UPDATE! Used the setup for two outdoor events since the build, each one over 8 hours of continuous high level (but not unrealistic) use and they performed extremely well. I received many compliments on how crisp, clear, loud and deep they are. No issues with power, clipping, protection mode, hookup, rattling, port noise, nada. Amps are cool to the touch even playing dubstep and riddim at 80%+ volume for hours on end (ZLX-15Ps were much warmer but did not overload or have any issues as well). Very happy with the EV products and driver upgrade with Seismic Audio. I am still recommending it personally if it fits your needs etc. The second event we played for a July 4th party and played everything from baby shark, to classic rock, alternative and deep house with fantastic clarity. Again, many compliments. Next use is for an indoor wedding in a very acoustically challenged VFW hall with over 100 people, 40 ft ceilings, concrete walls and floor and about 100' x 350'. I may be adding a set of JBL PRX825Ws for stronger mid-range and coverage. Stay tuned!
@doskoreanitos2588
4 жыл бұрын
Douglas Johnson got a link for these drivers?
@yordanartigas
25 күн бұрын
At what level do you have the etx amp at? Unity or +10?
@markguilaran
4 жыл бұрын
Thanks Douglas for the suggestion. I replaced the woofers with the same SA subs and sounds so much better. Only downside is the grey cone and SA dust cover.
@MrDjanotomus
4 жыл бұрын
Hi Mark, glad to hear this! I ended up spray painting the surface of the cones a matte black which took care of the color mismatch. Just a light coat did the trick and I will be making a custom decal for the caps. The cones had a deep grey/purplish color and it was quite visible through the screen, but now does not.
@hollywoodthedj1673
4 жыл бұрын
Douglas Johnson .. Good Job On Spray Painting The Cone & cap or speaker I didn’t know you could do that pretty dope now no one will know what speaker is in there!👍🏽
@starkie1990
4 жыл бұрын
I was just about to suggest the spray paint..
@halape10
4 жыл бұрын
Finding this has really saved me some money. I blew 2 of my drivers on my ETX. Replacement cost around $346 but I live in Hawaii so shipping can only be sent Fedex 2 days at $375. Seismic saved me some money on the speaker but shipping is still $181 per speaker. So hopefully the $200 savings per speaker is worth it.
@MrDjanotomus
4 жыл бұрын
Hi Halape10, happy to hear that you are going to give them a try. For the price, I still could not be happier with the Seismic New Madrid 18s. You may have to oversize the bolt holes on the basket, just slightly for them to fit however we are still using them strongly today. I encourage you to respond with your feedback once you get them setup! Thanks!
@halape10
4 жыл бұрын
Douglas Johnson I had to do a little cutting on my box to get it to fit. There’s a little funny sound on the really low ends. But, I don’t think anyone will notice. But overall I’m happy with them. I’ll set them up again today to take a listen again.
@FatBoy7.3Powerstroke
4 жыл бұрын
Hey Doug, I just purchased 2 of the ETX 18SP subs last week. You are right, the boxes they come in are definitely made of some heavy duty cardboard and had to use a razor knife to get mine open too, lol. After getting them unboxed and set up, I used the two QSC k12 tops I have here at the house, (The rest of my QSC speakers are in storage) for my first quick test with both of the ETX18SP hooked up. I Gotta say, for a very brief test (Did not want to bother either of my neighbors for very long) I was impressed with the power they produce. Never turned em up past +10 db, but Man they can pump out some serious Thump! However, I can appreciate this video and your recommended Subwoofer upgrade, Cuz I too, Was a bit skeptical of the many reviews mentioning the speakers shutting down after extensive use at higher volume. I'll take a look at Seismic Audio New Madrid 18" drivers, That is definitely an upgrade I will consider. You seem very confident with your experience at large events that demand extended periods at high volumes, and I can appreciate that too. After seeing the magnet on these stock EV speakers in this video, I gotta say they do look thin and weak compared to other Subs I have seen. As for the pair of QSC KW181 Subs I use now, Those are fantastic subs that have truly stood the test of time and are stock from the factory. My entire PA system is active QSC speakers and subs. However, I was looking into expanding the bottom end of my PA system for the bigger outdoor events that seem to really soak up the low frequencies very quickly yand these EV subs caught my attention with the advertised 1800 watt I was presented with a great deal on a new set of these ETX18SP subs I just couldn't turn down. Only paid $2350 for a brand new set with full warranty, and also have an opportunity to purchase two more of these subs and 4 fitted covers for $2496 from the same seller. I think that is a good price considering I see them on Ebay for $1499 each, and the covers are $69 each. The invoice is for 2of the ETX18SP subs for $1150 each and 4 of the ETX18SP covers for $49 each, All brand new with free shipping and full warranty. I can't pass that kinda deal up. I don't like mismatching anything that goes up front for my PA system, but with an 1800 watt rating I can throw a black sheet over them. I'm gonna subscribe to your channel and keep an ear out for any more suggestions you might have. Thanks for the helpful information, I'm always digging around looking for ways to maximize my equipment to get the most out of it that I can
@ItzJcard
4 жыл бұрын
Jason Vied does he have a website?
@FatBoy7.3Powerstroke
4 жыл бұрын
I think so, I found this video about a month ago and pretty sure there was an option to subscribe
@MrDjanotomus
3 жыл бұрын
@@ItzJcard djanotomus.com sorry for the late reply, your comment on another member did not notify me :) Hope all is well! BTW these are still in full production to date with NO issues!
