Lol the constant moving of the truck to get it right was hilarious, 100% can relate.
@thegreenerthemeaner
3 жыл бұрын
I don't have it on this trailer yet, but last one had a 2" reciever hitch on it to use a hitch plate mount. Use it in your truck when trailer isn't on, remove to deter theft. I use electric fork lift quick connector to hook up power in either application. You can add a battery if need be on the trailer. You can use that connector to help your hydraulic tilt battery live longer and also for your dump trailer. Make a set of jumper cables to plug into it for those side of the busy highway jump starts.
@rcmike09
4 жыл бұрын
When backing to a trailer. Before you get out, set the parking brake. The truck won't move and will save you 3 trips.
@Badger1776
3 жыл бұрын
Wow. 32 and never knew this.
@jaredherrera8664
2 жыл бұрын
I thought this was common knowledge🤣🤣
@repairvehicle
4 жыл бұрын
Keep battery in the box and away from moisture and dirt. Add to the box top a solar panel and it will keep your battery always charged. There are companies that sell complete kit for this purpose.
@anthonyhenry5500
4 жыл бұрын
Run the power and ground wire out of trailer plug from the truck. Then when ever the truck is hooked up and running it will charge the battery on the trailer
@WadeRacing
4 жыл бұрын
Tractor supply has nice winch covers that fit the harbor freight winches and aren’t to horribly priced
@joshdedeke2275
4 жыл бұрын
Wow a morning video. Keep up the good work Tom.
@dodgeman4046
4 жыл бұрын
I just run a big winch quick disconnect on my trailer and its wired to the batteries on my tow rig so there's no worry of a dead battery on the trailer. I also made up a set of jumper cables with the same connection on 1 end so I can jump start from the back of the truck or if someone borrows my trailer they can just hook up the jumpers from the trailer to a battery. Its been flawless for years
@jeffrob073
4 жыл бұрын
Harbor Freight has gotten better, depending on what ya buy
@matt72991
4 жыл бұрын
i have a battery on my trailer in the center of my A-frame. i ran a 4 gauge power lead off my truck batteries to an Anderson connector to charge the trailer battery and to idle if i need more power when winching something onto the trailer. works great.
@monkeymoney7830
4 жыл бұрын
matt72991 me too 🤙
@matt72991
4 жыл бұрын
@@monkeymoney7830 works great even if the trailer battery is dead. That's the main reason I did it this way
@monkeymoney7830
4 жыл бұрын
matt72991 I usually keep the battery in the garage on a trickle charge I don’t leave it on the trailer got a hitch pin for quick wench removal to many thieves where I live
@smoke_me_broke_pulling_team
4 жыл бұрын
You could mount the battery on the right side of the trailer, opposite your jack parts you want to avoid, hang it in the opening on that side
@tylersarmiento6064
4 жыл бұрын
You need to come up with something to hook the winch to on the truck so you don't damage any fiberglass pulling it onto the trailer
@frankboggs
4 жыл бұрын
Use the truck battery and run long cable to back and get a Anderson plug
@zachcooper3270
4 жыл бұрын
Tom. Mount your battery on opposite side of the kick stand. So passenger side of the big jack behind the box. Easy access if ever need to get to it.
@lordrichard8184
3 жыл бұрын
You could install some quick connects, I think they might be plow connections. But I know tow truck use them, so they have the quick connect coming out of their grill and they can plug in a set of jumper cables. This way they can jump a car and not have to pop the hood and hook up cables. You could put the quick connect at the back of the truck and then run (jumper) cables to the winch. Or make a set of quick connect cables that live on the winch. Then you don’t have to worry about mounting and maintaining a battery on the trailer
@blankzr0185
2 жыл бұрын
might be late but pro tip when getting your truck ready to hook up from reverse put it in drive then straight to park to prevent it from rocking like that because you had it spot on the first time
@robchopshopdually
4 жыл бұрын
I put a agm battery under my trailer on its side it powered the load lights trailer winch and brake away controller all with one battery box has switches in it and it charges off the truck and has 120 converter on it so I just throw a Extension cord on it when I get home
@talkingcargojunkremoval
3 жыл бұрын
@canuckguy worried... You a fool for that one homie. Lmao 😂😂😂
@MrTackleberry79
2 жыл бұрын
Save space in the box by rotating the jack 90° and store it in place. Also, where is your spare for the trailer?
