This is very good!!!! I was thinking of getting one of these and trying to mod it in a similar way! Your method of measuring FOV is genius! I have the vr006 and always wanted to have an idea of the difference in fov
@fpvguys5983
6 жыл бұрын
Daniel Singer thanks man! I really appreciate it. I actually am getting some fatshark teleporter v2's on a trade. I'm gonna do a video on the difference between the two. I really recommend getting these though. Especially are this mod. No issues with the image.
@DanielSingerX
6 жыл бұрын
Very Nice :D I'll be looking out for that!! and i feel i may very well get one of these as ive herd great things minus the smaller FOV
@michael3573
4 жыл бұрын
Thanks, I’ll be doing this mod this week. Great video.
@ShireGanj
3 жыл бұрын
You can actually remove the foam and Velcro from the face plate and replace it onto the goggles with a little bit of trimming. It’s much easier than this vid describes. Use a hair dryer to loosen the Velcro glue than restick to the goggles
@zeussdog1708
5 жыл бұрын
Very good mod man, great work.
@FlyerTuck
6 жыл бұрын
Thin the foam on the face-plate. The new ones come with a thinner foam and its plenty good enough.
@fpvguys5983
6 жыл бұрын
Kelly Perry this was after using thin fat shark foam.
@FlyerTuck
6 жыл бұрын
10-4...I know absolutely nothing about anything Fat-Shark and never will.
@changeagent228
6 жыл бұрын
So now they are just a little less FOV than Aomway commanders at a third of the price. Well done! 😄
@fpvguys5983
6 жыл бұрын
Change Agent thanks!
@changeagent228
6 жыл бұрын
FPV Guys I bet you could shave it closer too. Those square stick out edges on the lens could be leveled. Foam a minimum thickness of 1 or 2mm. I can imagine those who are extreme clipping their eyelashes off so they can get their eyes real close haha.
@fpvguys5983
6 жыл бұрын
Change Agent possibly. I'm gonna try the fresnel lens first.
@changeagent228
6 жыл бұрын
FPV Guys Good luck with that. I have subbed so look forward to a future video. 😃
@fpvguys5983
6 жыл бұрын
Change Agent thanks . I appreciate it!
@gildardo
6 жыл бұрын
Great work..
@djvaliro
6 жыл бұрын
so how much distance did you gain ?? .. was thinking designing a new deformed faceplate for 3d printing but need to know how much i can go fwd. still in my opinion these googles need some better optics to improve the screen size. thanks for sharing.
@fpvguys5983
6 жыл бұрын
yo8aiv I agree, they need better optics. I illustrated how much you gained within the video. You could probably design a sunken in faceplate.
@djvaliro
6 жыл бұрын
FPV Guys there is a way to remove tunnel effect/fov. Just made it. See rcgroups.
@fpvguys5983
6 жыл бұрын
yo8aiv I'm checking that out!
@adamhun994
2 жыл бұрын
@@djvaliro do you happen to remember which topic was about this mod on rcgroups?
@djvaliro
Жыл бұрын
@@adamhun994 no sorry, it's long time ago.
@Gillybearuk
4 жыл бұрын
Just put credit card magnifier glass lens ontop of optics and it will be 3X size costs £2 simply cut the credit card magnifier to size and whallar
@peterzingler6221
4 жыл бұрын
Does this really work? Since I'm planning to cut an old fresnell lense to archive that
@softstart100
6 жыл бұрын
Is the modification in your opinion still good or have you realised anoth way to get a better view. This weekend is when I engage in performi g the mod along with diversity.
@fpvguys5983
6 жыл бұрын
Ron Griese it's still worth it. If you have a 3d printer you can do the lens spacer mod. Which removes the tunnel effect. It didn't help with fov, but makes it easier to see the entire screen. Check out rcgroup about it.
@fpvguys5983
6 жыл бұрын
Ron Griese I accidentally removed your comment... But yeah that mod looks cool. I hear it's pretty difficult to do though.
@diereken
6 жыл бұрын
interested to see if the fresnel lenses work
@fpvguys5983
6 жыл бұрын
Justin Scholtemeyer I really should order some. The smallest ones I can find are credit card size. I'll need to cut them up. I'm interested too.
@songhopak5943
6 жыл бұрын
does anti-fog fan does what it's supposed to do after this mod?
@fpvguys5983
6 жыл бұрын
Songho Pak I haven't had any fogging issues. I haven't needed the fan yet. But I think it'll still work.
@fpvguys5983
6 жыл бұрын
My goggles fogged up today while resting on my forehead. The fan works fine with this mod.
Пікірлер: 35