Oddly enough phenolic resin is used for aircraft and high performance automotive brake discs because of the incredible heat tolerance.
@Chemsci-j1v
2 жыл бұрын
why is that odd?
@StreuB1
2 жыл бұрын
Trespa is the best. We use it at work by the pallet load. Amazing stuff.
@dialecticalmonist3405
2 жыл бұрын
The barrel says "epoxy phenolic lining". So now I see "epoxy VS phenolic", as if they don't go together. So, what does "epoxy phenolic" mean?
@MeowfaceMusic
2 жыл бұрын
Which is the most resonant? Which would you choose to make marimba bars out of?
@--pbrstreetgang--
Жыл бұрын
I have a bass with a phenolic fingerboard. Is it safe to sand it to restore it. What methods are best for polishing phenol and removing imperfections? Thanks
@kentcook1864
4 жыл бұрын
We have a GREAT new product called Solicor that looks like epoxy but cuts like SPC. Beautiful edges and a clean look. Nice option between the SPC and the epoxy.
@MichaelDavis-cy4ok
4 жыл бұрын
Great video! Question for you: do you happen to know of a way to repair broken poly phenol formaldehyde resin? I have a Carter Thermoquad carburetor from the 1970s with a cracked poly phenol formaldehyde fuel bowl. Previously people would repair this using epoxy resins or JB Weld, but the ethanol and/or other compounds in modern gasoline destroys these materials over weeks or months. The poly phenol itself isn't damaged by the gasoline. If I could use an off-the-shelf product that would cure at normal atmospheric pressure (even if I have to cure it in a toaster oven) that would resist vibration, heat, and modern gasoline as well as the original poly phenol resin does, it would save a lot of time, money and trouble for me, because nobody is making these fuel bowls any more. Do you know of anything that might help me? Thanks.
@seanbrooks9308
3 жыл бұрын
@@MichaelDavis-cy4ok Hey.... Look up Carburetors and More... in Texas... they do Any Kind/Year of Carb repairs, and has You Tube Channel, because they also put on live engine and video it so you can see before and after. I have spoken with the main tech there, and he is like a carburetor whisperer. Their You Tube name - dgrcgrl and you can see atleast videos, along with get their phone number... That would personally be my #1 Choice, Michael.
@MichaelDavis-cy4ok
3 жыл бұрын
@@seanbrooks9308 Thanks! I'll look them up!
@larryt.7913
2 жыл бұрын
Does Solicor have better heat and chemical resistance than standard phenolic resin?
@Bsidesthepoint
3 жыл бұрын
Hello, I was wondering if you can recommend how to cut it and give it a proper finish. I ran into the problem with the finish it always has ridges along the cut edge and as far as time goes to sand it and smooth it out forget about it. please help me!
@DMarq2010
4 жыл бұрын
Very Cool!
@joenovak9366
2 жыл бұрын
I have a sheet of 1/4 inch phenolic and wonder if it can be tapped and if so can coarse thread be used and how strong will it be? Also what is the best way to cut this sheet? Thanks!
@zenjon7892
Жыл бұрын
No sure if you still need the information, but I would suggest cutting it with a diamond concrete saw and drilling it with carbide drill bits (actual carbide, not masonry), then putting threaded expanding anchor inserts in
@joenovak9366
Жыл бұрын
Thanks!
@uzairbilbrey
5 ай бұрын
not sure if you have been solved , what is the usage for yourself or your factory ? if for yourself, it is really a difficult , but for your factory ,you can buy the sheets which are be cutted from the factory
@qball78664
4 жыл бұрын
Subtle Durcon plug at the 2:00 mark.
@oliviaseptiani6752
3 жыл бұрын
hi what heat resistance for phenolic resin?
@uzairbilbrey
5 ай бұрын
120 degree
@envitech02
3 жыл бұрын
Great video! I use phenolic resin quite a bit for my lab furniture projects more than cast epoxy.
@DonDIYProject
Жыл бұрын
How do you cut it?
@envitech02
Жыл бұрын
@@DonDIYProject Hi I order them precut to my exact dimensions and specifications from the manufacturer. If not mistaken, they use diamond saw to cut the sheets.
@DonDIYProject
Жыл бұрын
@envitech02 thank you my friend.
@envitech02
Жыл бұрын
@@DonDIYProject You're most welcome sir.
@blacktalonalan
4 жыл бұрын
You could make a fortune manufacturing Bakelite AK rifle magazines!
@PrinceWesterburg
2 жыл бұрын
How are your teeth whiter than your eyes?!?
@antoncvetkov8602
3 жыл бұрын
how old is this video ? 3 epoxy producers for whole USA, that cant be right ....
Пікірлер: 30