Buy yourself a cheap ultrasonic cleaner, add a few drops of dish soap to hot water and run your rba through it a few times it should take away the machine oil taste. It is how I clean all my vape gear including coils after I have made them. Hope it helps. Nice job on your review.
@toneohm
8 ай бұрын
Hey,, yeah I use to have one but it broke.., that didn't always work either though.. sometimes those machine oil tastes are just too damn strong.,, thank you though, I appreciate it
@user-3D57
10 ай бұрын
Great review Tony ! Sorry about your luck with bad taste. All the best for the holiday season 🎉🎉
@toneohm
10 ай бұрын
thank you ,, you too!
@Tokeokarma123
9 ай бұрын
I was just looking at this one today I got a few new Boro setups. And some clone boros. Dotmobb, Dotshell, and now looking for a few BB style boros. I also like when single decks posts are on the same side...have a blessed New Year's 🎉! Keep vaping 🤙
@zenanarchi6889
10 ай бұрын
Thanks Tone, love the clone reviews! 👏🏻 You’re dead right, too much hype for an average rba 🤔 I’m still rocking my Steamshell, used little else since I got it 🤩 New from Atmizoo it’s only a tad more expensive than an Sxk clone (if you’ve got the pins already) 👍🏻 You seem to be in a better mood…hope things are going better 🙏🏻
@toneohm
10 ай бұрын
I hear good things about that one from everybody., I wonder why the clone is so much more.. 35 is alot for a regular clone
@zenanarchi6889
10 ай бұрын
Can’t recommend it enough 👏🏻 The wicking is phenomenal…I use a 3mm id coil just to get enough cotton in it 😂 For fruit or tobacco juices there’s nothing better, and it’s not too bad with custards 👍🏻 All my other rbas are jealous and sulking on the shelf 😂😂😂
@ntei9964
8 ай бұрын
Which clone is better YFTK or SXK? Sky or Dope rba?
@toneohm
8 ай бұрын
In general.., between those two clone brands.. I prefer SXK.. they are more prominent.. yftk doesn't make many products these days.. they use to be very popular years ago.. And for the rba.., I think the Dope is 10x better than the Skynet, ..imo
@stephendevriesere3020
10 ай бұрын
Thanks for the review Tony
@toneohm
10 ай бұрын
you're very welcome : )
@familyk3644
7 ай бұрын
My favorite for MTL with 1mm - pin
@koriegoss1741
10 ай бұрын
I got a tobeco Kayfun clone from a guy on ecf, a bunch of people raving about how great they were. It tastes like putting a spoon on your tongue. Don't know how others don't get the same taste.
@toneohm
10 ай бұрын
Tobeco?? that's real old school isn't it..? I use to have great luck with clones.. I've had dozens without any issue with taste.. but now, as of the last year or two.. its like a 50/50 chance whether I'm even going to be able to use the damn thing or not.. I just got a few other in recently too and just by smell alone (after cleaning attempts) i can tell they're going to be problematic.. i might have to try n bring this to 3fvape and SXKs attention cause i can't throw the money away anymore
@jeweltom2973
9 ай бұрын
Ahh that was unfortunate. Btw dope is still your best ?
@toneohm
9 ай бұрын
Yeah I don't think it can be beat Lol
@jeweltom2973
9 ай бұрын
@@toneohm thanks haha
@hardedgednb7114
7 ай бұрын
that machine oil taste has been an issue since day 1 of vaping not just with clones I've had authentics with it too. It's nasty trouble is once you've tasted it on a product you can't untaste it
@toneohm
7 ай бұрын
I had a BP Pioneer Insider rba a couple years ago where I was able to get the taste out
@hardedgednb7114
7 ай бұрын
@@toneohm Yeah man. I own one of these myself. I ran it through an ultrasonic and it's o.k. Maybe try that if you can
@Sam_l1f
10 ай бұрын
Thanks Tone. I got one a while ago when they just came out from SXK mine says 030
@toneohm
10 ай бұрын
Thank You so much!! I've always wondered if they individually serialized them.. fun story.., one day, I was watching a Jai Haze live and he said, 'I find out who sent the 502 to China by checking the serial number on a clone cause I know who got what # .., so it made me wonder if China really would keep the same number on it.. guess not! I'm surprised they take the time to change the numbers on them though.. more attention to detail than I'd expect
@jamesm217
10 ай бұрын
Did you try 99% iso alcohol? I usually soak it in hot water with dawn soap, rinse then sit in the 99% iso overnight and that usually does the trick.
@toneohm
10 ай бұрын
yea., I tried it all... thanks though
@JasonStutz
10 ай бұрын
A good ultrasonic cleaner will usually get the oil or old juice taste out of atty's.
