Just to let you know for authenticity sakes your grey splitter is backwards. You push the button forward to grab half a gear. Aka direct. Then you pull it back to come back indirect just as you go to grab your next whole gear . Then process repeats itself.
@TheHuskyGT
8 жыл бұрын
I am genuinely jealous. Hope you got this thing ready for February next year!
@roadkingdw1
8 жыл бұрын
I plan on working on it again, when I get it turned around I can do a video on all the parts and wiring.
@Mvp-AngelOfGod
8 жыл бұрын
awesome
@pyroheaven9445
8 жыл бұрын
+roadkingdw1 if you start playing again, do you play in ets or in ats?
@Soryueva02
8 жыл бұрын
+roadkingdw1 GREAT!!!! please make a DIY Video.....
@brianhennen445
7 жыл бұрын
How much for one of those
@southlawofficial
7 жыл бұрын
roadkingdw1 Man, the thought of all that money that you had to use to get all of that. I wish I had something like that but I ain't got the money for it.
@PeterbiltTiLoup
9 жыл бұрын
man i hate to say this but you got the grey splitter wrong the LO is back then when you push it forward it engage HI, on the other hand i'd love to see how you got the micro switches setup for the shifter !
@ComdrStew
9 жыл бұрын
+AcadianSkull LOL I was just getting ready to type this.
@alfredo3895
9 жыл бұрын
132nd .Stewart ;)
@dixiemay1996
8 жыл бұрын
Splitter is backwards but other than that, terrific job! Well done 10-10 to ya
@smackhead4104
7 жыл бұрын
that engine startup sounds so nice with my sub woofer
@roadkingdw1
8 жыл бұрын
The music is from a cd "road music" song is Freightliner fever
@Iamthenick727
4 жыл бұрын
Hey buddy what material was used to make the dash please? plywood? mdf? or something else?
@BatMan9482
8 жыл бұрын
Man, I want to do something like that. Nice setup!
@krisraps
9 жыл бұрын
And then you fell in love with racing games........
@c4rbur4tor33
8 жыл бұрын
A Trucker hates racing games! A Bus driver hates trucker games! And a car driver loves Trucker and Bus driver. So they build Bus, Truck and Car SImulator.
@terrancewoods4892
8 жыл бұрын
🚌 are for 👧 John Force was a trucker among other great drivers
@terrancewoods4892
8 жыл бұрын
🚌 are for 👧 John Force was a trucker among other great drivers
@your_average_cultured_dude
5 жыл бұрын
@@c4rbur4tor33 I love both racing and trucking so stfu.
@Iceroadlegend
8 жыл бұрын
Hello, Just wondering how you wired the buttons from the Gear shifter to your 220 board? Did you have to wire them first to a rocket switch or just straight to the board. Also what kind of wires did you use to connect them?
@wlcmetomcyds
9 жыл бұрын
Hi, what switch did you use for the parking brake?
@mewdoesmc720
7 жыл бұрын
when that driving life is strong 😂😂
@neonhomer
8 жыл бұрын
How did you convert the Eaton shifter knob to electric control? I've though about doing something similar, but using a slave valve and pneumatic actuators on micro switches.
@RedSliceGaming34
8 жыл бұрын
Need to make a DIY tutorial for this I'd like to build something like this for American Truck Simulator
@jurassicjeeper1996
7 жыл бұрын
oh man that sick! one question what switches did you use for the air and parking brake? i love to do the key switch too but no idea how to haha
@turborunner
8 жыл бұрын
Hi, awesome cockpit, are you able to share how you made the eaton shifter work as an electric controller? I have a eaton RHD knob and would like to convert it and use it in ats. Would like to know what microswitches you used and how you mounted it in the knob to use the original switch knobs (Pictures would be helpful)? thanks for your reply
@Pugragger
9 жыл бұрын
nice setup mate, are you using xpadder to simulate commands or did u write your own program?
@oli4004
3 жыл бұрын
What adapter did you use for the shifter? I have both the th8a and the shifter knob but they don’t fit together
@cubizme
9 жыл бұрын
Awsome, best cockpit of ets2 I've ever known
@pyroheaven9445
8 жыл бұрын
hey +roadkingdw1 i just bought an old Scania \8/ Interior, now i would wire everythink, but is it dangerous if i got no plan from all? could it start burn or overhight? TY
@timberbeastwaco
8 жыл бұрын
I like what you did, when will the plans be made public? any plans for multi screens and FaceTrackNoIR? Mark/Waco
@electricitymachine6401
8 жыл бұрын
How did you get the turn signals to work? Also, what do you use to control the stuff, arduino?
