Should have watched to the end before commenting! I have used a Wolfcraft version to put in a mortice lock in a door. Worked great.
@Smallbarnworkshop
6 ай бұрын
I think those stops are great for fitting locks / latches etc... Regards JP
@jhenderson4078
3 ай бұрын
I bought this tool - works well. Pretty sure the 2 other white plastic bushings go in the ends of the steel handles so that you don't mar the side of the guide when you tighten them into place - there are little insets in the steel that they fit into perfectly. Just my opinion.
@Smallbarnworkshop
3 ай бұрын
HI. Thanks for the info :-) Regards JP
@josephKEOarthur
6 ай бұрын
🎉just GOT this. Its pretty nice. - it works.
@garyhenderson9303
6 ай бұрын
One of those tools, when you need it, its worth its weight in gold. Two things I was missing was some good options to clamp it down. You could fix some T-Tracks to those corner holes. Also missing is the option to attach it to a saw track to be able to drill a set of holes in a straight line. Can also be done with a jig but for €80 I would prefer more fixing options rather than using one of the motorbike handles. Here it would be great if one of those horseshoe stops could fix to a saw track.
@Smallbarnworkshop
6 ай бұрын
Hi Gary. A track mounting would be a brilliant idea 💡 Regard JP
@paulhodgson4790
6 ай бұрын
There are some cracking tools on Banggood. There is some absolute tosh on there too. I am hearing good stuff about compression router bits from them.
@Smallbarnworkshop
6 ай бұрын
Morning Paul. I will look out for those, I have some points to redeem. Regards JP
@101projects2
6 ай бұрын
There I was only 30 mins ago scrolling through Banggood and AliExpress admiring what appears to look like some good quality well engineered precision tools and then this video pops up 👍 it's sometimes easy to over look or dismiss Chinese brands but actually can be very good.
@Smallbarnworkshop
6 ай бұрын
Hi 101. I’ve bought clamps from there and now had two tools sent, they have all been well built. Regards JP
@Venomator.
6 ай бұрын
Weird coincidence! I have just watched another ‘Toober discussing things they regretted buying and one of those was a drill guide/stand… 👀 Granted, it was nowhere near as competent and flexible as the Banggood one you were demonstrating, which looks a quality piece too… 👍🏻
@Smallbarnworkshop
6 ай бұрын
One of those tools that is fabulous when you need it. Regards JP
@arick_mnc
3 ай бұрын
How much play is in the chuck? I had one from milescraft and hated it because of the wobble on the chuck. i think the defliction at the end of a spade bit was 1 to 2 mm. ok for construction but not if you got it for precise work.
@Smallbarnworkshop
3 ай бұрын
Certainly not a couple of mm but there is a little. Regards JP
@Zamboni-0805
Ай бұрын
It is NOT a drill press, it is a drill guide.
@Smallbarnworkshop
Ай бұрын
He’s NOT the messiah he’s a very naughty boy! Regards JP
@chrisbizak8333
4 ай бұрын
The one I received had a .04" difference in width between the top and bottom of the posts so it will barely go down half way. Lots of oil made no difference. DOA
@Smallbarnworkshop
4 ай бұрын
That's annoying 😑 Regards JP
@M.Elyami
6 ай бұрын
I bought it for about $100, it's junk, when you push down on it it get stuck. No solution for it, couldn't make one cut with it, and the brass inserts keep.coming off, banggood is not responding about it either 😄
@paulwren97
6 ай бұрын
Makes me regret buying the Rutlands version!
@Smallbarnworkshop
6 ай бұрын
Hi Paul. More expensive? Regards JP
@paulwren97
6 ай бұрын
@@Smallbarnworkshop it was £96+7p&p so £103 total and it was discounted. It has no where near the functionality of Enjoy woods, and has some plastic components. However it looks to have longer travel.
@Smallbarnworkshop
6 ай бұрын
Thanks Paul. always good to message tool against its competitors. Regards JP
@paulhodgson4790
6 ай бұрын
@paulwren97 I agree Paul, I bought one about 18 months ago and I'm totally underwhelmed by it. It works, but as you say, none of the added value of the Enjoywood.
@seanmcdonagh4105
2 ай бұрын
say the price sean ireland
@Smallbarnworkshop
2 ай бұрын
This should take you to the page and price. Regards JP www.banggood.com/custlink/vmmHMB7Zb7
@johnmaclauchlan8660
6 ай бұрын
Are the half hole guides actually centre finder stops?
@johnmaclauchlan8660
6 ай бұрын
Should have watched it all before commenting!
@Smallbarnworkshop
6 ай бұрын
Sorry John, I did set you up :-)
@dougwardle2175
6 ай бұрын
I was one of those shouting at you to say those short pins are for centring on a narrower edge😂😂 I’m assuming if you mark for a hole on the board then when it’s set at an angle the bit lines up to the mark. I’ve probably made a right bollocks of describing that🫣😜
@Smallbarnworkshop
6 ай бұрын
Hi Doug. 😂 I think I know what you mean 👍🏻 Regards JP
@karlkjj
6 ай бұрын
Those pins are centre finders
@Smallbarnworkshop
6 ай бұрын
Hi Karl. :-) Regards JP
@arick_mnc
3 ай бұрын
was looking to see if someone had posted already @ the two pins on bottom... definitely not for a "half hole"
Пікірлер: 36