Hey man ! Thanks for the video! I’ve been stuck with the same consistent tear , tried everything ,yoke, spine, rest, timing, grip, I just keep getting the same tear . I knew from other videos this was the only thing left to try … your video gave me the confidence to try. I’m getting great groups with the bow as it is but I’m trying to take it a step further and get my broad heads to group with fieldpoints, at the moment they are just to the right. I’ll be testing results tomorrow and keep adjusting if I need to , took me half an hour to swap the shims. And thanks to the comments I managed to do it without removing the strings cause my timing is set pretty good. So thanks again for taking the time to help others with your video .
@FourFletchArchery
15 күн бұрын
Thanks for the kind words and thanks for watching! 🫡
@MV-ux7wz
5 ай бұрын
Awesome Video brother! Very informative. I have a PSE 3BXL with the same issue, and I'm going to invest in a press and do this myself thanks to your help. You made it look pretty simple, and gave me some confidence. Thanks!
@FourFletchArchery
3 ай бұрын
Thanks for watching! Sorry for the slow response!
@TC-CustomZ-Archery
Жыл бұрын
Not sure why you don’t have more clicks/views in this but this was as simple and precise as it gets man! Nice job man! I appreciate it. 👊🏽
@FourFletchArchery
Жыл бұрын
Thanks for the kind words! I appreciate you watching! 🫡
@harveyrousejr.2069
6 ай бұрын
Great job and I appreciate the fact that you acknowledge you're not a professional. I shoot a Hoyt and it has the shims that require a press in order to remove the axle, however, it pretty simple with the right equipment. Very good video quality.
@FourFletchArchery
6 ай бұрын
Thanks for the kind words and for watching! 🫡
@robertopasquini9776
7 ай бұрын
Thank you man; don't be so modest, you are an excellent teacher!
@FourFletchArchery
7 ай бұрын
I appreciate that! Thanks for watching! 🫡
@gregcrickqld
2 жыл бұрын
Thanks for the video mate, I always take photos of the rig as well before stripping it down to ensure everything goes back the way it should.
@mattsoutdoors7757
2 жыл бұрын
Awsome video. Thank you. My rest sits all the way too the left. WS going to take it too my bow shop so he could do it for me but I found your video and going to try and do it myself.
@FourFletchArchery
2 жыл бұрын
Love it! Best of luck! 👊🏽
@josephdipietro8367
2 жыл бұрын
the peg board is a great idea, nice job buddy
@FourFletchArchery
2 жыл бұрын
Thanks! 👊🏽
@VS-me7ff
2 жыл бұрын
Why take bow all the way down? Just take pressure of string and cables, pop out axle, shift shims, put axle back in and un press limbs and shoot.
@FourFletchArchery
2 жыл бұрын
This is the way I was taught by my peers. If you are able to get the axles out in the press then, by all means, save some time! 💪🏽 Thanks for the comment!
@tools4spoons
8 ай бұрын
Great video. Thanks foe sharing 👍
@FourFletchArchery
8 ай бұрын
Thanks for watching!
@finnishfatman
Жыл бұрын
I have similar tear left on my PSE Evolve 35 that I bought used. Overall the bow is in good condition, but the bottom cam leans left (as in top of it leans left) while the top cam is pretty much straight. I'm about to shim the bottom one and test if I can get both straight and see how it goes.
@pensnut08
2 жыл бұрын
Great video!! Added it to my saved file!
@FourFletchArchery
2 жыл бұрын
Thank you for watching! 👊🏽
@lbtn1
2 жыл бұрын
Great video!! Can you do this keeping the bow in the press?? Just loosening the string??
@FourFletchArchery
2 жыл бұрын
Thanks for commenting. You can do it in the press. I was just taught to break the bow all the way down. It can be down both ways! 👊🏽
@l.dizzle7970
2 жыл бұрын
Super helpful, thank you
@FourFletchArchery
2 жыл бұрын
Thanks for watching! 🤘🏽
@matthewwollmann5803
2 жыл бұрын
Great content…I have a question, did u try yoke tuning with that new system before shimming? I also want to get into working on my own bow.
@FourFletchArchery
2 жыл бұрын
With those yokes you usually only get about a 1/4” max of adjustment. I needed more than that which is why I shimmed. Great question! 👊🏽
@mansalaija
3 ай бұрын
Hi, nice video. I own a 2018 pse expedite and I would like to start tuning my own bow. It will be nice if you could explain why moving the cam to left when seeing a left tear on paper and at the end of the video yo said you had to move your rest because you could still see a little bit of a left tear on paper but you did not say which direction you had to move the rest to and why. Thank you.
@FourFletchArchery
3 ай бұрын
I do all of my paper tuning from 5 yards. The fix for a tail left tear is either move the string to the left or the rest to the right. It would be the exact opposite for a tail right tear or a left handed shooter. I use paper tuning as a close starting point. Then I do a walk back tune to fine tune my center shot. Hope this helps!
@smokingdivot1762
3 ай бұрын
you mention "you knew" the cams needed adjusted. how did you know? what are you looking for to make that determination or what symptoms did you have?
@FourFletchArchery
3 ай бұрын
I shot the bow through paper at about 5 yards. A tear in paper let me know the arrow wasn’t coming out of the bow true. This is when I made the decision to shim cams. Thanks for watching! 🫡
@jons858
6 ай бұрын
For most Pse bows, do you need to purchase shims or should you be able to do what you have to with what’s on the bow?
