Hello, I have used your approach; however, I get 400 Bad Request answer from PLIVO. Do you have an idea what might be wrong? Can you help me out, please?
@ViktorKjartansson
4 жыл бұрын
Hi, you have to use https not http when you send to PLIVO
@ahmedayachi2036
4 жыл бұрын
Thanks for this video, the code please :)
@xfarsys
6 жыл бұрын
you should check 10:48 and, thanks for the video
@blazetechnb
3 жыл бұрын
Thank you so much Sir Viktor. One question. How to use that PLIVO??How do i get the code for that??Again,thank you so much!
@mikeharmon8733
4 жыл бұрын
I'm sorry but where is this code posted? At the beginning of your video you post where to buy everything but I do not see a reference to the code anywhere. If I missed that part of the video then I apologize in advance. Also, I would recommend NOT putting your hand in the way of your object of discussion, it's distracting. Great video otherwise.
@ViktorKjartansson
4 жыл бұрын
Thanks for your comment - I agree hands are borgin :-)
@ibrahimyusuf2442
2 жыл бұрын
Thanks Viktor for the time you spent on this project. I got it working in the end but I had to use "esp8266 by esp8266 community v.2.4.2" the exact version you've used. Version 3.x did not work but perhaps I have to give it a go again as there were few minor typos that I had to deal with after that. Will update this in due course. Let me know what later version(s) you've tried since. I am sure you moved on and do some other funky stuff, but hey...Thanks once again.
@ViktorKjartansson
2 жыл бұрын
You're welcome Ibrahim - have to make more videos 🙂
@ViktorKjartansson
4 жыл бұрын
And here is the credentials.h - you must put your credentials here #define WIFI_SSID "YourWIFIName" #define WIFI_PASSWORD "YourWIFIPassword" #define AUTH_ID String("MAZ123456789012345OT") #define AUTH_ID_TOKEN String("MWZlNzI3Y2Qx1234567891234567892MDcx"); #define AUTH_TOKEN String("TUFaMTIzNDU2Nzg5MDEyMzQ1T1Q6TVdabE56STNZMlF4MTIzNDU2Nzg5MTIzNDU2Nzg5Mk1EY3g=") #define FROM_TELEPHONE String("+12019999999") #define TO_TELEPHONE String("+4791999999") #define FINGERPRINT String("11:68:5A:34:9A:28:0D:91:9E:CC:8F:99:59:0A:D4:4A:FF:C5:50:6A")
Just the project im looking for, could you please share the code. Thankx.
@ViktorKjartansson
4 жыл бұрын
Thanks, see the code in comments below
@yazidabdulhamid1349
4 жыл бұрын
@@ViktorKjartansson waiting for the code......
@ericrandall3539
4 жыл бұрын
Just some helpful advice - many people watch KZitem on their phones. You can’t read a thing because your text is SO small. The screen is over half who’re space with some microscopic text. Zoom to what you’re doing.
@raymerritt788
3 жыл бұрын
I'm a novice, well, I really have no clue on how to build what I want. Was wondering if you could give me some advice or even help me build this little project, if possible. I'd be more than happy to pay you for your time. I'm looking to build a very small or very slim wireless/ wifi window sensor. The smallest possible that's activated by a very small magnet. I need the activation to send a signal straight to my cell phone through my home router (without having to manipulate the settings on my router). I can download "homeassistant" or "mylife" or run a small simple phone app. The intent here is not to adjust any setting on my router. I'd like to get at least 75 - 150ft signal to my router. I have a 3d printer and can make a housing for the battery and board...just wondering if this is possible? Any advice would be much appreciated. Thank you for your help.
@ViktorKjartansson
3 жыл бұрын
If you buy these two very small things: SonOff bridge: www.banggood.com/SONOFF-ZBBridge-Smart-Zigbee3_0-Bridge-with-4-SNZB-Sensors-APP-Wireless-Remote-Controller-Smart-Home-Bridge-Work-with-Alexa-Google-Home-Voice-Control-p-1730291.html?rmmds=search&cur_warehouse=CN and SonOff window detector: www.banggood.com/SONOFF-DW2-Wi-Fi-Wireless-Door-or-Window-Sensor-No-Gateway-Required-Support-to-Check-History-Record-on-APP-p-1674773.html?rmmds=detail-left-hotproducts__4&cur_warehouse=CN And install the eWeLink app you get push notifications any time window is open/closed.
@raymerritt788
3 жыл бұрын
Ty Victor. But I want the device to send the signal straight to home router......not Alexa....not googke asstant....straight to my router then to my cell through an app. Also, needs to be smaller than a match box and thin as possible. Great suggestion though..ty
@ViktorKjartansson
3 жыл бұрын
@@raymerritt788 Yes, the bridge is connected directly to your router via WIFI and the app is ready eWeLink
@frodemolland6249
5 жыл бұрын
Hi, possible to use this to get notification when garage door is open?
