New builder. Just did my third kit today. Thank you so much for the tutorial! Much appreciated!
@dingdongchingchong8659
3 ай бұрын
Never seen an aussie/new zealander white guy into in this gunpla hobby. Nice!
@qban228
2 жыл бұрын
Fantastic video ! Straight to the point - thank you for the video !!
@Zeitgeist6
11 ай бұрын
Honestly I never used the eraser marker. Isopropyl alcohol and a cotton bud works just as well. Also for the Tamiya Panel liner. Also NEVER use Tamiya accent color or those Gundam flow type markers on unprimed/non-topcoated ABS plastic (check the runner or booklet to see if it is ABS). It'll shatter if you use too much. Ruined a few models (my poor HMM Liger Zoid 😭for example) like that before I found out what caused it. You can glue it back together but it still sucks.
@TheHambo4
3 жыл бұрын
Good job Adam.
@DeanreyjamesAPONO
2 жыл бұрын
Is it alright to apply the pour type gundam markers directly to the kit with no top coat at all or what so ever? Like apply it directly to bare plastic?
@sven3390
2 жыл бұрын
From what I understand the pour type markers are sace on PS (polystyrene) plastic, but not ABS.
@mdshfi3177
Жыл бұрын
Do i need to do coating before panel lining ?
@vidfreak727
9 ай бұрын
So this is what the real touch markers are for?
@DavidLopez-ep6tv
3 ай бұрын
i dont think those are real touch but rather pour type. real touch markers have white barrels and a marker tip on each end.
@jamescanete6544
Жыл бұрын
Hi kinda new in gunpla building and i stumble upon panel lining, Anyways if i bought a tamiya panel liner, like the one you use in this video, can i use it the freshly bought tamiya panel liner as it is?
@ulrika8198
Жыл бұрын
You could, but Tamiya Panel Liner isn't very recommended on very thin crooks because it eats on the plastic and makes it brittle, so it could break the part of your Gundam. Top coating clear can protect the plastic before panel lining with Tamiya. Personally, I use Micron Sakura pens and Reaper MSP washes to panel line. I'm gonna buy and test the Gundam Marker pour type because it's easier and faster to panel line.
@demenoid13
9 ай бұрын
at 5.35 which exact marker is that?
@mjayson30
11 ай бұрын
What happened to your thumb?
@brandoncrowe1223
2 жыл бұрын
I was under the impression that panel liner should be applied after a gloss coat as to not make the plastic brittle? Excluding the markers.
@vcommandarv5916
2 жыл бұрын
Thats for ABS plastic
@omegacon4
2 жыл бұрын
Panel lining is useful if you want to ruin a perfectly good gundam.
@bokbok1448
Жыл бұрын
weakness disgust me
@omegacon4
Жыл бұрын
@@bokbok1448 Then stop looking in the mirror :)
@MrSuperalan99
Жыл бұрын
mad cause youre bad at it
@omegacon4
Жыл бұрын
@@MrSuperalan99 Reported for immaturity and not having a life.
@robertrichards6964
5 ай бұрын
lol what
@Josh-vh9fw
Жыл бұрын
Gundam markers are trash they make Ur gunpla brittle and snap almost instantly if Ur gonna paint and top coat u might as well use something better then these anyway
@MrSuperalan99
Жыл бұрын
its fine if u topcoat before
@Zeitgeist6
11 ай бұрын
Wrong. The flow type ones and Tamiya Accent color break ABS plastic if you haven't primed/topcoated it, but the normal fine liner ones work just fine on bare plastic.
@Josh-vh9fw
11 ай бұрын
@Zeitgeist6 how was it wrong then buddy u just elaborated on what I said u fool
Пікірлер: 26