How do I reconnect the wires on a wf-2630 when I'm putting the scanner back on the printer
@CanadianDiscountDiva
Жыл бұрын
My paper is not feeding into the printer at all. It catches on the middle (white partial gear looking piece), crinkles the paper and then tries to feed on the right side where the roller is then jams before even entering into the printer. Any ideas? I have tried with regular print paper as well as a thicker paper (card stock). Nothing is inside where the paper feeds, and the parts seem to move freely where the paper feeds. I have the WF-2630
@ruthmcgill1030
2 жыл бұрын
Hi Looking for some help with this printer. It keeps saying paper jam and I have figured out that the paper release catch behind the ink cartridge bed doesn't pop back out. Any help would be grateful. :)
@303electronics
2 жыл бұрын
Hi. Could there be something in the way of the tray?
@lordbow
3 жыл бұрын
Great video. I messed up and disconnected the small ribbon cable that goes behind the printer head cart (the black cart riding along the rail). Is there a way to remove the cart and reinsert the small ribbon cable?
@303electronics
3 жыл бұрын
Hi. This video ashould be able to help you with reataching the wire. I hope it does. Have a great weekend! kzitem.info/news/bejne/jqGPqYpvepWCg6A
@lordbow
3 жыл бұрын
@@303electronics thanks for the link. But I’m that video you leave one ribbon cable connected, which is exactly the one I took off and can’t put back on. I don’t know how I can get it back on.
@lordbow
2 жыл бұрын
@@303electronics I was able to reinsert the small ribbon cable that goes behind the print-head cart. In the video you linked me to, you removed the left panel, exposing a small hole in the metal rail. I pushed the printer-head cart all the way to left and used some eyebrow tweezers to insert the small cable back into its housing. It was difficult but do-able.
@яимойпринтер
2 жыл бұрын
kzitem.info/news/bejne/woCpvGSCmKZzmJw
@bethannrau
9 ай бұрын
Yes, taking off the left panel and one small piece provided a hole just big enough to make it doable to reconnect this wire. Thank you @lordbow for the instructions!
@ravraid
2 жыл бұрын
This sort of video is so useful. It really encourages me to dive in deeper. Thanks!
@MrMike5880
10 ай бұрын
What parts do I need to remove to access the main logic board ?
@juliusdichosa8178
Жыл бұрын
I accidentaly pulled the small wire ribbon behind the printhead along the rail. Any suggestions on how to plug it back in? The space is really tight back there. Any help would be appreciated. Thank you!
@303electronics
Жыл бұрын
Oh no! See this video, it may help. You may need to remove the printhead partially. If the printer is not seeing any error, I would not mess with it. kzitem.info/news/bejne/jqGPqYpvepWCg6A
@alisarahryder8094
Жыл бұрын
Thankyou 🙌 found what I needed x
@jessicachavez3184
2 жыл бұрын
I disconnected the cable that connects the scanner and I don't know how to connect it again...
@303electronics
2 жыл бұрын
There could be a clamp if the wire is not holding in the slot.
@bobbymcaullay9129
Жыл бұрын
Excellent
@303electronics
Жыл бұрын
Thank you! Cheers!
@manumanu-ck4pp
2 жыл бұрын
y como la vuelve a montar??? mi tapa arriba del scaner no entra....
@mixedmeteor
Жыл бұрын
was there an internal battery? my 2630 always asking if I want to reset time and date, why is this always resetting?
Пікірлер: 22