@stevenhammerle
5 жыл бұрын
You should check out the B&C 18TBW100 subwoofer drivers. I think you will be very impressed. They are definitely more powerful than the seismic (respectively) and made in Italy.
@MrDjanotomus
5 жыл бұрын
I think those would be a perfect match for the cabinet!
@hollywoodthedj1673
4 жыл бұрын
Steven Hammerle ... I’m going to look into this speaker I have the etx 18sp’s and they honestly hit hard & drop real low with the EV subs in them minus the peak light coming on super early I love them BUT if I can change the woofer in them so that they can hit and drop twice as low and take high volumes maaaan I am so with it and ready to try it now you say the B&C sub and I heard another mention they put a peavy low Max in the etx cabinets so wich one is better or will both hit hard!
@Deejblackboysxm
4 жыл бұрын
@@hollywoodthedj1673 b&c is better den peavy that’s for sure
@hollywoodthedj1673
4 жыл бұрын
Blackboy Ultimate Sound Sxm ... I wanted to buy the B&C subs at the time they were a little pricey so I went with EMINENCE DEFINIMAX 4018LF: 18 INCH PRO SUBWOOFER they were a little cheaper then B&C plus I only had to buy one since I already had one new in storage!
@zeekhernandez9419
3 жыл бұрын
@@hollywoodthedj1673 I am about to purchase a driver for mine that just blew. Which one you think is best - the Eminence or BC? I want to be able to push as much as possible - and the stock EV will not cut it - but I want the same great sound the sub already has - if not better!!!
@nigel8649
4 жыл бұрын
I bought one 3 years ago and the driver blew up at the third event. They sent me a replacement speaker but I bought a Peavey Lo-Max woofer and put that in instead. No problems ever since, the only issue is that the cabinet weighs 15lbs more. I personally will never risk using anything from seismic.
@MrDjanotomus
4 жыл бұрын
Hi Nigel, I like your choice with the low riders. Great design and price point. I originally bought the Seismic for an inexpensive folded horn replacement so since I had em available, I just popped them in. The subwoofers still continuously work well, but yes are way heavier.
@hollywoodthedj1673
4 жыл бұрын
Nigel .. hey were the peavey low riders an exact match for all the screws to go in I’m having this same issue I want to replace my sub woofers ASAP
@MrDjanotomus
3 жыл бұрын
Hi Nigel, reporting back after some time using these. Still, NO issues and the Seismic drivers are absolutely awesome! Unfortunately, I believe they have since been discontinued... I was also very leery about using SA drivers, but if you had this specific model (I have no liking to any other SA subwoofer) in your hands you can tell it is not their normal design, it was likely a freak production. lol if that makes any sense. Anywho, I hope all is well and they are still treating you well!
@nigel8649
2 жыл бұрын
@@MrDjanotomus My ETX18sp with LOMAX woofer is still killing it, I used it every week (6 years or more) and I have no worries with the LOMAX! The LoRider is not even close to a LOMAX, do not confuse them. The ETX-35sp woofers I used to replace the lame originals were Eminence Ferrites supposed to handle 1500 continuous? I've blown one just yesterday, after several years of use. I won't say it's a fail because I ran sound for bands where they changed the bass output and overdrove the system when I took a piss. The 35sp's are already very heavy, adding 20 more lbs better be worth it, because I'm putting a 15" LOMAX in one tomorrow. Pay attention to your settings, don't overdrive your low end. Easy to do.
@hollywoodthedj1673
Жыл бұрын
@@nigel8649 … the Lomax is eminence brand right? Because I hate the ETX 18sp subs as well and I swapped for eminence definimax 4018LF woofers and that was definitely a hell of a difference
@truthbtold8634
2 жыл бұрын
So I finally got a chance to air my upgraded subs out, I used 4 tops and two subs and still had to turn the subs down, my tops are crossed over @ 100hz and so are the subs, man this upgrade is the bomb. My go to tops are the zlx 15p bt and rcf hd 12 As' the 12 A is a sleeper I like sound quality and coupled with the zlx that can be a little harsh on the upper treble the rcf s' can smooth the frequency out once you get the right blend between the two pairs. Most happy with the butter smooth bass at any level now with no clipping. I can't thank you enough for the idea. Bless you bro. DJ Marvell
@MrDjanotomus
Жыл бұрын
@Truth B Told / DJ Marvell, SO Happy to hear this success! Absolutely love your configurationm I think you have an extremely ideal setup, and now you have new upgraded speakers all over again :) Please keep us posted as time goes on. We will be making a Seismic Audio Upgrade video that will likely stir tons of commotion soon!! lol Cheers!