@toneohm
10 ай бұрын
Mine broke a while back., but idk I don't think I can get this taste out regardless.. I'm real sensitive to that kind of thing and I tried alot to fix it on this but no luck.. usually one of those things work.. but not this time,, every so often I get a taste that really lingers
@JasonStutz
10 ай бұрын
@@toneohm I get what you’re saying. A while back I bought an Aspire Zero G and the RBA Deck had that WD40 taste and I could never get that out. Any other atty’s I get I automatically clean them and thankfully I haven’t run into this problem again, so far anyway
@فيصلالطويرقي-ت7ج
9 ай бұрын
Tone do you recommend boro mod clone
@toneohm
9 ай бұрын
A clone mod? Which one..,? You can get great deals on authentic used boro mods these days through Facebook for about the same price you would pay for a new clone mod..
@handykawara6440
2 ай бұрын
@@toneohm dude, do you have any recommendation budget rba which have great flavour? i dissapoint in clones, never have luck with them, always problems, do you have any authenthic affordable rbas reccomendation? btw, maybe you could do some kind of video like "best 5 rba under 100$", under 50$, etc..., i think it will help new audience to get into aio scene
@GyomeiHimejima89
10 ай бұрын
I got my sxk skynet clone the other day. It is now shelved. My top cap is so tight it’s stupid and I’m not getting no flavour. I have an authentic wick’d remix’d using the same coil cotton and juice and the flavour I get from that is a damn good vape. The only clone I have that is worth it is the vwm dope I get a really good vape from that mtl and I dare say it’s better than my authentic svoe mesto kayfun bb rba. With the money I’ve spent on clones I’m now stopping and just going to get authentic if I can. I am currently waiting for the next drop for the monarchy scepter which is meant to be amazing. I have a 5avape clone of the mobb v and get nothing from that either which is why I’m going authentic and if I don’t like I can get my money back selling it on
@toneohm
10 ай бұрын
i mean,, the designs are identical.. if it has good flavor.., it should be the same.. clone or not.. UNLESS.., it was done in a sloppy way and has a machine oil taste tainting it.. but a properly done authentic or clone should yield the same results flavor wise.. as for fitment tolerances.. some authentics are done worse than the clones.. but yea, atleast authentics never have that oil taste... (happened to me one time.. with the Pioneer Insider by BP.. but I got a replacement and it was fine)
@GyomeiHimejima89
10 ай бұрын
@@toneohm I don’t know man. It all depends on if it’s a 1:1 clone or close to it. The machining and design has to be on point I would say otherwise you get silly whistling through airflow holes or air breaches in certain parts. The bridges are small enough as it is I’d imagine any small thing out of place or wrong would contribute more to how it vapes. I’m no machinist tho so I cannot clarify. I’m just speaking from my experience with clones. I’ve not yet got an authentic mobb or skynet to compare the differences I feel. The only thing I have is to compare is the wick’d remix’d and the authentic is by far the better vape than the clone. I can’t see any differences when looking at it though so it baffles my mind. I just put it down to machining I just have to in my mind. Unless it’s a pure copy from a 3d file from the authentic company using the same machine and materials then it d imagine there is always that chance it won’t vape the same. As for the skynet the original is done on a certain machine so I’ve read. And it takes ages I don’t think a Chinese company is going to use a 5 axis machine for airflow pins and the bridge itself they will do them on a machine as quick as possible for potential earnings. Vassily takes his time they are all hand polished. Cleaned certain materials used etc etc. it just has to be that
@toneohm
8 ай бұрын
@Redtop1989 feel like your opinions and mine differ.. China is way more capable.. unfortunately, they basically lead the world now with tech and manufacturing.. they definitely have the best tools at their disposal.. and if you watch my live videos, I talk about how the high end companies literally sell their CAD files to China.. so these days.. they often are 1:1 the only difference, is materials.. China uses cheaper grades of metals and plastics.. they can machine really well.. but the quality of metal will not be the same.. and they're not gonna be hand polishing them like a high end modder.. that's really what your paying for.. homage to the designer and a better metal standard.. years ago, some clones were pretty different. Especially rtas.. but these days not so much.. especially with rbas.. too straightforward.. (btw... I never had an rba whistle lol) maybe you mean with an old rda or something.. I get it though.. I'll feel like my authentics of the same atty vape better but honestly, how much of it could be placebo... try em blindfolded and then get back to me ..hah, 3 card monty/atty.. bc the design is the design, is the design.. I mean, it's math.. it's all done precisely with computers n shyt.. it's not like they're hand made with a large degree of variance
@kidsama
9 ай бұрын
up clone
@-trigger357
10 ай бұрын
I've got that taste out of cheap coils also. it is a shame.
@toneohm
10 ай бұрын
Yeah recently I'm noticing this oil taste on damn near every clone I come across.. it's pretty discouraging at this point.. I have an SXK Maven as of the last few months and I was able to get rid of it on that.., these other recent clones.. not so much
@MickDoolan
10 ай бұрын
I use nothing but clones not had this happen odd really
@toneohm
10 ай бұрын
yea i've had it happen maybe 3 or 4 times in the past.., out of many atomizers though., so pretty low odds for it at least
Пікірлер: 41