Click for more info and reviews of this PTC Cabin Air Filter:
www.etrailer.c...
www.etrailer.com
Don’t forget to subscribe!
/ etrailertv
Full transcript: www.etrailer.c...
Clayton: Hey guys, how's it going Clayton here at etrailer.com. Today I have a 2019 Chevy Tahoe, and I'll be showing you how to install a PTC cabin air filter. Our new filter is going to be constructed of a white media particulate, it does have pleats. What these pleats are going to do is they're going to trap any dirt and debris coming through your air box. This is going to make the air a lot cleaner for you and your passengers.In my right hand is our old filter and in my left hand is our new filter. As you can see, there's a lot of dirt and debris inside our pleats, and what this is going to do is it's going to make our air box work a lot harder, so our AC unit is going to be stressed over time.
It's a good idea to change these out regularly. Personally, I do mine every couple oil changes. It's just part of that routine maintenance that's very simple to do at home, and there's no need to take your car somewhere and pay somebody to do this. This filter is going to block 90% of any contaminants coming through our air.Now that I've gone over some of the features with you, I'll show you how to get it installed on your Tahoe. To begin our installation, we're going to open our glove box.
With our glove box open, there's going to be a glove box release here on the right side, you're going to push it in and pull down. Then our glove box is released. With our glove box catch release off, we'll pinch in on our glove box with tension on the sides, and your glove box will fall down. So there's going to be six Torx bits. I have gone ahead and removed the four down here, and there'll be two up here in the corners.
These are a T-15 Torx bit. With our Torx bits removed, we can go ahead and pull out our access panel. Then the glove box releases right here, you want to make sure that that comes through this panel when you remove it.And then behind her access panel here is our cabin air filter box, we can go ahead and take this off. There's a couple of push tabs on the top, or pull tabs I should say, and you'll pull those down. That last one can be kind of hard to get your hand into, so you have to work your hand around, then we can pull our cover off.
And then we want to make sure we're looking at which direction our airflow is going to go, and as you can see right here, it says airflow down, so we want to make sure we install our new filter the same way. Can be kind of hard to get your finger in there. You can use a pick or a small flathead screwdriver if you can't quite get your hand in. We'll take this out carefully, set this aside and install our new filter.So now we can install our new filter. We want to make sure that our airflow is pointed the right direction, or the same direction as we took it out. And it is, so we can go ahead and slide our filter back into our box. It's kind of hard to line up because it is dark back here, but you can push the filter all the way back, make sure it's seated completely, and then you can put your cover back on and all your hardware in the reverse order that we took it out. So, with our air filter installed and our glove box closed, you're ready to hit the road. That's going to do it for our look at and installation of a PTC cabin air filter on a 2019 Chevy Tahoe.
Негізгі бет etrailer | PTC Custom Fit Cabin Air Filter Installation - 2019 Chevrolet Tahoe
No video
Пікірлер: 1