@djcheko3108
6 ай бұрын
I own a pair of EV ETX 18 my fríen owns the same subs unfortunately he blow out one of his subs so I came across this video and decided to replace the damaged woofer for this seismic audio woofer the same exact the new Madrid and it was so disappointing this sound can’t even compare to the electro voice not even close. The reason we didn’t get the original speaker is because there were none on stock anywhere online
@djgazaaka5000
5 ай бұрын
Wow , how comes he’s not answering to your comment 🤔
@dj_rys09
2 жыл бұрын
Good video have 4 of these subs used 3 times a week for 6 hours. Finally had a driver give out on my box that's 7 years old. Drivers are definitely not the best. My older subs had to re glue them years ago. But ordered 2 eminence drivers curious to test the difference
@truthbtold8634
Жыл бұрын
This is DJ Marvell of One House One Nation DJs I have 2 EKX sp 18s I upgraded the drivers with the Lavoce San 18 4.50 and the performance is next level the amps in these boxes are underrated so the drivers perform excellent these particular drivers are 1.700 watts rms. They cost me .480 bucks but the result is when others are bringing 2 or 3 subs I can get by using 1 or 2 with much cleaner sound even at high levels and for long periods.
@yordanartigas
28 күн бұрын
I replaced it with the new madrid 18 and it does jot sound as load as with the original woofer. Have 2 etx 18sp and had same signal going to them side my side and compare them one at a time. The original woofer hit way harder and there was a noticeable difference in pressure between them
@yordanartigas
26 күн бұрын
I had to put the etx at +10 on the amp to get somewhat the similar spl putput. It goes on temp mode but does not ectuvate temp mode meaning it does not flash temp mode ang go into protectuon mode, so ill have to see in the next few gigs if the amp reduces it by -4db. Question does the amp monitor the speakers temperafure beamcause the amp does not heat up like it does with the original ev woofer but the peak and temp light do come on quick.
@dantonliam
5 жыл бұрын
Ever consider the fact that maybe the EV woofers needed some break in time? I mean...what do you know that the engineers at EV don’t....
@MrDjanotomus
5 жыл бұрын
Hello! Break-in AND Temperature accounted for. For apples, the other Drivers were also not broken in and the difference in sound pressure and quality was completely Night and Day. MFG Suggests roughly 60 Hours to break in, however, the difference will result in a warmer sound. The frequency response and peak power simply was not there. You can read reviews on the drivers themselves and you will get more info about the driver's limitations vs the replacement ones I used. What do I know? I the upgrade sounds and performs much better. I do not claim to be an EV Engineer or smarter than one. I made this video to encourage out of the speaker box thinking if buyers want to challenge the design further, and have fun!
@maguiver1972
5 жыл бұрын
My same thought Everytime I see someone doing this
@rongilbert3231
3 жыл бұрын
I have the ETX 15SP and need to replace the woofer...I hear some kind of cone rubbing on my sub and I’ve only played it a few times at weddings in the last 8 years. I’m sure they are out of warranty.
@MiguelLopez-xh3sg
3 жыл бұрын
Douglas is right, it’s not that engineers don’t know what they’re doing, it’s just that it’s easier to cut quality on a replaceable and upgradable part to keep these cabinets very affordable
@jfingaz9416
3 жыл бұрын
The low end on your subs sounds fantastic in this video! I'm in the same situation but with EV's lighter EKX18SP subwoofer. I need more bass extension as well. All of the drivers I've looked at have a lower sensitivity rating. I don't know if that would give me less overall volume or not. What is the BEST driver that you would suggest I upgrade it with. Doesn't have to be a budget driver, looking for the best options.
@MrDjanotomus
3 жыл бұрын
I would look into some of the B&C or even Eminence drivers. They are all impressive, and I am planning to go in that direction next.
@saintATM
2 жыл бұрын
Do you think EV will update the ETX line anytime soon? It looks like they were released almost 8 years ago now...
@MrDjanotomus
2 жыл бұрын
Hi Allen Mangan! Right? These are literally about to reach 8 years with no revisions and or new release models in sight... These are available and in-stock today for the same price point as all the way back when released. I'm excited to try a new ETX subwoofer, however it does not look like it's going to be released this year... What would you like to see in the new model if they were to release one? :) Maybe as a challenge, we can add that or those features to ours as a concept and see how they perform! Shoot for the sky and let's give it a try!!!!
@vivewolf7980
5 жыл бұрын
Imagine A RCF WOOFER
@MrDjanotomus
5 жыл бұрын
Yes!!!!!!
@vivewolf7980
5 жыл бұрын
Follow up video with a RCF WOOFER?
@MrDjanotomus
5 жыл бұрын
Unfortunately I don't have any around but would love to try it!
@hollywoodthedj1673
4 жыл бұрын
VIVE WOLF .. RCF Woofers Are Probably Exspensive!
@kavajamusic5411
4 жыл бұрын
yes they are, but Faital Pro are better and cost even more
@MrMr123
4 жыл бұрын
I just bought one of these subs, trying to put together a bootleg movie theater for the family when i'm not working in the warehouse. 80' x 25' x 16' H I feel like the larger space requires more woofers or lower frequencies... What do you recommend?
@MrDjanotomus
4 жыл бұрын
The frequency response and price point of these drivers should satisfy most home theater applications. I would focus on the cabinet design and personally I would use 4 for the space (provided dimensions). Perhaps two dual front firing enclosures, and two 2,500 watt amps, frequency 25-125 Khz for starters.
@zeekhernandez9419
3 жыл бұрын
Well there went my driver! I need to replace mine and the EV stocks are about $400 shipped! WOW! I'm trying to find better options - so did you say you had to modify and drill to make these fit the ETX cab?
