You can find the complete project details (schematics + source code) on my blog ► RandomNerdTutorials.com/esp32-email-alert-temperature-threshold/
@stevemiller995
4 жыл бұрын
Rui, Hello from the state of Iowa, in the USA. I sure hope you and your family are staying healthy during this time of global pandemic, and I hope you both will continue to prosper with your business and livelihood. I learned much by following your guidance this past winter. Life has taken a turn for now, but I personally appreciate the time and efforts you and your wife have put into your learning series. May God bless You, Your family and your Country always.
@mariohrkac6450
3 жыл бұрын
Is this code compatiblile with ESP 2866?
@lucaavram8838
3 жыл бұрын
Hi, how can I use a DHT11/DHT22 instead of a DS18B20 Sensor?
@leizerleite4457
3 жыл бұрын
Hi teacher Rui Santos! I built a prototype based on your project, I added a humidity and smoke sensor, everything is working fine, very grateful for the opportunity. I only have a problem, sometimes when I turn on the power, the program runs normally, but sometimes it only runs if I press the reset button. Is there anything i can do to make it run the code as soon as it turns on the power, without having to press the reset button?
@joselitojunior8116
3 жыл бұрын
Congratulations! Thanks by post.
@Electronplus-un4ns
5 ай бұрын
Awesome ! Can you please share how to send email to multiple recipients & what changes required in code. Awaiting your earliest response. Thanks & kind regards.
@williamdsp9
9 ай бұрын
Poderia fazer um com envio de e-mail de tensão DC ?
@daveo5067
Жыл бұрын
Is there a way to set a temperature range so I can get an alert if the temperature is not between 16c and 23c. This is to monitor house temperature and alert if there is an issue with the heating system either getting too hot or too cold and needs to have a value between two set points rather than just a single set point. Thanks
@MrREIVAX2
4 жыл бұрын
Hello How difficult have you done, there is another system with another library that simply with a single super short line you do the same
@SuugenRajVenugopal
Жыл бұрын
Hello sir, I want to change the threshold value from a webpage, not in webserver. Is there any way to do it or any examples?
@morpheuz2006
4 жыл бұрын
Muito bom.. obrigado pelos tutoriais...
@RuiSantosdotme
4 жыл бұрын
De nada. Obrigado por assistir
@jadduajones
2 жыл бұрын
Great video! I am able to send an email when my board is connected to computer via USB but how can I get it to send and email when it has no USB connection and is powered from a different source?
@knowurself4999
4 жыл бұрын
How did you dealt with adc being non-linear hence giving false results (temperature data in this case)
@bibekbarman4139
4 жыл бұрын
Sir i have a question? regarding esp8266 webserver
@waleedahmadnabeel
4 жыл бұрын
Amazing work (Y) . Will soon get it to work on my project. Can you explain how can this code be used for 100s of esps running in a single environment? What needs to be changed? It will be a huge help. Thank you.
@RuiSantosdotme
4 жыл бұрын
Hi, I wouldn't use this exact project with dozens of ESPs. I would probably send all the ESP data to a Raspberry Pi that would take care of handling the data and notifications (Node-RED + MQTT)
@yashpratapwar6490
2 жыл бұрын
Thanks a lot, Sir!
@xx-cg8rv
4 жыл бұрын
Please, explain the code. It makes people understand so they dont just copy past it. But good video tho
@RuiSantosdotme
4 жыл бұрын
Thanks for the suggestion, I've decided to write all the code explanation in the blog post! Regards, Rui
@thekiller5739
4 жыл бұрын
i want to control my ledstrip by using bluetooth with my ios smartphone how do i do that
Пікірлер: 27