@ViktorKjartansson
5 жыл бұрын
Sure, the state is open or close
@yawarsaeed6499
4 жыл бұрын
Thanks for sharing such an Awesome project. Can you please share the code for the same. Awaiting your earliest response.
@@ViktorKjartansson Thanks Viktor, you're a good man.
@PrKJTECH
5 жыл бұрын
In India where should I get this bro.
@ViktorKjartansson
5 жыл бұрын
I ordered everything from China: www.banggood.com
@sedanurkocal5190
Жыл бұрын
Hi sir. So we can use normal esp8266 for this project, right?
@junaidhkv4153
3 жыл бұрын
Can you give the magnetic switch Product link for buy
@arniep740
4 жыл бұрын
Is the code available somewhere? Thanks.
@ViktorKjartansson
4 жыл бұрын
Yes, here in comments
@arniep740
4 жыл бұрын
@@ViktorKjartansson I don't see your code anywhere in the comments. Do you have a link to it?
@n1kkri
3 жыл бұрын
Has anyone developed a simple add on current sensor that detects current flow in the door bell wires when the doorbell button is pressed. When it senses the current it will send either a email or text message. Sort of a poor man DIY Ring Door bell for those that already have a camera looking at their front door.
@ViktorKjartansson
3 жыл бұрын
Yes, now you can buy such buttons and put them instead of your doorbell - then they send (via zigbee or RF) signal to main station which can then send the signal to MQTT server which anybody can listen too - then you get the signal you can send sms/email/push or do what you want. www.banggood.com/5pcs-SONOFF-SNZB-01-ZB-Wireless-Switch-Mini-Size-Link-ZB-Bridge-with-WiFi-Devices-Make-Them-Smarter-via-eWeLink-APP-IFTTT-p-1741713.html?rmmds=search&cur_warehouse=CN
@n1kkri
3 жыл бұрын
@@ViktorKjartansson What's the total cost to do this project with ZB Bridge (I have no experience with this) vs. buying a Ring 3 currently selling for $139 sale ? I was hoping for a simpler approach. Add device to doorbell chime with connection either using a small current probe onto one of the wires, or small reed switch placed near the chime solenoid or other method. The device connects to my wifi and sends either email or text without requiring any additional fees.
@n1kkri
3 жыл бұрын
@@ViktorKjartansson I was looking for a product already built and cheap. Current probe goes on a wire and when it senses a change in current flow it will send a text message. Not something to replace doorbell button.
@n1kkri
3 жыл бұрын
@@ViktorKjartansson I am not familar with ZB devices but I believe they rely on additional hardware to send text message. I am looking for a simple stand alone device.
@n1kkri
3 жыл бұрын
I just tried following your steps to load the software for adruino. I don't have a board yet but thought I could learn how you load in a file into the program to look at it. I got lost at 7:16 (Open Detector) where do I find that?
@paulcowley3786
4 жыл бұрын
sorry Viktor, i see no code,please help. Thankx
@stevenoltay
4 жыл бұрын
Why have you not shared the code?....
@MaxGoddur
5 жыл бұрын
Is there a method for sending an SMS text message without using third-party websites as in IFTTT or the one you used. Would like to keep the message sent and received within the LAN.
@captainahab8444
3 ай бұрын
There is. Use an email server to send the text message. You can send text messages from any email
@MrBobWareham
4 жыл бұрын
Sounds like you are so bored with what you are doing so disinterested
why do you need a breadboard? can't you connect it directly?
@ViktorKjartansson
4 жыл бұрын
Just to make it easier
@root8able
4 жыл бұрын
@@ViktorKjartansson ah ok thx
@michaelcarroll4832
3 жыл бұрын
Hi Viktor; What is the name of the USB cable to the ESP 8266 called? Where can I purchase it? Thanks;Mike
@ViktorKjartansson
3 жыл бұрын
Hi, its called micro usb cable like here www.amazon.com/XIAE-Braided-Charging-Aluminum-More-Black/dp/B088GVSFWZ/ref=sr_1_3?crid=C02G6TONBCI8&dchild=1&keywords=micro+usb+cable&qid=1620957998&sprefix=micro+usb%2Caps%2C243&sr=8-3
@michaelcarroll4832
3 жыл бұрын
@@ViktorKjartansson Thank you for your reply. I appreciate your response and your video.
@michaelcarroll4832
3 жыл бұрын
@@ViktorKjartansson Do you have videos on the ESP32? What manufacture (Please send a link) do you recommend for development and what you have used ? There are so many cb out there. !! Do you prefer the ESP 8266 or ESP 32? Thanks again for your responses. !! :)
@ViktorKjartansson
3 жыл бұрын
@@michaelcarroll4832 Hi, the ESP32 is little more powerful so i would recommend it
Пікірлер: 70