@MrDjanotomus
3 жыл бұрын
Just the holes in the basket, a couple needed to be rounded out just a little with an oversized bit then they fit like a glove. I am looking into potentially upgrading them to B&C Neos next to take some weight off :)
@zeekhernandez9419
3 жыл бұрын
@@MrDjanotomus wow do know exactly model number and do they fit exact? I'm almost just buying the stock one but would love the handle of the RMS being higher so these things don't blow again. I feel.thats what blew it the first time. I push mine to the edge!!!!
@MrDjanotomus
3 жыл бұрын
@@zeekhernandez9419 great question! With so many options, it comes down to your budget, availability and some trial & error. I love coming across a how-to video that gives me exactly what I need to expect, but the SAs are likely to be discontinued moving forward. If you drive them to the "edge" all the time, then I would get some heavier ferrite subs, like the SA's that can handle more heat, for longer durations of time. Which RMS or Continuously can handle the 1,800W rating of the amps.I was a little skeptical that those tiny amps were really pushing that much power, but a recent event with a HUGE Dubstep headliner (Toadface) we used them as monitors and they even tripped the 20A breaker (testing time) leading me to believe they are consuming and outputting that rating after all. Still, ran for several days at near clip levels, those darn things did not give out.... lol Sorry I may of rambled there, just wanted to share some more recent experience as well. That was last weekend.
@samkaldes103
2 жыл бұрын
Hey man. I have 2 elx35p powered 3 way speakers and I feel the same way you do with the bass...i tried to find the seismic audio Madrid you suggested but in 15" size and couldn't they only come in 18. May i ask if you know if the Madrids come in 15" or only 18? Your description is very convincing and I really want to wake these guys up. Thank you in advance for your time.
@MrDjanotomus
2 жыл бұрын
I believe they only come in 18s and have not been restocked in months.. however I'm confident most higher end low frequency response drivers should yield a similar if not better performance.
@chrisnelson3269
3 жыл бұрын
Please provide a link for the woofers and also. Have you converted your tops yet to better drivers.
@MrDjanotomus
3 жыл бұрын
Hello Chris, the drive is sold out, in fact it sold out just 2 days after the last arrival, these are hot. www.seismicaudiospeakers.com/products/18-inch-raw-subwoofer-driver-speaker And no, we have not replaced the tops yet, no issues with those.
@johnlackner1193
2 жыл бұрын
4 ohm or 8 ohm upgraded drivers? i have some ETX18's and I'm thinking about upgrading to 18 sound 18LW2420 drivers. I always thought the output on these cabinets was coming up a bit short for what they are and now I see why
@SQchico
Жыл бұрын
The original woffer is 4ohm but I think the sa audio woffer only comes in 8ohm.
@yordanartigas
Ай бұрын
Should be fine. The etx18sp at 4ohm is 1800 watts and SA audio is 750 at 8 ohm. So if your amp fro. The etx 18 was 8ohms it would running at 900 watts. A little over the rated spwc for the sa woofer here. @@SQchico
@PerfektSoundLighting
13 күн бұрын
He said they have no output below 140hz 😂😂😂. How do you complain about a speaker you’ve had for a couple of hours. Nothing beats that EV for clean bass output. They’re probably not the loudest but in sound quality not beatable in there price range.
@edub8803
4 жыл бұрын
Nice work... Do they have a hi pass filter for your tops?
@MrDjanotomus
4 жыл бұрын
Hi E Dub! Not exactly, the XLRs are straight through. However, the subwoofer has an excellent built-in DSP which allows fine tuning of the subwoofer which is perfect for most applications. Including but not limited to crossover, input amplification, reverse polarization, cardiod (when using multiple subs), etc. The tops are adjustable too, including a subwoofer setting which alters the bass output to save the grunt work for the bottoms and working the tops less harder. I have to admit, this is great but I could use some more mid, like a kick bin. Therefore, I will be likely investing in some Dual 15s as well to achieve a full range system. Hope this helps and thanks for watching!
@ciprianpavia
5 жыл бұрын
Cool! What is your crossover settings on zlx and the etx?
@MrDjanotomus
4 жыл бұрын
Hi Ciprian, they vary for every event depending on space, music etc... However I have been able to tune them every time to my liking with what's built in. Wish I had a more direct answer for you, sorry!
@TheMcross1
5 жыл бұрын
Hey man I just bought these subs is there anyway you could make a walkthrough video on how to put the new driver in. I just don’t want to take it apart then break something would really appreciate it!!
@MrDjanotomus
5 жыл бұрын
Absolutely, coming very soon because I will be customizing the logo on the driver.
@hollywoodthedj1673
4 жыл бұрын
Douglas Johnson .. can’t wait to see that
@yordanartigas
Ай бұрын
@@MrDjanotomusuodate?