@pontushaggstrom6261
8 жыл бұрын
aww´I want this so baldy! The shifter ís like aww! Best ever!
@logangage8874
7 жыл бұрын
Hi
@stephenmartin3258
8 жыл бұрын
where'd you get the music and how much money was all of the stuff for the cockpit setup
@copixel37
8 жыл бұрын
I'm about to pick up an Eaton Fuller 18 speed shifter and go to an electronic store to get some microswitches any chance you could tell me which switches to get and should I get a USB interface board Exedra
@darrenmckenna5106
7 жыл бұрын
Very nice Rig, now get triple screens and away you go.
@jonathanhutchins
8 жыл бұрын
are the engine sounds made by a vacuum cleaner?
@xgamerbih
7 жыл бұрын
LOL
@shaunh2467
6 жыл бұрын
Probably a Detroit. lol they always sounds like vacuums
@nickvenhovens1234
8 жыл бұрын
Awesome! So i bought an orignal Scania shifter, but can't get the splitters to work. My question is; how did you do that? Thanks.
@roadkingdw1
8 жыл бұрын
Hi, kzitem.info/rock/_GuMFKN8SgRSdBO6vXqrSA. Check these guys out they took all the work out
@franklennoel2347
8 жыл бұрын
you should add a screen for a GPS navigation and a cb radio microphone for ets2mp or atsmp and a controller to change the radio. does the horn work? +roadkingdw1
@umutdegismen
8 жыл бұрын
tell me dude, how does the truck stops when you turn the key off ? i have to turn the key off and then on again to kill the engine :$ do you use arduino or somethink like that ?
@wilhelmusquist1339
9 жыл бұрын
So do you basically wire the buttons and switches to the keyboard and when you press the button and such, it does what the keyboard should do?
@trainstrains1
8 жыл бұрын
+Wilhelmus Quist To build something like this you need a small circuit board such as the Leo Bodnar boards which are used by Flight Sim cockpit builders. The switches are then connected to the board which is then connected to a USB port. The computer thinks it is another keyboard and the switches are keys on a keyboard. Go into ETS2 options and select which function you want each button/switch to do. When you press the button or switch it mimics the function as though you were pushing a button on a keyboard or joystick. Have a look around youtube for wiring the Leo Bodnar boards.
@roadkingdw1
9 жыл бұрын
I found the shift knob on eBay, it don't have a name brand on it so it was less money.
@alexmihalache1
8 жыл бұрын
+roadkingdw1 how can i connect a real steering wheel like yours? does it damage the FFB?
@jekyllgaming99
8 жыл бұрын
+Alex Mihalache only if the steering wheel has a gear-driven ffb, a belt-driven ffb would be fine
@_crg_
8 жыл бұрын
r u ready for a American truck sim
@brooklyndestiny8068
5 жыл бұрын
OK you should post a video on how you actually like that because that is freaking awesome and I want to build one for my husband because he’s really been wanting something like that
@knucklemodding
5 жыл бұрын
Hey, can you tell how you built this and how long this design took?
@Tact1cal450
8 жыл бұрын
Hey bud I know this is an older video, but I am going to be doing a similar setup. I was wondering if we could connect and I could pick your brain a bit?
@terrancewoods4892
8 жыл бұрын
me2 bro
@faultiergamer1
9 жыл бұрын
Hey man. I need a shifter like that for my Logitech G 27. Do you know someone who buids it
@nicholasbuchanan8931
7 жыл бұрын
The overdrive button is wrong, back is direct and forward is overdrive
@jordanray6459
5 жыл бұрын
Nicholas Buchanan ??? You’re right about the direction of the splitter button but it’s low gear and high gear you’re splitting between.
@Nicaestrada505
8 жыл бұрын
You can make a video of the selector of changes, please.
@njunderground82
8 жыл бұрын
Excellent work! I have been building a Kenworth dash setup for ATS, and I am having trouble with the turn signal switch. I wire the components to Desktop Aviator boards, and all the functions of the turn signal switch work (high beams, wipers, ect), EXCEPT for the up/down function of the signals. I am using a Paccar 480791 turn signal switch. Anyone have any ideas why it might not be working?
