Excellent detailed instructions! I really appreciate your instructions. My husband used to install and set up my printer, and he just died from cancer. Then, while I was trying to make copies of photos and write his memorial, ink from a NEW cartridge spewed all over the bottom of my printer. Now, I have researched which new printer I will buy, and your video will really help me, an untechie person, to set up my new printer. THANK YOU LOTS!!!
@ResslerMania
Жыл бұрын
Thank you Anne Nelson so very much for watching our video and taking time to comment. We really appreciate that. So sorry for your loss but very happy we could help.
@hottie8974
Жыл бұрын
I just got my ET 3850 today and was apprehensive about setting it up. I always had problems with inkjet printers. I turned you on and followed with you step by step and it has been a pleasure. Thank you so very much. Everything went smooth and was so easy, with your demonstration. Again, Thank you very much. Now, I can finally print out my Divorce papers. Thank you.
@ResslerMania
Жыл бұрын
LOL. Great zinger at the end of your comment. I was not expecting THAT. Anyway, Thank you Cindy Hillbillie so very much for watching our video and taking time to comment. We really appreciate that and we are so glad we could help. Have a GREAT Day.
@AwakeNow007-yz1ug
3 ай бұрын
How long does the ink last in the the ink tanks?Y old one still has ink. Not sure if I need to dump the old ink...
@user-ju9nu8ch9g
Жыл бұрын
I appreciate your detail instruction. It helped me to set up my ET-3850 printer. Thank you so much for your time.
@ResslerMania
Жыл бұрын
Thanks so much for watching and commenting. We really appreciate it. So glad we could help. Have a great day 👍
@gregorymiyata
Жыл бұрын
One last comment is that I am glad you had a couple of glitches--shows us what could and will happen...thanks!!
@ResslerMania
Жыл бұрын
Thank you Gregory Miyata so very much for watching our video and taking time to comment. We really appreciate that. Have a GREAT Day.
@grahamlucy6627
6 ай бұрын
Cool video. I used it in parallel with viewing the product onscreen instructions, and everything installed perfectly.
@ResslerMania
6 ай бұрын
Thank you @grahamlucy6627 so very much for watching our video and taking time to comment. We really appreciate that. So glad we could help. Have a GREAT Day.
@shaniawlfgrl
6 ай бұрын
Great video thank you!! Waiting on my 3850, will come tomorrow. I have one request, please don’t add that horrible music, your voice is pleasant, it’s all we need. Thanks again!!!
@ResslerMania
6 ай бұрын
Thank you @shaniawlfgrl so very much for watching our video and taking time to comment. We really appreciate that. As far as the music is concerned, if you watch some of my earlier videos I do explain that I sometimes have to use the music to help cover up some of the verbalizations my autistic son sometimes makes in the background. People who do not know, have made comments in the past that it sounds like somebody is being beaten. Again, it is only verbalizations but I can understand how it sounds. Nowadays my son does not verbalize in that way as much, so you will see my newer unboxings and setup videos have much less music. Hope this helps explain it and that you now understand. Have a GREAT Day.
@sharangpatil9633
Жыл бұрын
Thanks for posting the detailed setup video. I love your energy.
@ResslerMania
Жыл бұрын
Glad it was helpful! Have a great day.
@strshooter7399
Жыл бұрын
Very nice, very comprehensive, and thorough. 🙂 I'm thinking this might be a solid purchase. Thank you for taking the time to go through the unboxing, and set up. You did right for folks that need a step by step demonstration.
@ResslerMania
Жыл бұрын
Thank you strshooter so very much for watching our video and taking time to comment. We really appreciate that. We try our best to help out whenever possible. Have a GREAT Day.
@ThatLVCguy
Жыл бұрын
Great in-depth instructions. Unboxing was great as well.
@ResslerMania
Жыл бұрын
Thanks so much
@anglin904
8 ай бұрын
Thanks. Ran into couple problems. Step by step video is great👌🏾.
@ResslerMania
8 ай бұрын
Glad it helped
@paullynn1369
9 ай бұрын
Great explanation on set up. Thank you. This made it easy.
@ResslerMania
9 ай бұрын
Thank you @paullynn1369 so very much for watching our video and taking time to comment. We really appreciate that. So glad I could help. Have a GREAT Day.
@HealthyHomeCooking
Жыл бұрын
Very in-depth and well done.
@ResslerMania
Жыл бұрын
Thanks so much
@syj2601
Жыл бұрын
Perfect thank you so much 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@ResslerMania
Жыл бұрын
Thank you SyJ so very much for watching our video and taking time to comment. We really appreciate that. Have a GREAT Day.
@kaybane1748
6 ай бұрын
I love that Video 😍 Can't wait to get my new printer 😊
@ResslerMania
6 ай бұрын
So glad it was helpful. Have a great day.
@marthaleon2468
6 ай бұрын
I really like how Iyou explain everything, I bought mine and I made a serious mistake and I don't know what to do, I set up whit out color inks and now that not print on colors What do you recommend I do? I await your response.