@truthbtold8634
2 жыл бұрын
Bro I agree the drivers in the ETX and the EKX models aren't very good for the quality of amps that come with these subs, the amps are underrated, I have the EKX 18 SP's and upgraded my drivers to the Lavoce' SAN 184.50 drivers and the sound is amazing bro. After the break in period the amps in these really shine and the bass is super punchy and lower being set at 100hz as well. I used the neodymium version of the Lavoces' and basically got the same result, a monster potable sub that I can use just about anywhere, anytime. Thanks for the info. Sincerely: DJ Marvell
@MrDjanotomus
2 жыл бұрын
DJ Marvell, AWESOME!!! I just checked those drivers out and I could only imagine how well those are holding up! Thank you for the feedback and support! I do have a recent update after years of banging those full tilt (well, the DJs did). Both drivers, amps and hardware in near mint condition with the small exception of a crossbar inside the box coming loose. It supports the top and bottom from caving in, I believe. It started rattling at a gig towards the end and was drowned out at higher volume (fortunately). Only 1 of two started this, so I opened both, dabbed a little E6000 on each end, slipped it back in place and drilled a undersized 1/8" hole on both sides from the outside of the box right into the bar and simply inserted two 3" stainless screws and WHOLAH!!! No more rattle and I'm positive that was the weakest point so we're probably good for another 3 years! lol. Cheers!
@truthbtold8634
2 жыл бұрын
Put more screws in my grills put wood glue on the poles inside as well. Thank you bro. I have two Madrids in my home theater. WOW!!!!
@elishasoussan798
3 жыл бұрын
I have a pair of these actually! There awesome, if I were to upgrade, how do you know what woofer is good for it? Like what makes it compatible? I also have the classic Yorkville LS801P subwoofers and they're monsters.
@MrDjanotomus
3 жыл бұрын
Hi Elisha! We had a couple 18" Economy drivers around from a Cerwin Vega Earthquake application to use, so we just gave it a try! Still going strong, no issues at all. We are considering going with some B&C Neo drivers next year to lighten them up a bit. Will share if and when we do :)
@elishasoussan798
3 жыл бұрын
@@MrDjanotomus that's amazing! I really appreciate the quick reply. I found some b&c woofer as well as Blastking. Both 4in Voice coil, my question is, does the wattage of the woofer matter? The b&c is rated at 3400 Watts and the Blastking is at 1800 Watts.
@elishasoussan798
3 жыл бұрын
@@MrDjanotomus also, what size is the voice coil on the standard EV ETX18SP woofers DVX 3180A?
@djdeepkanga1245
4 жыл бұрын
Terrible under 140 hz? Did you mean 40 hz? @6:30
@djhott6004
2 жыл бұрын
Great info, What do you think about P-Audio subs?
@MrDjanotomus
2 жыл бұрын
Hello! We've not worked with those before. Would you have a specific model in mind? We'd def check into it. Thanks!
@MobilediscowirralCoUk
4 жыл бұрын
Alot if speakers do this shame put same drivers in same units! What rms you reckon the etx amp is putting out?
@MrDjanotomus
4 жыл бұрын
Hi Mobile Disco, I am quite impressed with the tiny amp. I would be optimistic to say they are about to put out around 750W continuous, without referencing the data sheets. I am especially impressed with the low power consumption and how cool the amplifier remains even after hours of continuous high level music. So far have not tripped a 15A breaker on these like I have with the Crown amps.
@MobilediscowirralCoUk
4 жыл бұрын
Douglas Johnson not bad at all! Tempted to get 15” used and put better 15” bass driver in neo help the weight so you feel 800/1000watt aes driver be fine as upgrade
@MrDjanotomus
4 жыл бұрын
@@MobilediscowirralCoUk Yes, that would be spot on in my opinion.
@randyrowlett-wm2tb
Жыл бұрын
anyone have the specs for the actual speaker in the ETX sub? The OEM? i want to compare as we plan to replace without having to cut into the cabinet.
@jameswindham2360
5 жыл бұрын
Good afternoon, how can I get in contact with you?
@kylerkiesecker4166
3 жыл бұрын
Im a little upset to see you think the drivers in these are a let down. I have been looking into purchasing one of these subs for a while and it has fantastic reviews. I dont want to purchase a $1500 top of the line sub only to have to swap out the driver... Would you recommend the QSC KS118 over these? Im looking for a sub thats really musical and hits the sweet lows just right. Less concerned about thump.
@MrDjanotomus
3 жыл бұрын
Hi Kyler, the original drivers were a disappointment. Please keep in mind, I bought these at full retail price because I am a firm supporter of this brand and products. I am a Basshead and I dabble in many other applications and projects including car audio. The drivers that come in this cabinet delicate and flimsy. The drivers I had laying around that I put in here are heavier, but also much more heavy duty, and also much more responsive on the lower frequencies. The cabinet, amplifier, casters, pretty much everything else is excellent on the speaker. The front grille can rattle a little bit but that's an easy fix. You will find reviews where people mention the sound degrades over an extended use of high volume. That's because the speakers start to overheat. With the new drivers, this does not happen. I have continuously used these at almost full power for 10 hours at a time. The amplifier remained cool, no kidding. Not even warm. I would buy these again and do the same driver swap before I moved forward to the QSCs because they also have lower quality drivers but higher end cabinets and amplifiers. The QSCs are also more susceptible to be pushed towards the failure point. The EVs have a higher quality protection system in my personal opinion. I hope everything above makes sense, I'm not downing any of these other solutions but I'm just speaking on behalf of the experience with what we've done here. I am extremely happy with the upgrade we did, and these things still continue to surpass my expectations. If you'd like any more specific information videos pictures feel free to contact me directly. Thank you! -DJanotomus
@kylerkiesecker4166
3 жыл бұрын
@@MrDjanotomus have you heard the new ks118's? I'll be buying new and am stuck between the etx18 and those. Without replacing the drivers I'm wondering which sounds better. I've heard the etx was way ahead of the kw181 but I've also heard the ks118 is a big improvement to the kw. But is it better than the etx?