@joeytheredneck
8 жыл бұрын
how did you build this if i may ask im planning on building one my self
@sheppardpat47
8 жыл бұрын
What is the truck in the video? This is a Kenworth Long right?
@f100storys8
8 жыл бұрын
Peterbilt 389. it's a mix
@f100storys8
8 жыл бұрын
mod*
@stresslessfishing800
8 жыл бұрын
What truck and engine are you using mate
@MorganMechanicMan97F
8 жыл бұрын
how did you get the shifter to work on the thrustmaster
@RoadRunner-yu8cu
5 жыл бұрын
hey man, it doesn't seem like you care to respond to your comments but Amazing job, BEST realistic setup i've seen on YT Yet!!...how much would you sell me that for??
@Moo57.
9 жыл бұрын
Im really jealous,would you ever sell this setup?! I've been dying to have one and honestly dont have the time to build it
@bigchew1513
7 жыл бұрын
where in the world did u find ure red and yellow air brake knobs at?? i have lookd n lookd n cant find any!! great job ne way..
@strudwick1195
6 жыл бұрын
BIGCHEW 151 you can get them on amazone
@Vassilik98
9 жыл бұрын
Hello, nice work. Surely there is much work in it. Would you know me an address where man send eaton fuller gear lever button can buy off? Thank you very much I am sorry for my English, translate it is
@DanxerGOD
4 жыл бұрын
Did you use arduino on this project?
@tonylocklear2112
8 жыл бұрын
how do u make that setup...or buy it from?
@RenatosilvaMinis-Games
7 жыл бұрын
muito top
@herodms4976
8 жыл бұрын
Con ese panel deberías poner mínimo 4 monitores de 40 pulgadas quedaría genial
@thomasmcmullengaming
8 жыл бұрын
there is a way to fix your tach and speed i have a website you need the controller type that you can buy and make those work let me look for it and i will let you know this was my idea i was thinking about doing something like this very good job
@MrConnorTV
8 жыл бұрын
Sooo cool
@FireEMTRescue
9 жыл бұрын
please tell me how to get the parking brake knobs to work, i have some myself and i want a realistic setup.
@roadkingdw1
9 жыл бұрын
I used standard single push pull switch and attached the knobs I bought from ebay, wired to 2120
@FireEMTRescue
9 жыл бұрын
thanks man
@alexroberts3192
8 жыл бұрын
what did you use and how did you build it
@teknogeek1300
7 жыл бұрын
I like your style!
@puss4627
8 жыл бұрын
Sooooo cool setup!
@mrkane1897
8 жыл бұрын
how can i do the indicators (turn signals)!?!
@zpxgamingco7646
8 жыл бұрын
How did you connect different buttons to your pc
@infinitygalaxy2197
3 жыл бұрын
IF you ever figure out how to get the gauges working let us know!
@50ftchrome12
5 жыл бұрын
how u get the key to work and all the switch for in game ?
@ForeverGamingIRL
8 жыл бұрын
How did you do the shifter? Could u link me the stuff i will need? Thanks
@ForeverGamingIRL
8 жыл бұрын
+Twizy123 i know but how did he make it a semi shifter and how did he do wheel
@ForeverGamingIRL
8 жыл бұрын
+Twizy123 i dont see how that works since its a wheel made for a game and u can use a real wheel for it
@ForeverGamingIRL
8 жыл бұрын
ok so i just buy a wheel take the wheel itselff off and put whatever wheel on? so the racing wheels like g27 are made like real wheels? i didnt know that
@ForeverGamingIRL
8 жыл бұрын
can you link me adaptor
@ForeverGamingIRL
8 жыл бұрын
+Twizy123 thanks! Also i wondered if you know how he setup the dash switches and stuff
@sheppardpat47
8 жыл бұрын
Why do you start in LL gear?
@killakilla2418
9 жыл бұрын
Awesome setup
@filipekiss
9 жыл бұрын
Hey, can you point me to direction of how to make the start engine key? Thanks!
@roadkingdw1
9 жыл бұрын
Standard ignition and starter button wired in parallel an connect to one terminal on my model 220 board I purchased from desktop pilot. Hope that helps
@filipekiss
9 жыл бұрын
Yeah, that's great help already! Thanks. :)
@_crg_
8 жыл бұрын
+roadkingdw1 👍
@sheppardpat47
8 жыл бұрын
Hello ! How do you made for the key starter? Thanks
@roadkingdw1
8 жыл бұрын
The key and starter are wired together so the key and button do the same thing. I just turn the key one position and then push the starter button acts as the second key stroke
@sheppardpat47
8 жыл бұрын
roadkingdw1 Aaaah okay I understand better now, thank you!
