Click for more info and reviews of this Lippert RV Slide Out Parts:
www.etrailer.c...
Check out some similar RV Slide Out Parts options:
www.etrailer.c...
Click for more info and reviews of this Lippert RV Slide Out Parts:
www.etrailer.c...
Check out some similar RV Slide Out Parts options:
www.etrailer.c...
Click for more info and reviews of this Lippert RV Slide Out Parts:
www.etrailer.c...
Check out some similar RV Slide Out Parts options:
www.etrailer.c...
Search for other popular Grand Design Reflection Fifth Wheel parts and accessories:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Kevin Hey guys, Kevin here with etrailer. And today I'm gonna be showing you how to replace your worn out gear pack for your slide out on your 2019 Grand Design Reflection Fifth Wheel Trailer. If you're having issues with your slide out not really wanting to come all the way out or come back in. Maybe one side's kind of starting to come out more than the other, might be a good time to get down there and look at your gear packs. Your gear pack has a crown gear in the center of it which has teeth in it and that's what actually kind of helps move your slide out in and out. Those gears get chewed up too much then you're not gonna be able to have your slide out actually move forward or back.
Here's what our gear pack is gonna look like once it's installed. We have our two rollers which are gonna ride along our arm here, and our crown gear which is actually gonna bite into the teeth on our arm and force our slide out to move in and out. As far as installation goes swapping at your gear pack can be super simple. The only thing you may run into some issues with is just a seized up bracket, just because sometimes over all the years, all that usage, that bracket can kind of get gunked up and really wanna stick to the mounting brackets on our frame. So you may have a little bit of issue trying to break that off, but shouldn't be too bad.
One of the things with this is in the instruction manual they tell you to place your slide out about halfway out. I feel like that's a little bit too much. I'd say anywhere from like a third to a half would probably be better, just so you don't have as much tension coming out because as this bar comes out, it's leaning all that weight more towards the outside which is pushing down on our gear pack here. If we have a little bit more in I wouldn't have had as much tension on here it would've been easier to swap out. Now that we've gone over some of the features of our gear pack, let me show you how I installed it.
The first thing you're gonna need to do before picking out your gear pack is to actually measure the arm. Once we measure our arm we'll have three choices of gear packs to choose from. We're gonna have a two by two, a two and a half by two and a half, or our two by three and three by three gear pack. To measure that, we're just going to take our tape measure up and looks like our arm is two inches by two inches so we know that we need the two by two gear pack. Just to give you a little bit of a reference I have our two by two and then our two and a half by two and a half.
Now on our two by two, there are spaces for our roll pens but they do not come included. On our two and a half by two and a half and two by three and three by three gear pack we do come with these roll pens and these are important because that's how you can attach to your room bar, which will go between your gear pack on both sides of your slide out. I'm gonna start by disconnecting my room bar. I'm gonna set that aside because we're gonna put that back in once we replace our gear pack. Typically, your room bar can kind of collapse into itself. I just noticed cause I was having some issues getting it off. It's actually been welded. So our inner piece of our room bar and our outer piece are welded together. So this isn't gonna collapse at all. Which, not a problem. We can still get our gear pack out without having to collapse us in but it does help a little bit getting it off if that's not in your way. Now we can go ahead and we're just gonna break these bolts off here. Just get off my hand. All right, now we can start to pop our bolts out. We may need to use just a rubber mallet to get this out just cause this got a little bit of tension on it just from use over time and it's kind of gunked up a little bit so we'll grab our rubber mal
Негізгі бет etrailer | Lippert Slide-Out Gear Pack Installation - 2019 Grand Design Reflection Fifth Wheel
Пікірлер: 1