@MrDjanotomus
3 жыл бұрын
@@kylerkiesecker4166 I have not 😬 I understand why you're torn between them. I do feel that the EV amps are superior, but having a set from the factory that you don't have to part with is more ideal. Can you get them locally? This would help with the return policy and give you a chance to test them. But of course times are a little different right now.
@damienlobb85
3 жыл бұрын
@@kylerkiesecker4166 Check out the Yamaha DXS18XLF. They are just a hair quieter than the KS118 but sound superior with a bigger cabinet and hit lower. I also find they're more refined and clean sounding. I opted for them over the KS118. ALSO You can't go wrong with Yamahas 7y warranty.
@lawantukes7306
3 жыл бұрын
My sub just blew, found ur video and I didn't find any specific specs on the new drivers being talked about (seismic audio). Are these the right ones? 18" Raw Sub Woofer Speaker Model #: New Madrid Type: 18" Woofer/Speaker Power RMS: 750 Watts Power Peak: 1500 Watts Frequency Response: 25Hz-2K Hz Sensitivity: 102 db Magnet: 2x120 oz (240 oz total) Voice Coil: 4" Impedance: 8 Ohm Die Cast Aluminum Chassis Paper cone Cloth Edge Weight: 43 lbs each
@MrDjanotomus
3 жыл бұрын
Hi Lawan, yes those are them! They've been on back order for some time. You can sign up to get notified once they are in stock, through the website. And a Coupon for signing up when it is time to buy. Hope this helps!
@4l3x97
5 жыл бұрын
How much power does the etx have after the Upgrade?
@MrDjanotomus
5 жыл бұрын
I am not certain the proper calculation from the original driver deviation at this time (will ask for recommendations). Each unit was rated @ 1800 Watts OEM, from a performance "guestimate" at least 2,000 Watts. I did not calculate or measure the power consumption vs components just yet. Thanks for asking and stay tuned as they will debut June 15th for one of our stages at DataBASS djanotomus.com/databass Let's see how everything holds up after 8 hours of continuous professional use!
@4l3x97
5 жыл бұрын
@@MrDjanotomus okey Thanks. But are the original woofers in the etx so bad? Do they distorted a lot at higher volume?
@MrDjanotomus
3 жыл бұрын
@@4l3x97 They did not have the low-end performance for our Bass Music DJs we needed and consumed excessive power attempting to compensate to get there. Yes, they did distort at high volumes under our testing. The drivers are stronger than the amp, so the limiter automatically brings them down prior with no cut-out or damage to either component. Still today, VERY awesome combination and we are using them as monitors for our bigger stages. Thanks for your question!
@bigtsentertainment
4 жыл бұрын
How is it holding up? I need to replace a blown ERX 18 driver
@MrDjanotomus
4 жыл бұрын
These are still going GREAT!!!! They are lined up for this weekend, two days back to back, 8 hours a day. Since the review put on at least 30 hours of hard use with NO issues. The original (BRAND NEW) drivers were blown the first night of use in alternative boxes after 6 hours of use. Not impressed with the originals. I am still recommending the Seismic Audio New Madrid 18" 100%
@dantonliam
5 жыл бұрын
And did you do any before and after measurements?
@MrDjanotomus
5 жыл бұрын
Hello! Unfortunately I did not take measurements. I know it would ideal if I did, apologies everyone. I will however take measurements in preparation for our next event and post back. The temperature will also be much more in favor, allowing for a much more accurate measurement. Excited!
@djgazaaka5000
3 жыл бұрын
Hey should I use Electro-Voice EVX-180B, In my 18sp ? It will not damage the amp right ?
@MrDjanotomus
3 жыл бұрын
DJGAZA, No, the amplifier should be fine with the EVX-180B Driver. In fact, I think this is an EXCELLENT swap choice! Please let us know how it goes! :) (ensure proper break-in, bring them in slowly to full output, you'll hear the subwoofer distort prior to the amplifier clip).
@djgazaaka5000
3 жыл бұрын
@@MrDjanotomus but the thing is the hole on the ev box is so big, i have to go and take look at it first.
@MrDjanotomus
3 жыл бұрын
@@djgazaaka5000 Here are the specs I found, this should fit well, however you don't 100% know until you try :) I like the 30Hz response on these. What type of music do you play, and what size room and audience? We used these AGAIN two more times in the last 2 weeks and again next weekend for a wedding, (150 guest size area). They just keep GOING and GOING! Mains for small setups, Booth for large setups. pdf.textfiles.com/manuals/STARINMANUALS/Bosch%20-%20EV/EVX-180B.pdf
@MrDjanotomus
3 жыл бұрын
@@djgazaaka5000 Connect with us directly if you wish, email: info@djanotomus.com
@djgazaaka5000
Жыл бұрын
Hey me again, what you think about JBL srx818sp VS the ev ?
@jameswindham2360
5 жыл бұрын
I have two, I can only play at 100... anything below that... awful... I have two lowriders I am thinking of putting in these boxes.... your thoughts? I had some Eliminators I had to change the woofers in those also... like you said... night and day... I like Electro Voice boxes, Woofers leaves alot to be desired. thanks in advance...