@mesanders1113
2 жыл бұрын
Get some thick battery cables and run them to the rear of the truck and a pigtail coming off the winch that way you don't have to mess with a extra battery or charger
@davidschmidt449
4 жыл бұрын
I’d put the battery Under the trailer and put a splash shield around it. If it’s in plane site it may not stay there long till someone borrows it without asking.
@Traveling_Solo_fg
3 жыл бұрын
n you add a battery Box on that front rail next to that box thats on the front rail , easier for service , protected from rod debris and closer to the winch, , less battery cable to the winch .
@boomer5030
3 жыл бұрын
Don't forget the disconnect switch, they're costly but will save the winch and battery!!
@therevestor
3 жыл бұрын
Im interested in how this setup has served you and what changes you would now modify. I am getting this same Iron Bull trailer this week.
@TurbaTom
3 жыл бұрын
Love it and haven't changed anything. I run the winch off a jump start pack currently.
@monkeymoney7830
4 жыл бұрын
I mounted mine low not to get the cable into the bumper of the loading vehicles
@williamtobin684
3 жыл бұрын
Willy tech nice sweat shirt
@TurbaTom
3 жыл бұрын
Yes sir!
@Leon-wz1js
4 жыл бұрын
never leave the tailgate down while moving the truck with the trailer attached. Turn and you'll dent the top of the tailgate on that storage box you installed. Found that out the hard way.
@billybobjoe198
3 жыл бұрын
Winches are the kind of thing that don't work when you need them. I got a smitty built winch, welded up a framework sort of like yours, kept the winch off the deck and raised it a bit to give the lead a better angle. After installation played with it and wound it up. Then when I needed to actually use it it was dead. 0 pulls.
@resto-sk7be
3 жыл бұрын
Por 15 doesn't have uv protection you need to top coat it.
@scottnichols5402
4 жыл бұрын
If I had a car trailer I wood do the same winch setup you have on your car trailer I wood put the battery in the tool box and if your wondering what that little black wire is for on the winch that is the ground wire you take the bike Blake wire and the small black wire and you put those 2 Blake wires under the winch Motor and that makes the ground for your winch
@tradrodsandcustoms
2 жыл бұрын
Extend your cables and move the winch control box into your tongue box and that winch will last waaay longer
@mrlariata9290
4 жыл бұрын
My next winch is from harbor freight. I have a warn winch now and not that excited on its performance. Friends have had warn winches and they are a 40 percent winch.
@jerrybaker6991
4 жыл бұрын
Put the battery in the box.
@jfeekes2011
4 жыл бұрын
Would the battery fit on the passenger side behind the box u mounted? Easy access if u ever need to give it a charge and still out of the way of ur quick release on the jack and leaves the box open for other storage 🤷🏼♂️
@robsheredy810
4 жыл бұрын
I buddy of mine ran wires from his truck battery and put a quick connect by the rear bumper to plug his winch into so no battery on the trailer
@skycowboy_7391
2 жыл бұрын
Rest In Peace
@deejaycura1
2 жыл бұрын
What size welding rods are you using?
@anthonycarter5300
3 жыл бұрын
Would you be able to do single car local towing with this type of set up?
@driverx57
3 жыл бұрын
Impressively you had it perfectly lined up when you backed the first time but forgot to account for transmission roll in the gear you were in, little tip, for what it's worth, put it in the opposite gear from what you're in, with your foot on the brake next time and it won't continue to roll when you put it into park, just sayin..
@chrisgrantham2341
2 жыл бұрын
its called a tailgate camera!!
@kw57rx8dr.9
2 жыл бұрын
@@chrisgrantham2341 Well that too but I've been using that technique and I look down at the ground with my door open and estimate how far I have to roll when I'm close enough and using those for years long before technical driving crutches and people are astounded at how accurate I am.
@hoppy760
3 жыл бұрын
where did you get that toolbox?
@JohnC-kc5uh
2 жыл бұрын
The winch sits too high, that's only my opinion, as the car getting pulled on the trailer the cable will start to rip up on the front bumper. Just saying
@jamesmcguire1271
4 жыл бұрын
High winch is not good for bumpers, Hopefully only putting tall truck on the trailer
Пікірлер: 52