I have a eumic 8mm camera and would like to know what can I get for it
@pietroventrella6683
4 жыл бұрын
Questo cine proiettore, come tutti quelli sella serie "automatic", consente l'inserimento automatico della pellicola, fino all'uscita del secondo rocchetto dentato. Per fare ciò, senza togliere la mascherina, è sufficiente ruotare la leva a fianco dell'obiettivo fino a far coincidere la punta col puntino bianco della mascherina, inserire la pellicola, e, dopo l'uscita, ruotare la leva in senso orario fino a chiudere il pressore della pellicola. This cine projector, like all those of the "automatic" series, allows the automatic insertion of the film, up to the exit of the second toothed spool. To do this, without removing the mask, simply rotate the lever next to the lens until the tip coincides with the white dot of the mask, insert the film, and, after exiting, turn the lever clockwise until close the film presser.
@peterandschakosyoutubechannel
Жыл бұрын
Can this Eumig Projector only play 8mm film ?....how about Super 8 mm film
@vhsmies3990
5 жыл бұрын
🎥👍
@traoreboris6304
2 ай бұрын
Je suis intéressé par le projecteur 8mm
@nicosellmaier1378
6 жыл бұрын
The Problem with Mine is that the Motor which would normally Wind the Film doesnt Spin. Any advice?
@hajnosen
6 жыл бұрын
I just had the same problem with mine. Try open the back cover and make sure that the rubber belt that feed the motion from the motor is correctly placed onto its wheel. That was the problem for me. Ask me more if you don't understand. :)
@radiocontroll3204
5 жыл бұрын
Nico Sellmaier I had the same Problem, the rüber belt was completely molten away so i had to replace it. Bud luckily it is just 6,50€ on EBay.
@zenblack476
4 жыл бұрын
Hey this is great I just acquired one but I think I blew it up when I plugged it in it worked to 1 second then it died I hope I haven destroyed it any advice would be great !
@zenblack476
4 жыл бұрын
240 v in northern Ireland I’ve had it running but it’s very temperamental there must be a loose wire because she doesn’t seem to want to start up 99 times out of a 100 but not to sure if it would be worth taking it to an electrician
@andrewmcintyre8491
4 жыл бұрын
It's most likely the one of the two paper capacitors inside the unit which shorted and blew up. The first one is across the mains as a suppression cap. I haven't had a decent enough look to determine the function of the second paper cap. It most likely also needs a disassembly and oiling.
@zenblack476
3 жыл бұрын
@@andrewmcintyre8491 thanks for your reply it was very helpful take care
Пікірлер: 14