@MrDjanotomus
4 жыл бұрын
Hi James, I encourage trying the Low Riders. I've had great success with them in the past as replacements for the MTL series. My favorite thing about the low riders is that they are easily serviceable and cost effective.
@MobilediscowirralCoUk
4 жыл бұрын
18HP1022 Faital Pro Neo 😋😍👌🏻
@JMang101
2 жыл бұрын
Did you just say the frequency response for EV ETX18SP is NON-EXISTENT under 140hz (6:33)?! I found that very hard to believe; perhaps you were being very sarcastic...I own one of these and they pound. "Terrible" under 140hz is quite a bit of an exaggeration...
@MrDjanotomus
2 жыл бұрын
Hi Joji George, I mean no disrespect, and this was my unfiltered, unplanned and genuine response to the first impression of the factory subwoofer performance versus the same unit with just a simple driver swap. I promise you, switching from the factory-loaded EV driver to the one I used yielded a SIGNIFICANT increase in output performance as well as frequency response. There are SO MANY different variations to consider, however, we have been using these almost EVERY since and in EXTREME abusive applications with NO issues and nothing but compliments. I LOVE these models and designs, but the driver was a bottleneck to really unlock the quality of the cabinet, amplifier, and the DSP within. I'd love to share more specific info with you if you are interested, such as pics, videos, and more! If you're interested, reach out :)
@JMang101
2 жыл бұрын
@@MrDjanotomus Gotcha.
@johanamarinez5757
2 жыл бұрын
Compartir esa informacion con mi usuario
@granttarget8436
2 жыл бұрын
Who makes the EV 18" Speaker?
@MrDjanotomus
2 жыл бұрын
Hi Grant, I believe EV is a U.S. Based MFG and Distributer in Burnsville, Minnesota. The Subwoofer we used for the swap is Seismic Audio, based in Memphis, TN.
@granttarget8436
2 жыл бұрын
@@MrDjanotomus thanks for responding. I have a yorkville cabinet here that uses Celestion speakers. Just curious if EV makes the woofer or do they source it out
@scottyahney8565
2 жыл бұрын
Under 140 hz the EV driver doesn't exist ?? That's a pretty strong statement. I think your numbers are wrong
@MrDjanotomus
2 жыл бұрын
Hi Scott, it's an exaggeration however the LF response is not good at all with those specific drivers. And the power consumption needed to subharmonic synthesize is impractical. Swapping the driver completely addressed that, which is necessary for our setups which drive very low frequency bass music in addition to full range needs.
@deejayEBRIO
5 жыл бұрын
Hey Douglas. How’s this setup working for you? I blew a speaker and wouldn’t mind the upgrade
@MrDjanotomus
5 жыл бұрын
Very happy so far, no issues.
@MrDjanotomus
5 жыл бұрын
Added update from the last two recent events. Absolutely love them!
@MrDjanotomus
4 жыл бұрын
Did an outdoor movie theater and Pole Barn Fest with these. Still going VERY strong!
@johanamarinez5757
2 жыл бұрын
a los sub ekx 18 sp tambien le cambiastes el controlador por el byc ? cual usastes tengo dos sub iguales y quiero que suenen mas duro y mas profundos @Douglas Johnson donde
@cliffpagdilao7744
7 ай бұрын
Eminence omega pro
@infoboothsnbeats5689
5 жыл бұрын
What are the difference in weight between stock and the upgrade? What do you suggest for a lighter 18" neodyme upgrade?
@MrDjanotomus
5 жыл бұрын
Hello! The weight difference between an Electro-Voice F.01U.278.393 / DVX3180 and a Seismic Audio New Madrid Driver is about 20 lbs. The SA Driver itself is 43lbs. I would REALLY like to test (and hopefully recommend) B&C or RCF Neodymium Transducers as a lighter and powerful solution.
@twan413
5 жыл бұрын
Great review. Question how do the Rockville 18s compare to the etx18s?
@MrDjanotomus
5 жыл бұрын
Hello twan 41, I am so glad you asked! I replaced two Rockville RBG18FAs with the EVs. The Rockville's are truly the best bang for the buck however fell short in reliability and other areas. The Rockville's arrived damaged, the enclosure was practically made of pressed paper. The screws were not strong, the units were very heavy and overall cheaply built. I did not even understand how they were "folded horn" designed. They were essentially front firing subwoofers. Also, these rattled (poor quality screws and insulation) and have NO protection if overdriven. I lost two subwoofers during an event. They were fried! And the capacitors starting walking out of the amplifier boards. One amp also fried due to this. I had to completely rebuild these which I used Rockville components, which cost me over $300 after 5 uses. Then I sold right after, both for $500 which was market value just last week. The EVs are much more durable and higher quality. I am going to test them and see if they can withstand reasonable abuse, time and elements this summer, especially with the upgraded drivers, Stay tuned!
@twan413
5 жыл бұрын
@@MrDjanotomus Thank you I think I will stay away from them. I was going to get them for a backup sub but I'll stick with the ev etx18s good luck with yours
@isaackukuk9915
5 жыл бұрын
They do not at all 😂
@djteknovibe93
4 жыл бұрын
So let get me get this right you bought some EV subs and didn't like them so you put different drivers in? You were better off taking the subs back and replacing them with something like the JBL SRX818 or something.