@FourFletchArchery
6 ай бұрын
Typically, you will just move around what you have. If you are running the newer EZ .220 system you may have to purchase a shim kit with the tool and additional shims. The old washer style you will just swap shims from one side to the other as needed. 🫡
@jons858
6 ай бұрын
@@FourFletchArchery Thanks for the info. Im on the fence of purchasing a gen 1 levitate and cant really find info on shimming. Id like to work on it myself. I know the gen 2 would be easier but it’s easier to find a gen 1.
@FourFletchArchery
6 ай бұрын
You won't be disappointed in the Levitate! @@jons858
@bryangehrcke6080
6 ай бұрын
Appreciate the video!
@FourFletchArchery
6 ай бұрын
Thanks for watching!
@chrismartin5340
Жыл бұрын
Quick question. I am getting a consistent tear right, just opposite of your tear left. Should I move my cams to the right then to see if that helps?
@FourFletchArchery
Жыл бұрын
Correct, for a tail right tear move the cams to the right! 🤙🏽
@chrismartin5340
Жыл бұрын
Do you know of a video on how to do it without removing the limbs? I am scared to death of doing that!@@FourFletchArchery
@HUKIT.
2 жыл бұрын
I’ve been shooting PSE for more than 10 years and in well over 20 bows between target and hunting rigs I’ve never touched a cam.
@FourFletchArchery
2 жыл бұрын
Sounds like you are one of the lucky ones who can run the cams in the dead middle! I always have to shim left for my grip position. Jealous!
@brandonburker7330
2 жыл бұрын
U can do that with the bow in the press and not have to take the string ect off
@DanaSchuett
2 жыл бұрын
Good stuff!
@FourFletchArchery
2 жыл бұрын
I appreciate it so much!
@bassamaticfpv4354
Жыл бұрын
At what point do you decide your cams need adjusted? What to look for on the paper or on our bows that says it’s cams are off ?
@FourFletchArchery
Жыл бұрын
If you are getting a tail left or tail right tear through paper that would be your first indication. If it’s more than a 1/4” out I would shim. Hope this helps!
@TheAnwill
2 жыл бұрын
Still not get brave enough to set my own bow up. Maybe this year.
@FourFletchArchery
2 жыл бұрын
It is intimidating but not as hard as it may seem! I appreciate the comment!
@StraightWayOutdoors
2 жыл бұрын
Nice job. I need this video. I’ve never really had to shim my bows, but it’s always a possibility. How can you really keep from loosing this e-clips? 😂
@FourFletchArchery
2 жыл бұрын
It’s impossible! 🤣 Thanks for reaching out! 🤘🏽
@tonyallen8626
2 жыл бұрын
You did a lot more than you had to, you can leave the bow in the press and the strings on as well. Still love the chanel though.
@FourFletchArchery
2 жыл бұрын
Thanks for sharing! 👊🏽
@halfstep67
2 жыл бұрын
Some presses don't press the 4 individual limbs exactly the same and the axle alignment can be off just a tough making it hard to get the axles holes to line up. This can make it hard to swap out the shims and reinstall the axles without difficulties. I have my own press, a bow-a-constrictor and have done shimming with the bow in the press. Sometimes it can be difficult and I have also done it like he did in the video.
@UltraLimitedHD
Жыл бұрын
Somebody can show you how to remove E clips, without them taking flight. Install wasn't bad but there's an easier method. Basically a small screwdriver to remove, needle nose to install. Videos available on KZitem demoing this.
@FourFletchArchery
3 ай бұрын
Thankfully, the new PSE bows no longer have E clips! Lol. Always a struggle for me. Thanks for watching!
@zacharymitchell7774
Жыл бұрын
Did you move your test to the left or right at the end to clear it up even more?
@FourFletchArchery
3 ай бұрын
So sorry for the slow response. Not sure how I missed your comment. For a right handed shooter you move the rest towards the riser (right) or the string left (shimming cam) to clean up a tail left tear. I would have moved my rest very slightly to the right to clean up! Thanks for watching!
@huntingme
Жыл бұрын
Nice job
@Ganesh.krish0212
2 жыл бұрын
Is shimming the only way to correct lean on PSE’s
@FourFletchArchery
2 жыл бұрын
If you have cam “lean” you would likely correct that through the floating yoke system if you have one of the newer PSEs with the PBTS system. Thanks for watching and I hope that helps! 🤘🏽
@Ganesh.krish0212
2 жыл бұрын
@@FourFletchArchery it’s a PSE citation 40”. So just the floating on this one too ? Thanks , super kool videos
@shonnyabud7975
Жыл бұрын
I just cant put the second pin back on! 😭 im losing my mind!!!
@cavemanprecision7589
2 жыл бұрын
Did you have to shim your evl 34?
@FourFletchArchery
2 жыл бұрын
Yep, I sure did.
@cavemanprecision7589
2 жыл бұрын
@@FourFletchArchery did you do it the same way as your supra?
@FourFletchArchery
2 жыл бұрын
@@cavemanprecision7589 yep, exact same process!
@pickin4you
9 ай бұрын
Now, I have seen video after video talking about shimming cams to tune a broadhead. I, in my 62 years have never had to do that. Now I have not shot the full 62 years of course, but I was an indoor 300 competitive shooter. Also a life long bow Hunter. Just my opinion, but can shimming should not be a thing. There is another issue. Find it and fix that. If it’s your grip, get it right. Also, too many bows without a grip at all, when back in my day they all came with three. You picked the one that for your hand the best and installed that one. We need to get back to interchangeable grips on the bows again. Everyone’s hands are different. So just my input, stop messing with the factory set I’m and find why your broadhead a won’t tune. Maybe just poor broadheads also.
Пікірлер: 69