This Video is episode 6 from the EQ Design and Build series.
In This Episode, I have shown the Manufacturing of my EQ platform that was designed for 24deg North Latitude and also how i changed my Drive mechanism from an M12 screw design to a ball bearing lead screw drive for better accuracy.
In Episode 07, we will look at how to measure the actual Achieved latitude of the final assembled equatorial platform and some other factors related to the drive mechanism and different options available.
If you own a nonmotorized or non-GoTo Dobsonian telescope then you might have faced the hassle of adjusting the telescope again and again,
as the target slips away from the sight, breaking your back. Don't break your back, make a equatorial platform for yourself and live in peace
and also venture into initial level of astrophotography with a tracked long exposure photo, off course it will not be as crisp as an German equatorial mount with PHD2 guiding, but you get the point.
Subscribe Astro Indi for more such Videos on Amateur Astronomy.
Follow Astro indi on Instagram:
/ astro_indi
Follow Astro indi on Twitter:
/ astro_indi
Follow Astro indi on KOO:
www.kooapp.com/profile/ASTRO_...
Follow Astro indi on Facebook:
/ 465633974902061
Stepper Motor NEMA23 and Other M12 shaft & Screws were purchased from:
robokits.co.in/
Stepper Motor NEMA17 with 100:1 gearbox is purchased from:
www.ubuy.co.in/
Link To Parts used:
www.amazon.in/gp/product/B07P...
www.amazon.in/gp/product/B00L...
www.amazon.in/gp/product/B08Q...
www.amazon.in/gp/product/B08K...
www.amazon.in/gp/product/B07H...
www.amazon.in/gp/product/B01M...
www.amazon.in/gp/product/B07V...
www.amazon.in/gp/product/B07T...
www.amazon.in/gp/product/B07T...
www.amazon.in/gp/product/B07L...
www.amazon.in/gp/product/B08F...
www.amazon.in/gp/product/B07S...
www.amazon.in/gp/product/B082...
www.amazon.in/gp/product/B079...
www.amazon.in/gp/product/B06X...
www.amazon.in/gp/product/B096...
#Equatorialmount
#astronomy
#manufacturing
#CNCwirecutEDM
#woodworking
#astrophotography
#Equatorialplatform
#amateurastronomy
#diy
#diyprojects
#cad
#3dmodeling
#startracker
Intro: (0:00)
Layout: (0:46)
Cutting: (1:31)
South bearing: (2:13)
Alignment: (3:35)
M12 Screw Drive: (4:15)
Controller: (4:54)
Leveling: (7:16)
First Light: (7:58)
New Ball Screw Drive: (8:23)
Final Assembly with New Drive: (9:53)
Planetary Imaging using This Platform: (14:13)
EP 07 Trailer: (15:54)
Previous Episode:
EP 01: • EQ Platform Build Vide...
EP 02: • EQ Platform Build Vide...
EP 03: • EQ Platform Build Seri...
EP 04: • EQ Platform Build Vide...
EP 05: • EQ Platform Build Seri...
EP 06: • EQ Platform Build Vide...
EP07: • EQ Platform Build Vide...
Audios from:
share.epidemicsound.com/
The video is shot using Canon R6, iPhone 11 & GoPro Hero 10 in 4K.
Негізгі бет Ғылым және технология EQ Platform Build Video Series E06 BUILD and First Light
Пікірлер: 16