@MrDjanotomus
4 жыл бұрын
Hi DJ Teknovibe, I personally like the Amplifier, DSP Configuration and Cosmetics of those EV Subs. I already had spare 18" Drivers available so within an hour had both swapped and working. I swapped the original EV Drivers into a couple Cerwin Vega Folded Horns which needed 18" drivers very similar to the EVs. We've since used these for several small to medium sized events (+- 150 people, 3,000 square ft indoor and outdoor) with NO issues and compliments, even from other audio enthusiasts regarding clarity, power and appearance. For some applications, I entirely agree with you. For these, I am glad we experimented. Thanks for watching and sharing feedback!
@jitbass.
2 жыл бұрын
Is THAT A NISSAN 240sx??????????????????
@MrDjanotomus
3 ай бұрын
Yes it is!
@djteknovibe93
3 жыл бұрын
You took out EV drivers to put in cheap Seismic Audio ones in? Foolish. If you want decent drivers in there try 18 Sound 18W1001 they're proper drivers.
@MrDjanotomus
3 жыл бұрын
Hi DJ Teknovibe, We appreciate & respect your recommendation. 18 Sound Drivers are fantastic, but still pricy compared to these SAs, which were spares (free). We used these at 12 Events since this video was created and they outperformed even the QSCs in other rigs (multiple stages). We also primarily use these for booth monitors as our Mains exceed 80,000 Watts. The added weight of the ferrite also keeps these cabinets in place.
@djgazaaka5000
3 жыл бұрын
How those subwoofer keeping up now? Any issues?
@MrDjanotomus
3 жыл бұрын
DJGAZA we've been banging them as mains or monitors almost EVERY weekend for 100+ person events the last several months with NO issues. I even bought two more SA drivers just in case. They are currently on back order and sold out in less than 3 days the last time they restocked them. We are still very pleased and since have also helped others, on a budget with performing the build. We will be making a video on the install soon. Thanks for watching!
@djgazaaka5000
3 жыл бұрын
@@MrDjanotomus oh okay, because I was going to buy the new Qsc subwoofer, but the ev sounds better to me, I’m getting them in 2 weeks.
@MrDjanotomus
3 жыл бұрын
@@djgazaaka5000 Both are great competitive designs. I prefer the EVs, because I've has such good luck with them, and have all EV Tops. Wish you good luck on your journey! Cheers!
@djgazaaka5000
Жыл бұрын
Hey, how is it vs the Qsc ks118 now?
@mrproblemchild88able
2 жыл бұрын
B&C woofer
@fnasctatic
4 жыл бұрын
Anyone have a woofer recommendation for the ekx18sp? The oe woofer is a really cheap one...
@reginalddejoie2165
4 жыл бұрын
Daniel wennström Can’t go Wrong With B&C TBX 100 Woofer Super Powerful Decent price
@Djalexboston
2 жыл бұрын
were you able to buy the b&c and how are you doing
@abielpangga6314
4 жыл бұрын
Step one Go to google Step two Search xoc 1 th18 plans Step three Build the box Step four Buy a b&c 18sw115 and load inside the box Step 5 Enjoy (it will probably sound as loud as 4 etx18sp)
@djmix105
2 жыл бұрын
You can tell dude is not a fun of EV, he is more complain l, downgrading them.
@techvideotron6127
2 жыл бұрын
just Bla Bla Bla Bla Bla
@349woodstock
3 жыл бұрын
The Driver that comes in the etx 18sp is junk! I upgraded to LAVOCE SAF184-03 night and day difference! I can't stop laughing !
@MrDjanotomus
3 жыл бұрын
Awesome!!!! Glad it's working out! Again, every comment is another event or two later and these things KEEP POUNDING!!!! :)
@Djalexboston
2 жыл бұрын
did you buy the neudimium version or the regular large magnet version? Thanks
@dennisondenatalie
3 жыл бұрын
So you took a high end speaker and replaced its proprietary driver with a cheap shit SA driver. You wasted some serious money by doing this, and probably ruined the sound of the ETX’s, and eventually you’re going to destroy the cabinets. Those cabinets are only meant to be used with the EV drivers... that’s why it’s designed how it is.
@MrDjanotomus
3 жыл бұрын
Hi Dennison, the native drivers were very low quality. In fact, we toasted them with ease. I understand that you may classify SA as cheap, but NOT the New Madrid 18s. They are extremely well designed and high quality, for SA. We have at least 80 hours on both subs since the swap with NO issues. We outcompeted several other rigs running more power than us with these in dBC. "IF" the cabinets fall apart 5 years from now, from how much we've used them, we've got our value out of them.
@lckite9823
2 жыл бұрын
@@MrDjanotomus also I dont think a wooden cabinet can be destroyed so easily so idk what he is talking about
@MrDjanotomus
2 жыл бұрын
@@lckite9823 we've been using these almost every weekend, full tilt and still have not had a single issue. So, it's safe to say these have already stood up the test of time. We stand behind this modification 110% 🙂
@truthbtold8634
Жыл бұрын
That's why we professionals buy drivers with the same specs and better quality.
@markguilaran
Жыл бұрын
I have 8 of these subs and at the time there were no replacement subs or cone kits available. I tried the Madrid SA's and they sound great in the cabinet. Although I haven't had any problems with my other ETX18SP's, I would have no problem using the SA's.
Пікірлер: 160