Good servicing video i enjoyed it bro love the startup sound and humming sound also.. and counterclockwise spin down can't wait to see more of this fan soon.
@JordanU
2 жыл бұрын
Thanks bro I knew you'd like the counterclockwise rotation.
@LemontHill
2 жыл бұрын
@@JordanU Your welcome and yes i do lol
@fordmuscleluis9710
2 жыл бұрын
Good job servicing and repairing this Eskimo box fan not bad considering it runs quietly counterclockwise will always be my favorite direction I really enjoyed it good video bro
@JordanU
2 жыл бұрын
Thanks
@themastergambiarraofc7925
2 жыл бұрын
Its motor is cool and a little similar to the old Arno electric fan motors here in Brazil that were used in TC 16 1C12 circulators and in FAN 16 and fan 12 fans
@JordanU
2 жыл бұрын
OK
@versedbridge4007
Жыл бұрын
Interesting to learn, thanks for letting me know.
@matthew_tran04
2 жыл бұрын
Nice servicing!
@JordanU
2 жыл бұрын
Thanks
@davidzeringuethefanman6292
2 жыл бұрын
Good job bro on servicing it and I also really enjoyed the video
@JordanU
2 жыл бұрын
Thanks
@cdjsteve
2 жыл бұрын
Nice job !!
@JordanU
2 жыл бұрын
Thanks
@adamcool1652
2 жыл бұрын
I love those fans I have one in my bed room
@JordanU
2 жыл бұрын
Thanks for letting me know.
@adamcool1652
2 жыл бұрын
Your welcome
@WednesdayandStrangerThingsfan
2 жыл бұрын
I enjoyed the video
@JordanU
2 жыл бұрын
Thanks for letting me know.
@kevinsykes2002
2 жыл бұрын
Thank you!
@JordanU
2 ай бұрын
You're welcome.
@NorthernMaineProductions
2 жыл бұрын
I have the 1960s Version of this fan ( a 12106) Mine is the aqua Green with the 4 paddle Metal Blade set, mine has thousands of hours of use and rattled real bad when i got it , and yes I agree that noise is very annoying , anyway I oiled it in and around the shaft several times and the rattle would return within an hour or even less of operation, I finally decided to take the motor apart and inspect , what I found was that my fan had been run in a wood working shop or something as the motor was packed full of sawdust , I think the sawdust was effectively absorbing the oil out of the bearings , I cleaned it out completely with a solvent cleaner even the bearings , the oillite Bronze sleeve bearing are Porous and surrounded by felt apparently the pores in the bearings get plugged with sludge after 50 years and will not wick the oil through from the Felt , after I cleaned mine I soaked it with 3n1 Machine Oil and re assembled it and turned it on and in just a short time it rattled again that was back in the winter , I got irritated with it and just set it aside where it sat and soaked for Months , a couple weeks ago I took it out in my garage and put it in the window and have run it many hours over the last week or so and Guess what it does not rattle anymore apparently the Bearings finally flushed themselves out and are properly wicking Oil again
@JordanU
2 ай бұрын
Thanks for letting me know.
@djbrucebanner9882
2 жыл бұрын
i like it
@JordanU
2 жыл бұрын
OK
@1998MonroeNYColonial
2 жыл бұрын
This still seems to be a durable fan despite being cheaply made. Certainly better than today’s crap.
@JordanU
2 жыл бұрын
Anything is better than what we get today.
@1998MonroeNYColonial
2 жыл бұрын
Very true.
@grandtheftauto1233
2 ай бұрын
How’s this fan holding up? Very nice color
@JordanU
2 ай бұрын
OK
@grandtheftauto1233
2 ай бұрын
@@JordanU cool man I enjoy the fan service videos hope to see more soon
@ruthannotto3023
Жыл бұрын
Do you have any extra handles for a 1950 s Eskimo box fan?
@JordanU
Жыл бұрын
No
@HuskyDog88
2 ай бұрын
@@JordanU Try replacing the washers and the bearings, and oiling them all afterwards.
@JordanU
2 ай бұрын
@@HuskyDog88 This is sleeve bearing, there are no replacements available.
@HuskyDog88
2 ай бұрын
@@JordanU Oh, OK. When was this fan made?
@jockoharpo2622
Жыл бұрын
Don't let that be a barber thing. Your hair and no fan grille is an instant scalp king o suave!
@JordanU
Жыл бұрын
You're an idiot.
@PILGRIMM72
Жыл бұрын
What type of oil you use on these?
@JordanU
Жыл бұрын
Zoom Spout or 3-in-1 blue can. Anything lightweight and non-detergent should work.
@Star_Gazing_Coffee_Lover
2 жыл бұрын
Careful of that handle, mine is almost dust and broke easily.
@JordanU
2 жыл бұрын
I figured it would be, but this one has been perfectly preserved. The plastic is strong and pliable still. Must not have spent much time in the window.
@jockoharpo2622
Жыл бұрын
Oil the bearings. You can get bearings for them for about 6 bucks a pair but you have to drill out the pop rivets and bolt in new ones. But think of it this way. YOu won't have to replace them anymore if you keep oil on them. That motor is done. Replacing te bearings won't fix that motor. THe shaft is what's bad inside the bearing sleeve. The shaft cannot e reverssed or it would be able to have one repair. You can't fix that type. It's done. Should have oiled it. Worn bearing sleeves and motor shafts will be easy to take apart. The good ones are the hard ones to take apart. Those squggly washers are in there do keep the amataure from rubbing on the stator coil. IT could lock up against the rotor as well and burn up the motor cause a fire if there is lint and crap inside the fan. Well ship dog. YOu have a zoom oiler. Whey didh't you do that before it went bad.
@JordanU
Жыл бұрын
You're an idiot.
@jockoharpo2622
Жыл бұрын
The reason they don't last is because there are oil ports to keep the motor bearing oiled. If they don't get oiled, they dry from air gbeing blown on them and heat from the summer time. If you look at each end, you will be able to see a slit in te steel and an opening. You use a zoom oiler spout straw and you stick it into those opened divit slots to oil the motor. A little rotation while squeezing the bottle will get the felt sopping wet with oil for future use. As for quality, the older fans had a sleeve bearing. Those have ball bearings. I tihnk they are better tan before with the exception of plastic blades. I don't care for them. They aren't as balanced as aluminum ones.
@JordanU
Жыл бұрын
You're an idiot.
@malibustacy3606
Жыл бұрын
Write it, read it, and then post it.
@JordanU
Жыл бұрын
@@malibustacy3606 Watch all the way through and read the description first as well! Will spare you on many occasions from posting something stupid.
@malibustacy3606
Жыл бұрын
@@JordanU I wasn't referring to you.
@JordanU
Жыл бұрын
@@malibustacy3606 I know, I wasn't referring to you either. It was a generalized statement.
Пікірлер: 57