My GOD!!!! I don't have a Morningstar but I have been searching for a video on HOW TO CONTROL THE H9 Via MIDI ! I'm using a HELIX as the controller, and this video FINALLY made things exceptionally clear! Thank you so much, MORNINGSTAR!!! I Completely understood EVERYTHING inan 8 minute video. Most videos go on and on and on 30-45min video with midi over USB, onnecting to a DAW blah blah etc. You have delivered a perfect, clear, precise explanation on using the H9 with an actual midi cable plugged into a good midi controller with a much needed explanation on the H9s, once, mysterious midi inner workings! Its all very simple now !!!You jave unlocked the H9 for me, and its F-ing AWESOME!!!!! Again thankyou.I will absolutely pick up a Morningstar to control my smaller travel rig !!
@duncancartledge1667
3 жыл бұрын
Hi. You can also use the MC 6 to switch effects on and off within the Spacetime algorithms. CC 23 =Mod level, CC 25 = Reverb level and CC 28 = delay level . Use the virtual faders to set the level. Using this basically gives you a pedal board.
@Mr_A_Mia
3 жыл бұрын
Finally! Thank you for this! This was much needed. I think more videos like this with other “popular” pedals that would benefit using a morningstar unit should also happen. Just a thought cuz this vid is way over do and lots of help. Thank you again!
@stephendouglas9423
3 жыл бұрын
For Real! Not enough stuff like this.
@78thandSynth
2 жыл бұрын
I’m so close to jumping in. H9 and Blue Sky have opened the “oh that’s why” portal. Thanks a lot for the edu.
@MatthewSpringer
3 жыл бұрын
That message Slider window is awesome.
@zbqb84a
3 жыл бұрын
My MC3 arrives on Monday... can't wait. 😁
@JeeWeeDonkers
3 жыл бұрын
Thanks for this. I spent all week figuring out 85% of this myself... ;-)
@giorgiodeninno
3 жыл бұрын
Morningstar controller and Boss 500 series, please!🔥🙂
@ovrholofficial
3 жыл бұрын
Yes please 🙏
@javiervicuna1275
3 жыл бұрын
pleaaasee!! teach me how to setup the waveform to use it as a Whamny my H9+Mc3
@vicvaughan997
2 жыл бұрын
Can you please show the MC6 with the new Eventide Tricerachorus Pedal?
@Adam-th2ws
2 жыл бұрын
Hi! Can you do a midi tutorial with the Poly Beebo?
@kittensinkmusic
3 жыл бұрын
could you please cover Poly Beebo? and Zoia? (Beebo first, though) thanks xoxoxo
@MarsGuitarOfficial
Жыл бұрын
Good explanation but can you turn on and off to use multiple effects at the same time using the midi foot switch?
@MorningstarEngineering
Жыл бұрын
Hi. The H9 can only run one effect at a time. If you need more than that, the H90 will allow you to run 2 effects at once.
@MarsGuitarOfficial
Жыл бұрын
@@MorningstarEngineering thank you 🙏
@russellgrant1797
Жыл бұрын
I just bought an MC6 because of this video (had so much trouble figuring out my last midi footswitch, I ended up selling it). I would love to be able to not just select the preset using the MC6 but activate the H9 with 1 foot tap (tapping the same MC6 footswitch would turn the pedal off). Can this be done? Perhaps I could hack it by creating a preset that is just a tiny amount of reverb so the H9 is always on but I'm just using it to control presents...
@MorningstarEngineering
Жыл бұрын
Hi! Please send us an email at ‘help@morningstarfx.com’. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily.
@brendodorset3720
2 жыл бұрын
hi, I have a question: can this MC6 send a 'play/start' message on akai MPC one? I know it can send 'stop' and 'play' message. but what I need is a "play/start" message so that the sequence returns to its beginning and plays without any latency when the pedal is pressed.
@MorningstarEngineering
2 жыл бұрын
Hi. Yes, our MIDI controllers can send MMC messages - morningstarengineering.atlassian.net/wiki/spaces/MMS/pages/181698784/MIDI+Type+Glossary#MIDI-MMC For further assistance, please send us an email at ‘help@morningstarfx.com’. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily.
@jomarivera8670
3 жыл бұрын
Awesome! May I know what brand of midi cable is that?
@MorningstarEngineering
3 жыл бұрын
Hi! That's One Control's MIDI Hammer. We did a MIDI cable shootout review here if you are interested: www.morningstarfx.com/post/the-midi-cable-review
@miguelperez1793
3 жыл бұрын
How can I connect the H9 and MC8? I have the H9 midi setting Thru and I tried the whole PC messages and it won't recall any presets from my H9 to MC8. Help please.
@MorningstarEngineering
3 жыл бұрын
Hi. Please send us an email at help@morningstarfx.com. We provide technical support from there. A service ticket will be created for you and we will be able to follow up easily. Cheers!
@user-hf9ms3nt1w
2 жыл бұрын
Excuse me, may I ask a question...... I Want to use more than one effect, can it ? For example usding delay and tremolo and reverb at the same time. Thanks (and sorry for my poor English)
@MorningstarEngineering
2 жыл бұрын
Hi. The H9 functions as one effect at a time only.
@Polarisfff
2 жыл бұрын
Thats not correct. One Algorithmus at one time. Spacetime has for example one Algorithmus with delays, Modulation and reverb, I think. So, search a Algorithmus with the effects and customize it.
@basswolf86
3 жыл бұрын
Nice! Can Cross Midi Thru work on other devices like the Helix HXFX or Stomp?
@MorningstarEngineering
3 жыл бұрын
Yes, it works for all devices. It simply relays MIDI messages that a Morningstar controller receives via USB out through its MIDI out ports.
@wences71
2 жыл бұрын
so you can set 2 buttons for up and down and another 4 for 4 favorites pre sets? for example? or 1 for tuner and 3 for favorite effects?
@MorningstarEngineering
2 жыл бұрын
Hi. Yes, every switch is independently customizable to send any MIDI messages you want.
@wences71
2 жыл бұрын
@@MorningstarEngineering Thank you so much!
@PhilDoughty
3 жыл бұрын
How to reset the MC6 back to default factory settings?
@MorningstarEngineering
3 жыл бұрын
Hi. You can reset the MC6 from the global configuration menu. Explained in the manual here: morningstarengineering.atlassian.net/wiki/spaces/MMS/pages/753729538/MC6+MkII+User+Manual+firmware+3.8#Global-Settings
Пікірлер: 36