I have just started my build as we speak. Stopped for a video break and this showed up in my feed. I was disappointed it did not have bearings as I assumed it would have unlike the RC10ST I built back in 1993. I was happy to see bearings in my Kyosho Optima re-release along with the belt upgrade. Hopefully I do not strip out pt#6575 like I did on my ST.
@quietrc
2 ай бұрын
It’s just hard to justify lack of bearings being included in kits these days.
@GT500NSX
3 ай бұрын
Love the content and delivery. Fast becoming one of my favorite channels 👍👍
@quietrc
3 ай бұрын
I'll do my best to keep up (or improve) the quality!
@Tzarkyl
3 ай бұрын
i still have my OG RC10T that i bought in the mid 90's it lives forever on my desk, the servo was tapped down but i used something tougher, still holding, notched the rear frame to make room for a clip on motoro heatsink, still running the old gem series diamond 12T double, Novak ESC, grey shocks, and lots of dust
@quietrc
3 ай бұрын
The old Speed Gems are my favorite. Don't know if we'll ever see powder coated cans again for each specific wind.
@UNCLEBGA
3 ай бұрын
I had the Diamond it was an awesome motor. Used it in a Kyosho Outlaw Ultima
@bigdoba317
2 ай бұрын
Same 90s version with slot machine motor;)
@RCACTIONAUSTRALIA
3 ай бұрын
Nice build 😊 Just subscribed my friend. I look forward to building mine this week
@quietrc
3 ай бұрын
Thank you!
@paulwalker3246
3 ай бұрын
Another great video, thanks for the build tips. Hoping mine arrives today.
@quietrc
3 ай бұрын
Hope there's some helpful stuff in there for your build.
@coygtrc
3 ай бұрын
Another great build 👍🤝Can't wait to see the body 😉
@quietrc
3 ай бұрын
Thank you! I have some ideas cooking!
@stevec9704
3 ай бұрын
I have that same brushed reedy motor I bought for a T3 and it’s a good quick motor. I used a 2/1 spectrum brushed esc/receiver and I ran either 7 cell NiH batteries or 2s lipos and that setup I thought was great for the older cars. Much faster than they were originally and fun in the dirt. I sold my T3 and am looking to buy this redo. Thanks
@quietrc
3 ай бұрын
I think the motor will be great. Really looking forward to it.
@MrBonger88
2 ай бұрын
My buddy had an original and his servo was definitely taped down too. I remember only because his servo would move around on the chassis
@quietrc
2 ай бұрын
Yeah, I don’t understand why they went away from a properly mounted servo to tape. Weird.
@LL-wc4wn
3 ай бұрын
Good content 👍
@quietrc
3 ай бұрын
Thanks 👍
@nbensema
3 ай бұрын
nice mine should be waiting for me when I get home from work.
@quietrc
3 ай бұрын
Hopefully you can build it at a more reasonable hour than I did.
@nbensema
3 ай бұрын
@@quietrc Yes thank god I do not have to film it
@donfilippo6620
3 ай бұрын
Some good insights!
@quietrc
3 ай бұрын
Hope they help you out!
@laserbeam1620
3 ай бұрын
I love your channel. I feel like we'd be buddies.
@quietrc
3 ай бұрын
Anybody who loves my channel must be weird like me... so I could see that
@nomusicrc
3 ай бұрын
This is the first time I've seen your hair messed up lol Do you think the drivetrain can take a brushless system What don't you like about the brushed system
@quietrc
3 ай бұрын
I had just wrestled 3 kids through dinner out and then went into the wee hours of the night... just trying to show you I am human after all!
@nomusicrc
3 ай бұрын
@@quietrc do you think the drivetrain can take a brushless system What don't you like about the brushed system
@KevintheTerrible
3 ай бұрын
1:40 A.M. is not really an "All nighter". I would call it "burning the midnight oil." Not that I could stay up all night doing this. I'm too old for that crap. LOL
@quietrc
3 ай бұрын
Video can't edit itself! I wrapped editing at 4:40AM.
@KevintheTerrible
3 ай бұрын
@@quietrc Ohhhh.....I didn't realize you edited it the same night too. I would say that qualifies as an all-nighter. 4:40 A.M. is too late for me.
@quietrc
3 ай бұрын
@@KevintheTerrible Its too late for me, as well. Two days later and I don't feel fully recovered.
Пікірлер: 34