This application is applied to the Bruder Cat Telehandler carriage tilt ram motor. The SG90 unit usually drives an arm (horn) or lever set onto the output shaft spline, through a number of degrees and in this case 90 degrees. The angle is determined by the PWM (frequency) sent to the driver board. 1000ms = 0deg 1500ms = 45deg 2000ms = 90deg.
- 3 жыл бұрын
Episode 8 Outside The Box...Adapting an SG90 servo driver board to drive N20 motors
- Рет қаралды 120
Пікірлер: 2