@ResslerMania
3 ай бұрын
Thank you @marthaleon2468 so very much for watching our video and taking time to comment. We really appreciate that. I am sorry that your message somehow got put it my "held for review" tab and I did not see it until now. I hope all was fixed. If not, you should be able to do a factory reset (in the settings menu), and start over. I neither work for Epson, nor am I a tech. I am a purchaser of the printer but I THINK this may help solve your issue. If you got a better answer elsewhere, please reply and let others know what you did to rectify the issue. It may be helpful to others. Thank you and Have a GREAT Day.
@MrPaulus252
8 ай бұрын
Thanks looks easy to set up and lots of ink
@ResslerMania
8 ай бұрын
Thank you @MrPaulus252 so very much for watching our video and taking time to comment. We really appreciate that. Have a GREAT Day.
@AutismTakesOn
Жыл бұрын
Good unboxing and setup
@ResslerMania
Жыл бұрын
Thanks so much
@joepasquale4877
11 ай бұрын
Very informative. Thanks for the detailed review. I currently use a B&W Laser printer for everyday printing and an Epson 1400 Photo printer for color. Both are 10-12 years old so I'm thinking replacing both with the ET-3850. Thanks again for the detailed information. But PLEASE ditch the guitar background music...
@ResslerMania
11 ай бұрын
Glad it was helpful! Mentioning the background music, as a new viewer, you are unaware that I use the music to help cover up the background noise. One of my children is Autistic and he makes noise that could be misinterpreted by people like yourself who are obviously not consistent viewers. Hope that helps with your understanding of why most of my videos have background music. Have a great day
@joepasquale4877
11 ай бұрын
@@ResslerMania No problem with having background music. Most of my KZitem videos also have background music. In fact, selecting the right background music is, for me, the most challenging part of the content creation process. As for the printer... I'm still trying to decide but do appreciate the info you presented. Thanks..
@anfieldroadlayoutintheloft5204
Жыл бұрын
nice vid on channel keep up the good vid thanks lee
@ResslerMania
Жыл бұрын
Thanks so much. I really appreciate it
@Marie-4Him
11 ай бұрын
a question for you. Great detailed video, thank you. I'm curious what you think about the 'maintenance box' that needs to be replaced yearly. I'm planning on getting this printer but just listened to another reviewer mentioning the MB. Wondering if this will be a deal breaker. 🧐🥴
@ResslerMania
11 ай бұрын
Thanks for the question. The maintenance box is around $15 to $20 US dollars, and you only have to replace it when the lid screen tells you to. It is where the extra ink goes when you run a "clean print head" function; which is not very often. Replacing every year is a bit of an exaggeration unless you need to clean the print heads more than the average person. Hope that helps.
@alexmacdonald8394
2 ай бұрын
Install ET 3850 yesterday all OK. This morning it will not print as offline. how do you switch it on line. MAC
@ResslerMania
2 ай бұрын
I am very sorry but I do not have a Mac. I also have no affiliation with EPSON, nor am I a tech. I am a consumer like you, I just videoed my experience and report what I learned. My first thought is to turn off the Mac and the printer. Unplug the printer for 5 to 10 minutes to clear it's memory. Then plug it back in and turn them both on again. Small chance that will work. I will also keep your concern up in hopes a more technical person can better diagnose it. Hope this helps and have a great day 👍
@louisreifsnider8878
Жыл бұрын
Very detailed. Just what I needed. Thanks.
@ResslerMania
Жыл бұрын
So glad the video helped
@adamcturnbull
Жыл бұрын
was hoping soooo much for you to print a few examples. They claim to print photos and I have yet to see ink jets do that.
@ResslerMania
Жыл бұрын
Hi Adam. Thanks for watching and commenting. I really appreciate that. This episode is an unboxing and setup video for the printer. Sorry. I have a lot of videos I have not even edited yet that I have already videoed, so I doubt I will get to a specific photo demonstration any time soon but I will keep it in mind.
@adamcturnbull
Жыл бұрын
@@ResslerMania youve sold me anyway. Just what i want
@ResslerMania
Жыл бұрын
So glad I could help
@paullynn1369
6 ай бұрын
What happens if you select no for wifi because you want to have it hardwired to desktop windows 11?
@ResslerMania
6 ай бұрын
Thanks for watching. From my understanding, you should be fine. I have no affiliation with EPSON but I think I remember seeing it is also "plug and play" if you plug it directly into a PC
@Rovidanana
7 ай бұрын
Can you tell me please if I can print 250 gsm in this print? I’m struggling to know about this, can you please help me?
@ResslerMania
7 ай бұрын
Thanks for your question. If I remember correctly, 250 GSM is about as a good card stock. I do not remember the exact card thickness I used but I did make holiday cards last season with standard card stock and they went through very well. Sorry I could not be more specific but hope this helps.
