensors are inside the motor... and Engwe is sending me a new motor.... i am waiting 12 days so far... probably it will need 15 days more to wait, the same days as i was waiting the controller that they send me.@@BRichSolution
@jorgeoliveirak5851
Жыл бұрын
How can i turn off the light? Do i need disconect the wires?
@BRichSolution
Жыл бұрын
There is headlight button. Or you referring to small light bar jn head light for safety? If so you can turn off
@ytpcgalaxy
10 ай бұрын
i have a different bike with this same display and it’s stuck on p1 how to i unlock it?
@BRichSolution
10 ай бұрын
Ask seller for unlock code. Try 1212
@ytpcgalaxy
10 ай бұрын
@@BRichSolutionhow to i punch in unlock code?
@ytpcgalaxy
10 ай бұрын
@@BRichSolutionplease reply
@ENORMOSAUREL
7 ай бұрын
Do you have any changes on the throttle ?
@BRichSolution
7 ай бұрын
upgrade throttle - half twist is safer kzitem.info/news/bejne/tWuQzIWQjYJhZ4o
@blu3i
10 ай бұрын
How do I remove the lag when puling the throtal
@BRichSolution
10 ай бұрын
Not sure… maybe one of the settings allows you yo adjust lag. Mine doesn’t have lag. Ask Engwe customer service
@brendanmonkey3599
10 ай бұрын
Why is the battery sign on my display not there?
@BRichSolution
10 ай бұрын
Not sure
@KM_F19
24 күн бұрын
When i turn on there is p8 on password what can to do?
@BRichSolution
24 күн бұрын
Try 1212 if that does not work then as Seller or Engwe
@KM_F19
24 күн бұрын
@@BRichSolution ok thanks
@achiez11
4 ай бұрын
why does mine only go up to p7? I don't have p8
@BRichSolution
4 ай бұрын
Not sure ask seller or manufacturer?
@ugosalvadori7513
Жыл бұрын
Sorry man .. i Didnt know the p8 button .. and maybe clicking no paing attention IV changed the default s password.. how can i do ?? The bike Is blocked on P8 0000
@BRichSolution
Жыл бұрын
My default was password was 1212. You can do a system reset see video to unlock
@ugosalvadori7513
Жыл бұрын
@@BRichSolution thank you so much.. I solved .. Actuallt, in my ignorance, i set the time on the p8.. I rember that was 18:42.. So i out those pass and the e bike unloncked.. I was really scared.. Anyway ,still i cant do the reset.. Hope that i won t Need 🤣
@meeeeu6770
Жыл бұрын
@@BRichSolutionhaw do I do a system.reset because I'm stuck at p8 ? Thanks!!!
@EuroVenture-up5zp
2 ай бұрын
Please help me I have the same problem now 🙏😢
@ziauddin443
3 ай бұрын
Hello P3 is not working it's on 25 not increasing and not reducing
@BRichSolution
3 ай бұрын
reach out to Engwe for solution. Do you have 250W motor or 750W motor?
@Andy-mp5jj
11 күн бұрын
Does anyone know how to fix error 30?
@BRichSolution
11 күн бұрын
E30 is communication error according to manual see link below. Check the connector on the wire harness. Disconnect the connectors and reconnect to ensure they are seated. Did the bike get wet? myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@user-bn5wl7tr7t
11 ай бұрын
I lived in p3, it goes up to 25 km
@BRichSolution
11 ай бұрын
Okay
@hgallegos915
4 ай бұрын
What's Max's mode?
@BRichSolution
4 ай бұрын
Pas mode 5
@Zmaj035
3 ай бұрын
Hi, On my M20 bike i can't change with the +/- the speed limit. Do you maybe know how to resolve this problem?
@BRichSolution
3 ай бұрын
Not sure… contact engwe
@ytpcgalaxy
10 ай бұрын
hello how do i reset this display?
@BRichSolution
10 ай бұрын
See section 3.2 on manual fot reset display myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@chocochicochef
3 ай бұрын
My engwe m20 won't let me increase the maximum speed. because?
@BRichSolution
3 ай бұрын
Do you have 250W or 750w motor? If 750w ask engwe for password
I accidentally left my battery on for a week now my battery indicator doesn’t work
@BRichSolution
6 ай бұрын
Charge full then try it again
@user-bn5wl7tr7t
11 ай бұрын
at p3 it stops 25 km
@BRichSolution
11 ай бұрын
As manufacturer why?
@user-bn5wl7tr7t
11 ай бұрын
I dont now how to hack
@sweptapostle2473
11 ай бұрын
the manual didn't explain any of this and now I'm locked out of my bike...
@BRichSolution
11 ай бұрын
try factory reset outlined at 4:04
@user-rb9fs5mm3g
11 ай бұрын
@@BRichSolution hi I have done the same with p8 setting and don’t know the password
@TheSteve875
10 ай бұрын
@@user-rb9fs5mm3g paswword is 1212
@TheSteve875
10 ай бұрын
1212
@user-qm7yv1fx4v
4 ай бұрын
@@BRichSolution how do you turn the head loght of ? I have held the "light on button for 2 secs ) as instructed but I can't seam to turn them off now😂 I've tried holding the light on button for 2 secs , also tried the light button by the horn ... im stumpped🥴
@stoney2846
2 ай бұрын
I have the same display but mine goes to p19
@BRichSolution
2 ай бұрын
Interesting
@davidinmossy
6 ай бұрын
How do I get it off pedal assist ?
@BRichSolution
6 ай бұрын
Ask Engwe. The manual does not allow for user to configure PAS mode. Maybe disconnect the cadence sensor on the crank from the controller? Full user manual myosuploads3.banggood.com/products/20230321/20230321034539M20.pdf
@davidinmossy
6 ай бұрын
@@BRichSolution Thanks yeah its the same manual you get with the bike.
@davidinmossy
6 ай бұрын
@@BRichSolution I got it working thats it in full throttle mode 😍
@RamiroJunTV
5 ай бұрын
I am still have problem because is still in P1
@BRichSolution
5 ай бұрын
P1 is locked?
@ugosalvadori7513
Жыл бұрын
Please help me
@BRichSolution
Жыл бұрын
What is the issue? Do factory reset by holding power and + button for 3 seconds
@jamesgopro4233
Жыл бұрын
Hello, P6 must be 20. Because of a controller maximum is 20 Ah. At 25 maybe heat your controller.
Пікірлер: 224