Thank you my friend it solves my problem by locating the white plastic gear inside the paper feed area, I manually roll it with my finger while the printer is powered on..and putting some objects on the top cover sensor.
@dreamsetservices2847
8 ай бұрын
Great, am glad it solved the problem
@HubertOoru
10 ай бұрын
Hi Sir, I am experiencing the same. I have seen your video several times and tried still not able to. I've downloaded the service manual for L1300 and read and came across page 132 where theres some adjustments to be done. I've also seen a few videos that suggested to change the CR motor. I still trust your method will work, but I'm not doing this the right way probably. help me Now
@dreamsetservices2847
10 ай бұрын
Locate the white plastic gear inside the paper feed area, roll it towards you till it can't move anymore
@hernancaceres4961
Ай бұрын
hi,i have a similar problem ,the printer is in fatal error 52H in all sensors (paper jam)
@stephanienicolepablo5351
4 ай бұрын
MAN YOU SAVED MY LIFE!!!!!!!!
@dreamsetservices2847
4 ай бұрын
Am glad it helped
@carlosdelvalle6341
Жыл бұрын
ME SIRVIÓ TAMBIEN, HICE DE TODO Y SOLO TU SOLUCIÓN SIRVIÓ. GRACIAS!
@dreamsetservices2847
Жыл бұрын
You are welcome, am glade it worked for you
@alejandrolao3824
9 ай бұрын
thank you this works for me.
@dreamsetservices2847
9 ай бұрын
Am glad it helped
@lhigwanconstruction7040
Жыл бұрын
Problem solved! Thank you!!!!
@dreamsetservices2847
Жыл бұрын
Welcome, am glad it helped
@Floopwer
2 ай бұрын
Hello the carriage is stuck. I cant move it. Double blinking at the same
@dreamsetservices2847
2 ай бұрын
You need to put your finger into the paper feed area roll the white gear with your finger till it clicks into place, that will clear the error, but you should look inside with a light for any piece of paper stuck in the feed area first
@averythingcrafts3653
11 ай бұрын
super thank you
@dreamsetservices2847
11 ай бұрын
Welcome
@alejandrolao3824
Жыл бұрын
thanks it wroks!!!!
@dreamsetservices2847
Жыл бұрын
Am glad it did
@kyeremehrichard9321
2 жыл бұрын
Please l need help my printer is epson ps 1004 when l decide to print it says incorrect positioning of CD/DVD feed tray with double red light on the printer Can l get ideal of it please
@dreamsetservices2847
2 жыл бұрын
OK its alignment issue,
@kyeremehrichard9321
2 жыл бұрын
Please what should l do
@kyeremehrichard9321
2 жыл бұрын
It can't even pick papers again
@brixlerran3856
Жыл бұрын
Nice one bro
@dreamsetservices2847
11 ай бұрын
Welcome
@manuelzavala463
2 жыл бұрын
excelente solución mi impresora tenia el mismo fallo y ya habia hecho varias limpiezas de encoder, sensor motor y no quedaba le hice el movimiento del carro del papel y ya esta imprimiendo de nuevo excelente video
@dreamsetservices2847
2 жыл бұрын
You are welcome, am glad it helped
@georgereuelsalinas5289
Жыл бұрын
this is the problem of my L1300. i accidentally rotated its roller feeder which resulted to double blinking. and there is a cracking sound everytime i switch it on. the roller must have been disaligned
@dreamsetservices2847
Жыл бұрын
Turn off the printer, then turn on while your hand is on the roller and check If possible spins when the printer initialises
@dooboreearavi1925
Жыл бұрын
Not working still flashing??
@designonline3062
Жыл бұрын
THANX
@Elyutubers
11 күн бұрын
background music too noisy
@maxinealarado9530
Жыл бұрын
Nope did not work for me.
@dreamsetservices2847
Жыл бұрын
Check if the white rail moves freely in your printer
@WMSHOW
Жыл бұрын
*Very thanks your trick is working awesome! But sir after i Off & on printer 🖨 they showing still 2 blinking error? Any solution for this? *
@dreamsetservices2847
Жыл бұрын
Before switching off the printer ensure the gear are readjusted in place, then switch on the printer and co form to me if it happen again
Пікірлер: 37