For those with a q-revo. Taking the bumper off is a little different (we dont have the front panel on the top). Also our bumper sensors are similar just in slightly different positions. I personally super cleaned in there and used canned air to clean out crevices. I also cleaned all of the sensors and the error stopped for me. I will keep the grinding thing in my back pocket just in case.
@orionroad
2 жыл бұрын
hello. I was in the same situation. and this video solved the problems. I think this method is much better than replacing the bumper sensor. big thank you
@laszloizsaki1709
2 жыл бұрын
this problem can be very annoying I'm glad I could help
@ahmdhlwane7140
2 жыл бұрын
i have this problem but i dont understand what i must sand ??
@remcogiesbertz1577
Жыл бұрын
Thank you for making this video. I was annoyed for over a year with my s5 max. Now it is solved!
@Bcadet00
3 ай бұрын
Worked like a charm! Thank you!
@thomasproehl
Жыл бұрын
Was in this situation too. First test is running now and looks good! Made it with a knipex.
@remcogiesbertz1577
Жыл бұрын
Thanx for this advice. I also did it like this now
@thomasproehl
Жыл бұрын
@@remcogiesbertz1577 Update: Roborock is running without problems since the "fix". But it seems, that he pushes a little bit more against walls.
@Muris82
7 ай бұрын
Top! Deu certo p mim! Obrigado!
@mihailpenev8650
Жыл бұрын
This is solution of the problem!
@ahmdhlwane7140
2 жыл бұрын
can you plz explain exactly what to do i didnt understand what to sand plz?
@laszloizsaki1709
2 жыл бұрын
Grind off 3 millimeters of the two small gray sensors that touch the side of the bumper
@zarulasyraf9972
2 жыл бұрын
Will try it
@budijuwono4424
5 ай бұрын
Klo di aplas bs ga ya
@lanprom
2 жыл бұрын
Does anybody test this ?
@pebbles4855
2 жыл бұрын
Month ago, I had done the same with mine but I used a small knipex clipper and not an angle grinder. That seems a little bit of an overkill. Do it like I did or use a box cutter. Since then I had no error.
@laszloizsaki1709
2 жыл бұрын
Since i did this operation the vacuum works perfectly. An angle grinder seemed to be the most suitable tool for me. But that's not the point, it's the solution to the problem!
Пікірлер: 19