@williamknisley7894
9 жыл бұрын
hey man is there blueprints or any thing us layman like me can get to bulid this thing or maybe a video
@theamericanfarmer6223
9 жыл бұрын
best one I've seen
@zachster435
8 жыл бұрын
how did you wire the parking brake?
@friasjosh1
7 жыл бұрын
Twizy123
@roadkingdw1
8 жыл бұрын
Can't wait for ate to be released
@intelinde
8 жыл бұрын
buy ?
@mickeywinstead8223
8 жыл бұрын
very nice cockpit
@littleoerni86
8 жыл бұрын
Hi, where can i get the shifter?
@awesomenoah0497
5 жыл бұрын
What would u but do connect everything
@sctcustoms8461
8 жыл бұрын
Like it. Nice
@connerkeller7587
5 жыл бұрын
I'd love to see a new video
@ayen0nymous
4 жыл бұрын
Holy shit. That's crazy
@RailfanAndrew
6 жыл бұрын
How much money was that and how could i build one
@driver6802
3 жыл бұрын
Красавчик!!!
@tommygooding2308
8 жыл бұрын
How do you extend that shifter?
@roadkingdw1
8 жыл бұрын
Threaded rod the Sam size Union to join to stock. Thin wall tubing to cover.
@hiimmarielle5637
7 жыл бұрын
how much money u expense in all of this?
@vanjakukec9863
8 жыл бұрын
where are you get the cokpit
@Kflener79
8 жыл бұрын
do you have blue prints for it
@Iamthenick727
6 жыл бұрын
does anyone sell indicators or one like it please? to work on ets2.
@jessepickett3939
7 жыл бұрын
what I have to do to get one of those
@latiude1000
8 жыл бұрын
It works on your version of the ets 2 64 bit ???
@sheppardpat47
8 жыл бұрын
+Krzysztof Jese yup
@ezrimangar1038
5 жыл бұрын
I need a set up like that,can you build one for me??
@pulsepointresponderspa3984
8 жыл бұрын
how did you make that
@kilito21
9 жыл бұрын
How to convert from aire to electrical shifter???
@roadkingdw1
9 жыл бұрын
MD ML I took the shifter apart and drilled holes to fit micro switches and ran a CAT 5 cable because there is four pair of wire to work with. the shifter hi lo and the splitter interfaces with a 2120 board that sends a pulse like a key stroke to the program. All switched are wired to the same board. when you go to the control you will see the 2220 listed and you can assign all ETS2 functions to any switch. ie flashers= wire from dash flasher switch to 2220 interface board and when you are in ETS2 setup when you set you flasher you just hit enter for the flashers to assign the function and flip the switch on the dash and it will map it.
@roadkingdw1
9 жыл бұрын
There might be an easier way than mine but I took the shifter apart and drill holes to make room for micro switches so when you move the splitter or range button it contacts the micro switch and signal is sent to the 2120
@spikeharvey6464
8 жыл бұрын
roadkingdw1 please please make a vidio about how you made the eaton fuller nob work
@roadkingdw1
8 жыл бұрын
There is a guy selling them for 100 bucks his is made like mine. It's worth it
@trainstrains1
8 жыл бұрын
Do you have a website or what ever for this guy? I've got one already but I'd like to have it working. BTW, what size adapter did you use to lengthen the gear shift?
@OakspiritGames
8 жыл бұрын
if you want an eaton fuller knob get the SKRS from csio.tech csio.tech/product/skrs-official-v01 you could also watch some videos on it. It is the virtual variant of what he used in the video.
@nexogames4819
7 жыл бұрын
Can I buy it? or not :D thx
@SouthernRailPhotography
8 жыл бұрын
what song is this
@quality1mario876
8 жыл бұрын
I THINK U SHOULD LINK WITH ALFREDO. HE AS VIDEOS ON KZitem ALSO
@1snusmatta23
9 жыл бұрын
COOOOOOOOOL
@connerkeller7587
6 жыл бұрын
Gonna do another update
@justintemple1192
6 жыл бұрын
why only one monitor
@marktechgaming4982
6 жыл бұрын
i want to make this how and what do i need
@akke26
5 жыл бұрын
my poor ass watching this like okay wtf thats so cool
Пікірлер: 194