I got the same code. 7 red flashes. Do you think i have to change the valve?
@mariomaldonado518
5 жыл бұрын
Besides that the ignitor does not glow.
@34canderson34
5 жыл бұрын
The lock out is just a saftey feature so gas won't keep flowing with no ignition. If your igniter doesn't glow, I would guess thats the problem. Also check the voltage going to the valve before replacing. Last, I'm just handy but have zero experience with hvac besides this.
@mariomaldonado518
5 жыл бұрын
The problem was the flame igniter. Thanks for your help.
@tommytutone7539
5 жыл бұрын
We have a very similar issue. Had the same part changed but the furnace still goes into lockout the odd time. It's not consistent. Leading me to believe it's a pressure issue still. Cleaned both flame sensor/igniter. The only thing I can think of is the furnace service tech before doing a pressure test and confirming and changing the internal regulator went out and increased pressure on the tanks regulator which may now cause excessive venting. I have no clue at this point what else could be the problem and will most likely have to call them back as the cold season is right around the corner.
@mariomaldonado518
5 жыл бұрын
I change the flame igniter and problem solved. Thanks for your help.
Пікірлер: 11