@Rovidanana
6 ай бұрын
@@ResslerMania ok, thanks anyway for responding. If you use again a card stock, can you please tell me?
@slbynum
Жыл бұрын
What exactly is the purpose of the USB connection? Also, at what point do I disconnect the USB?
@ResslerMania
Жыл бұрын
Thank you Steve Bynum so very much for watching our video and taking time to comment. We really appreciate that. The USB cable is used for different reasons. The most common is if you are on a shared wifi and you do not want to share the printer (like in a college dorm, etc) you can connect it straight to your computer with the USB cable. Hope this helps. Have a GREAT Day.
@brandyferguson123
Жыл бұрын
Does this printer scan double sided documents automatically or does it prompt the user to flip the paper?
@ResslerMania
Жыл бұрын
Thank you Brandy Ferguson so very much for watching our video and taking time to comment. We really appreciate that. Unfortunately, at this price point, printing is the only auto double sided feature. There is no secondary scanner in the lid so you will have to either pay a lot more for that feature or flip the page. Hope this helps. Have a GREAT Day.
@paulsloan4725
Жыл бұрын
Well presented,informative thanks for posting this.
@ResslerMania
Жыл бұрын
Glad it was helpful! Thanks for watching and commenting. I really appreciate that. Have a great day.
@millicentzarate7076
Жыл бұрын
What if the ink was squeezed into the tank… 😬 now there is air. What should we do?
@ResslerMania
Жыл бұрын
Thank you Millicent Zarate so very much for watching our video and taking time to comment. We really appreciate that. If there is too much air in the tank, the ink will not come out and you will probably need to go to a repair center. Now that you know, just don't squeeze the ink fillers and you will be fine. Have a GREAT Day.
@cbale22
Жыл бұрын
i accidentally pressed the ink charge button while there was no ink in it during the very first setup, now I dont know where to re charge the ink. It doesnt print any ink onto it
@ResslerMania
Жыл бұрын
Thank you ceebs so very much for watching our video and taking time to comment. We really appreciate that. I did not have that issue so I do not know how to alleviate the issue but I would assume restarting the setup procedure would take care of the problem. I am simply a consumer just like you and have no ties with Canon so I can't help you troubleshoot. Sorry. Have a GREAT Day.
@cbale22
Жыл бұрын
@@ResslerMania thanks, it works now after many attempts of printing
@jgoetz123
10 ай бұрын
so it said remove all the protective material, and I thought the flimsy clear piece that is around the ink cords, it was open so I tried to pull and then cut it? did I just break it before I can use it?
@ResslerMania
10 ай бұрын
Thanks for watching and commenting. If it is what I think you are asking about, you did not break it, but you may have voided the warranty. This is usually not a big deal because HISTORICALLY, these printers seem to last long after the warranty period in over anyway. Again, if I understand what happened, it is just the cable covering that helps reduce the wear and tear on those cables. It should still work fine, just possibly not last as long as it normally would have. Hope that helps.
@brendastudebaker66
Жыл бұрын
Does this printer print on card stock and is a double sided printer?
@ResslerMania
Жыл бұрын
Thank you brenda studebaker so very much for watching our video and taking time to comment. We really appreciate that. I just tested it out with card stock and it did very well. It does do double sided printing with document printing but the old card maker software I had did not have double sided printing option so I could not test double sided with card stock but it should be able to since it does double sided with regular word document printing. Hope this helps. Have a GREAT Day.
@johnstipic1628
Жыл бұрын
Did I miss the part where you explained how to set up "Remote Printing"? Please someone state the time point on this video.
@ResslerMania
Жыл бұрын
Thank you John Stipic so very much for watching our video and taking time to comment. We really appreciate that. Remote printing is something that is beyond the initial setup of the printer but it is not hard if you follow the directions they give you. Hope this helps. Have a GREAT Day.
@krustycop218
11 ай бұрын
I'm a technological idiot. What password do I have to put in, and where do I find it?
@ResslerMania
11 ай бұрын
You can simply hook it up straight to the computer without having to set up the wireless printing option. However, if you need to print wireless than I assume you are talking about the step where you need your router password. On the bottom of your router, you will see your router's password. It may be called something else like PASSCODE or PASSLINK or such. Hope that helps.
@ZE4MC
Ай бұрын
the phone app wants the printer password WHERE THE HELL DO YOU FIND IT? Worst set up experience ever
@ResslerMania
29 күн бұрын
So sorry you are having difficulties. Perhaps things changed slightly since I purchased the printer, but I showed step-by-step how I set mine up to my home network. When I set mine up through the phone app, the only password I needed was my wifi network password. Following the instructions on the app (as I did in the video) had me up and running without much difficulties. The app never asked me for a printer password, only the network password. Sorry I could not be more help.
@X-OR_
3 ай бұрын
aAåÅ
@ResslerMania
3 ай бұрын
Thank you @X-OR_ so very much for watching our video and taking time to comment. We really appreciate that. Have a GREAT Day.
Пікірлер: 78